Application of Pressure Accumulator on Hydraulic Elevator

Youwei Du

2006-01-01

Abstract:In this article the variable voltage variable frequency(VVVF) elevator with pressure accumulator is introduced and compared with those none,result indicates the VVVF elevator with pressure accumulator possesses higher efficiency and reduce the energy consumption evidently.

What problem does this paper attempt to address?

Energy-saving system applying pressure accumulators for VVVF controlled hydraulic elevators

Bing Xu,Xiaoping Ouyang,Huayong Yang

DOI: https://doi.org/10.1115/IMECE2003-42829

2003-01-01

Abstract:In order to improve the energy utilization efficiency of hydraulic elevators, an innovative energy-saving controlled system applying pressure accumulators in hydraulic elevators was brought forward in this paper. Firstly the working principle of the system was discussed and analyzed under different working status. Then the mathematical models of the system were established. Numerical simulations for the static and dynamic of the system were studied on the Simulink environment of MATLAB kits. Experiments on the upward and downward movement of elevator were done under different typical working conditions. Numerical simulations coincided with experimental results in general. Compared with other type hydraulic elevator systems, such as conventional valve controlled system, inverter controlled system, the system with pressure accumulators has the highest energy-saving efficiency. In summary, the innovative energy-saving system which runs steadily and comfortably, saves energy remarkably, has good potential for application in not only hydraulic elevators but also in other vertically reciprocating mechanical systems.
Comparison of Energy-Saving on the Speed Control of the Vvvf Hydraulic Elevator with and Without the Pressure Accumulator

X Bing,Y Jian,HY Yang

DOI: https://doi.org/10.1016/j.mechatronics.2005.06.009

IF: 3.379

2005-01-01

Mechatronics

Abstract:The speed control system of variable voltage variable frequency (VVVF) hydraulic elevator with the pressure accumulator has been designed, which is a kind of the innovation energy-saving hydraulic elevator. The control system of the VVVF hydraulic elevator with the pressure accumulator is analyzed, and the speed control of the VVVF hydraulic elevator with the pressure accumulator is studied using the PID control algorithm. The comparison of the experimental researches of energy-saving is carried out for the speed control of the VVVF hydraulic elevator with and without the pressure accumulator. The experimental results show that the VVVF hydraulic elevator with the pressure accumulator has higher efficiency compared with the VVVF hydraulic elevator without the pressure accumulator.
Recovering system of swing braking energy in hydraulic excavator

GUAN Cheng,XU Xiao,LIN Xiao,WANG Shou-hong

DOI: https://doi.org/10.3785/j.issn.1008-973X.2012.01.23

2012-01-01

Abstract:In order to recover the braking energy from the hydraulic excavator during swing phase,an automatic hydraulic-controlled braking energy recovery system was proposed which can automatically identify the swing stage by the pressure difference between inlet and outlet of the swing pump and determining distribution algorithm of the recovering energy.One normal school function was introduced.State of pressure(SOP) of the accumulator,the outlet pressure of the hydraulic pump and the feedback pressure from negative-flow control were considered as input signals.According to the real-time required power of the load,the energy distribution algorithm was proposed based on the comprehensive constant-power negative-flow control between the main power source and the auxiliary power source(that is engine and accumulator),which ensures the normal operation of the swing mechanism.Simulation results show that the hydraulic excavator equipped with the swing recovery system can achieve 16.3% energy saving compared with the baseline under the same working condition,and the overall chain efficiency from the total braking energy to the terminal swing mechanism is as much as 50.0% approximately while the swing is utilized as the actuator alone.
Pressure Regulation of Accumulator Based on Pressure Difference Control and Its AMESim Simulation

ZHANG Zengmeng,ZHOU Hua,SUN Jian,YANG Huayong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2007.06.034

2007-01-01

Abstract:A new pressure control method was brought forward to extend the application of accumulator.This method is based on differential pressure of the two chambers of hydraulic cylinder or supercharger.The backpressure of one chamber is regulated by proportional pressure relief valve,and then the pressure of accumulator is controlled.The typical design and parameters calculation of accumulator pressure control circuit for adding-pressure system with large flow rate were presented.AMESim simulation on the differential pressure control effect indicates the method can achieve the aim of control and improvement the applicability of accumulator.
Study on Installed Power of Hydraulic Elevators

LIN Jian-jie,XU Bing,YANG Hua-yong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.01.023

