Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Research on Creep and Fatigue Characteristics of MSIV at Elevated Temperature in HTR

Creep Fatigue Analysis of the 316SS Monolith in the MegaPower Heat Pipe Reactor

Thermo-mechanical Stress Analysis of Feed-Water Valves in Nuclear Power Plants

Development and Validation of Thermal-Mechanical Creep Failure Module for Reactor Pressure Vessel Lower Head

Creep behavior and life prediction of a reactor pressure vessel steel above phase‐transformation temperature via a deformation mechanism‐based creep model

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Study on Pressure Relief Transient for High Temperature Gas Cooled Reactor

Securing integrity of high-temperature pressure boundary components in supercritical thermal plants with application of alternative design rules

Creep-fatigue life estimation of circumferential welds in thermal high energy piping systems

Creep Performance and Microstructure Evolution of IN617 at 950 °C for VHTR Applications

Numerical Study on a Single Square Cylinder Subjected to Vortex-Induced Vibration in HTR-PM

Coupled irradiation-thermal-mechanical analysis of the solid-state core in a heat pipe cooled reactor

Thermo-Mechanical Analysis of Instrumentation Guide Tube Failure During a Severe Accident in a Nordic Boiling Water Reactor

Creep-Fatigue Life Property Of P91 Welded Piping Subjected To Bending And Torsional Moments At High Temperature

Expansion of High Temperature Creep Test Data for Failure Evaluation of BWR Lower Head in Severe Accident

Creep Rupture Mechanisms and Life Prediction of IN617 for VHTR Applications

Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions

High-Temperature Tensile and Creep Behavior in a CrMoV Steel and Weld Metal