Abstract:Along with the need for western economic development, the number of long tunnel projects which go through mountains is constantly on the rise. In the process of construction, various disaster-causing structures are frequently exposed, which leads to many geological disasters. The traditional idea is that the reverse fault is not easily developed for an underground river, which means that the tunnel elevation design is not considered adequately. When some tunnels cross the bottom of the river, the fractures near the fault between the underground river and the excavation space may be activated and then evolve into channels, causing serious water inrush accidents during construction and operation processes. Taking the Qiyueshan Tunnel site as an example, on the premise of the anatomy of the control mechanism of the reverse fault on the development of the underground river, based on the multiperiod typical structural traces of the tunnel and surface outcrop, it was found that stratifications, dip joints, transverse joints, and tension joints of good aperture grade are important control factors. The cut block easily loses its stability and provides space for karst development, while intermittent uplifting of regional structures provides hydrodynamic conditions for the development of the underground river, causing the hydraulic gradient to be inconsistent in the overall underground river. Finally, the rainwater dynamic monitoring and tracer connectivity are data that can be fully utilized to demonstrate that a reverse fracture can control the development of the underground river. The authors further considered the effect of the vertical zoning of the fault structure and the excavation disturbance, and, drawing on the experience of the relative location of the same site in the same field, put forward the suggestion that the construction of the follow-up tunnel in the study area should be slightly higher than the elevation of the underground river. The research results can provide useful reference for similar engineering problems in the future.

Uuderwater Installation of Large RC Submerged Box Culvert Sections for Hong Kong Western Harbour Crossing

Innovative Technology in Channel Bridge Foundation Design and Construction of Pingtan Strait Hi-Rail Bridge

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Design Scheme and Structure Analysis of Dongwuyang Submerged Floating Tunnel

Environmentally Friendly Vertical Wall Breakwater with Culvert for Encircled Harbor Basin

Novelties in the islands and tunnel project of the Hong Kong–Zhuhai–Macao Bridge

Hong Kong Zhuhai Macao Bridge-Tunnel project immersed tunnel and artificial islands – From an Owners’ perspective

Installation of Integral Prefabricated Bridge Abutment and Pier with Flexible Water Stop Curtain

Technique in Large Caisson Construction of Central Reclamation Phase 3 Project in Hong Kong

Research on tubular segment design of submerged floating tunnel

Challenge in Design and Construction of Submerged Floating Tunnel and State-Of-Art

Challenges of constructing a twin 5.2 km long undersea fuel pipelines by HDD method

Comprehensive Application of Borehole Fine Detection Methods: A Case Study in Shantou Bay Subsea Tunnel

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Numerical analysis of cut-and-cover excavation part of a cross-river tunnel

Case Study of Rehabilitation of A Damaged Underwater Tunnel in the Construction Phase

Introduction of Construction Process in Shenjiamen Immerse Tube Tunnel and Problem Analysis of Grouting

Risk Research during Construction of Long-distance Non-locking Curved Pipe Curtain in Rich Water Soft Area

Excavation and Support of the Shallow-buried Section of Extra-large Tunnel

Settlement characteristics of immersed tunnel of Hong Kong-Zhuhai-Macau Bridge project

Study on Deformation Characteristics of Segment Joints of the Immersed Tunnel in Hong Kong-Zhuhai-Macau Bridge