2005-01-01

Abstract:Aimming at valve controlled hydraulic elevator,many factors influenced on the installed power were investigated.Power choices of electromotor were analyzed in load power,total efficiency and electromotor’s working conditions,and the calculation method of electromotor power for hydraulic elevator was put forward.
New Investigation in Energy Regeneration of Hydraulic Elevators

Huayong Yang,Wei Sun,Bing Xu

DOI: https://doi.org/10.1109/tmech.2007.905691

2007-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:In the conventional valve-controlled hydraulic elevator, when the cabin moves downwards, the entire potential energy of the cabin is wasted and converted into fluid heat by throttling. Thus, the energy consumption of a traditional hydraulic elevator is much higher than that of the, traction elevator. To reduce the energy consumption and power installation requirements, the energy-regenerative hydraulic elevators have been developed since 1997. In this paper, different generations of the design are discussed for energy-regenerative system; in particular, a new generation is focused on in detail. Experimental studies of this new design are carried out to compare the energy consumption of different system designs of hydraulic elevator. Finally, a conclusion is drawn that the new generation of hydraulic elevator can achieve a significant energy-saving performance compared to the traditional elevators.
Energy-saving Technology of Variable Counterweight and Its Energy Consumption Analyses

杨华勇,胡东明,徐兵

DOI: https://doi.org/10.3901/jme.2010.02.132

2010-01-01

Journal of Mechanical Engineering

Abstract:To solve the disadvantages of high energy consumption and low efficiency in hydraulic lift system,an innovative energy-saving technology of variable counterweight is proposed. The energy-saving concept is given and the working principles of two kinds of variable counterweight system are introduced,namely variable hydraulic counterweight and mechanical counterweight with variable speed. And the system applying the variable hydraulic counterweight is discussed in detail,including the installed power,the energy consumption,the efficiency and the poor working condition. Compared with the conventional variable voltage variable frequency (VVVF) hydraulic system,the installed power and energy consumption of the system with variable hydraulic counterweight decreases by 67% and 35% respectively,and the efficiency increases 30%,which means the system saves energy remarkably. Then the problems of the system are discussed,mainly involving efficiency,dynamic response and so on,and the solutions are presented. Finally,the development of the variable counterweight technology is prospected.
Efficiency Analysis and Evaluation of Energy-Saving Pressure-Compensated Circuit for Hybrid Hydraulic Excavator

Tao Wang,Qingfeng Wang

DOI: https://doi.org/10.1016/j.autcon.2014.07.012

IF: 10.3

2014-01-01

Automation in Construction

Abstract:A hydraulic cylinder driven scheme combining a pressure compensator and an energy recovery device together has been proposed to achieve good control operation and energy-saving capability simultaneously. In this paper, its efficiency characteristics are further investigated in order to provide analytical and experimental references to practical applications. Since an excavator owns multiple actuators, a general schematic configuration including hydraulic cylinders with and without energy recovery is developed and analyzed. Based on the analysis of energy losses in every conversion, component selections and possible improvements are discussed, and then the design flowchart and criteria of key parameters are also presented. Finally, experiments under different load and velocity conditions are implemented on a test bench. Energy distributions, recovery efficiencies and component efficiencies are all evaluated.
Simulation Analysis of Potential Energy Recovery System of Hydraulic Hybrid Excavator

Peng-Yu Zhao,Ying-Long Chen,Hua Zhou

DOI: https://doi.org/10.1007/s12541-017-0187-0

IF: 2.0411

2017-01-01

International Journal of Precision Engineering and Manufacturing

Abstract:A new hydraulic hybrid excavator potential energy recovery system is proposed in this paper. The energy recovery system uses threechamber cylinders (TCCs) and accumulators to recover potential energy during work cycle. Within this structure, there is no throttle valve in the primary loop, and the recovered energy is stored in the form of hydraulic energy. Hence, energy loss of throttle valve and energy conversion process are avoided, and energy efficiency is improved. The mathematical model is established to analyze dynamic and energy recovery characteristics. From simulation analysis, the usage of accumulators and TCC influences the dynamic response and stability. The increase of accumulator volume weakens the control performance but heightens the stability. When the cross sectional area of the TCC increases, the control performance of the system are improved. In addition, the maximum power and energy consumption of pumps and engine with different accumulator volumes and different TCC diameters are obtained. Also, the maximum power and energy consumption of each pump and engine in different working conditions are obtained and compared with those without potential energy recovery system. According to the comparison, the potential energy recovery system can reduce the maximum power and energy of engine by 50%.
Energy-saving Methods of Hydraulic Elevator

