Abstract:Under some postulated accidental conditions, the secondary loop of the reactor needs to release its pressure for consequent system action. During the pressure relief transient, the residual fluid mixture of water and the steam will pass through the heat-exchange tubes of the steam generator and the live-steam pipeline, which decreases the steam generator pressure and the steam generator temperature due to taking the heat stored in the components away. The pressure and the temperature during the transient needs to be controlled to protect the steam generator from the potential damage. A 250 MWth high temperature gas cooled reactor is selected to evaluate this countermeasure effect during the pressure relief transient in this paper. A thermal-hydraulic system analysis code is used for modeling and simulating the pressure relief transient after the accident occurs. The temperature change of the fluid and the components in the steam generator are relative to the pressure relief transient, which is dominated by the design of pressure relief valve. Larger diameter of pressure relief valve will result in more intensive blown-down transient which causes faster pressure decrease and stronger heat transfer between the inside walls of the components in the secondary loop and the fluid. The designed pressure value where the pressure relief valve closes will affect the transient also. The designed pressure value dominates the time of the pressure relief transient which affects the amount of the fluid from the pressure relief valve. Different amount of the fluid will take away different quantity of heat from the components in the secondary loop of reactor. The pressure relief transients with a series of different diameter of pressure relief valve under some typical designed pressure value were simulated and compared. The results indicate that the pressure and the temperature of the steam generator during the pressure relief transient could be controlled effectively with reasonable design on the pressure relief system, which will provide protection and benefit for the steam generator after the postulated accident.

Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Numerical Simulation and Structure Improvement of Double Throttling in A High Parameter Pressure Reducing Valve

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Parametric Analysis on Throttling Components of Multi-Stage High Pressure Reducing Valve

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Development of a novel high pressure electronic pneumatic pressure reducing valve

Simulation and Research of Pressure Regulator Valve in Boiler Feed-water Turbine Governing System

Turbulent Compressible Flow Analysis on Multi-Stage High Pressure Reducing Valve

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve

An Experimental and Numerical Analysis on the Dynamical Behavior of a Safety Valve in the Case of Two-phase Non-flashing Flow

Study on pressure relief system design for high temperature gas cooled reactor

Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation

Dynamic Analysis of a High-Pressure Relief Valve During Opening

Numerical Analysis of Flow and Temperature Characteristics in a High Multi-Stage Pressure Reducing Valve for Hydrogen Refueling Station

Advanced simulation of naval pressure relief valve

Properties of Pilot-Operated Water Hydraulic Relief Valve with Different Structure Parameters

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Numerical Simulation and Analysis of the dynamic Behaviours on the Spring-loaded Pressure Relief Valve