Gao Hong

2011-01-01

Abstract:This paper analyzes the advantages and disadvantages of hydraulic elevator,and energy-saving methods of hydraulic elevator are described through the increase in machinery weight,pressure tank technology,VVVF control,and then,the energy-saving methods of hydraulic elevator are outlooked.
Research On The Vertical Dynamics Of High-Speed Elevator System - Art. No. 60400v

Xiaoqiang Du,Deqing Mei,Zichen Chen

DOI: https://doi.org/10.1117/12.664175

2005-01-01

Abstract:A more accurate vertical dynamic model with nine degree-of-freedom (DOF) is proposed for better describing the vertical dynamics of high-speed elevator system. By developing a calculation program according to the proposed dynamic model, the dynamics behavior of a 2:1 high-speed roping elevator with rise over 24 meters is numerically calculated in empty load and full load cases at three landing positions: bottom, middle, and top floors. Under the test conditions identical with the simulation but without full load case, modal experiment is applied to an elevator having the same specifications as simulated one. The proposed model is confirmed by comparing numerical and experimental results, and both results indicate that the vertical dynamic characteristics of high-speed elevator are time variant. It is also presented that the low order frequency of high-speed elevator is not sensitive to the variation of hoist rope length but greatly influenced by passenger load.
Research on Inspection Method on Site and Hydraulic Systems for Hydraulic Elevator

Yingjie LIU,Xingjun WU,Bing XU,Weixiong WANG,Yuechao SONG,Xinhua WANG

DOI: https://doi.org/10.3969/j.issn.1001-3881.2014.04.011

2014-01-01

Abstract:As comparing with traction elevator,hydraulic elevator has larger power weight ratio and better reliability,which was suitable in low and middle story buildings.Due to the complication of structure of main control valve in hydraulic elevator,high skill for mechanic to do the installation,adjustment and maintenance work of those system was required which somewhat limited its wide ap-plication.Working principle of the hydraulic system,structure of main valve and developing trend of present some typical hydraulic el-evator were introduced,as well as the regular inspection methods and verification criterions for parameters inspected at fixed period of time as the pressure setting,flow rate characteristic and anti-downward function for the hydraulic main control valve were analyzed.The research helps improving the understanding of hydraulic elevator for technicians,then enlarges the application of hydraulic elevator.
An Energy-Saving Pressure-Compensated Hydraulic System with Electrical Approach

Tao Wang,Qingfeng Wang

DOI: https://doi.org/10.1109/tmech.2013.2250296

2014-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:Mobile hydraulic systems are developed toward better control performance and higher energy efficiency. Pressure compensators, which govern the pressure drops over the control orifices, are widely used in multiactuator systems to improve their operability. However, additional energy is also dissipated in the compensators especially under the overrunning load conditions. This paper presents a novel energy-saving system, where the compensator is designed as a regeneration device consisting of a hydraulic motor and an electric generator. Then, hydraulic energy can be regenerated and pressure compensation function is realized by adapting the electromagnetic torque of the generator to the load as well. The close-loop control of the generator is designed by effective pressure drop estimation. The proposed energy-saving system and controller are implemented on an experimental platform of hybrid excavators which is equipped with an electric energy storage device. The experimental results show both good control performance and significant energy-saving effect.
Research on the vertical dynamics of high-speed elevator system

Xiaoqiang Du,Deqing Mei,Zichen Chen

DOI: https://doi.org/10.1117/12.664175

2005-01-01

Abstract:A more accurate vertical dynamic model with nine degree-of-freedom (DOF) is proposed for better describing the vertical dynamics of high-speed elevator system. By developing a calculation program according to the proposed dynamic model, the dynamics behavior of a 2:1 high-speed roping elevator with rise over 24 meters is numerically calculated in empty load and full load cases at three landing positions: bottom, middle, and top floors. Under the test conditions identical with the simulation but without full load case, modal experiment is applied to an elevator having the same specifications as simulated one. The proposed model is confirmed by comparing numerical and experimental results, and both results indicate that the vertical dynamic characteristics of high-speed elevator are time variant. It is also presented that the low order frequency of high-speed elevator is not sensitive to the variation of hoist rope length but greatly influenced by passenger load.
Computational Simulation and Experimental Research on Speed Control of VVVF Hydraulic Elevator

HY Yang,Y Jian,X Bing

DOI: https://doi.org/10.1016/s0967-0661(03)00139-4

IF: 4.057

2004-01-01

Control Engineering Practice

Abstract:This paper discusses and analyses the speed control of variable voltage variable frequency (VVVF) hydraulic elevator. The computational models of the control system are established. Numerical simulations are carried out with the SIMULINK of MATLAB. PID control law is adopted in experiments because the PID control algorithm is simple in operation, and is characteristic of good computer real-time control. It also possesses good adaptability when the parameters of the controlled object are changed. Experiments are also carried out for the upward and downward running speed of the VVVF hydraulic elevator. Computational simulations coincide with experimental results in general. The results of both simulations and experiments show that serious flutter occurs at the start-up of the VVVF hydraulic elevator, and there is an oscillating phenomenon in the system. During the start-up of the VVVF hydraulic elevator, the system absorbs elastic energy when static friction is changed to dynamic friction. This results in the oscillations after starting.
Influence of Hydraulic Accumulator Performance on the Hydraulic Hybrid Powertrain

Qi Zhang,Feng Wang,Bing Xu,Kim A. Stelson

DOI: https://doi.org/10.1115/fpmc2019-1709

2019-01-01

Abstract:Abstract Owing to its high power density, hydraulic hybrid is considered as an effective approach to reducing the fuel consumption of heavy duty vehicles. A gas-charged hydraulic accumulator serves as the power buffer, storing and releasing hydraulic power through gas. An accurate hydraulic accumulator model is crucial to predict its actual performance. There are two widely used accumulator models: isothermal and adiabatic models. Neither of these models are practical to reflect its real performance in the hydraulic hybrid system. Therefore, the influence of an accumulator model considering thermal hysteresis on a hydraulic hybrid wheel loader has been studied in this paper. The difference of three accumulator models (isothermal, adiabatic and energy balance) has been identified. A dynamic simulation model of the hydraulic hybrid wheel loader has been developed. The fuel consumptions of the hydraulic hybrid wheel loader with three accumulator models has been compared. The influence of heat transfer coefficient of the accumulator housing has also been studied.
Development and Research Overview on Variable Frequency Hydraulic Technology

彭天好,徐兵,杨华勇

DOI: https://doi.org/10.3785/j.issn.1008-973x.2004.02.019

2004-01-01

Abstract:The disadvantages of traditional hydraulic circuits regulating speed with a throttle or variable displacement are first analyzed;then. the advantages and development background of variable frequency hydraulic technology are introduced. This article pointed out that the variable frequency hydraulic system is an overall energy-saving system which can realize power match from the main power supply to execution mechanism. Development and application as well as the research situation of variable frequency hydraulic technology are described in detail. The problems in variable frequency hydraulic technology are discussed, which mainly involve low velocity stability, response time, startup or direction changing smoothness, velocity tracking precision and efficiency. Some kinds of solutions for these problems are presented. In the last part of the article, the developing prospect of variable frequency hydraulic technology is given.
Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits

XU Bing,HUANG Fangping,ZHANG Bin

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.01.027

2006-01-01

Abstract:A new energy-saving hydraulic pumping unit was presented.It uses a special construct hydraulic cylinder and combines variable frequency hydraulic technology with closed oil circuit system and accumulator oil circuit.It features small volume,long stroke,large load,reduced power and low energy consumption,good self-adaption and wide field of application.
Study of an Energy Regeneration System with Accumulator for Hydraulic Impulse Testing Equipment

Zaipeng Man,Fan Ding,Chuan Ding,Shuo Liu

DOI: https://doi.org/10.5545/sv-jme.2014.2138

2015-01-01

Abstract:To guarantee the reliability and performance of hydraulic systems, it is of vital importance to do, hydraulic impulse testing for hydraulic components. However, the testing time is usually so long that the energy consumption is very large. An energy regeneration system with an accumulator is proposed and used for hydraulic impulse testing equipment. Mathematical analysis and simulations show that the hydraulic impulse testing system with an accumulator can reduce energy consumption by 15% compared with that of the system without an accumulator in the cycle. Furthermore, the energy efficiency of the hydraulic impulse testing system is increased from 62.82 to 75.71% by the use of an accumulator. Both simulation results and experimental results show that the control performance of the hydraulic impulse testing equipment with an accumulator is better than that of the equipment without an accumulator, and has a faster response speed and a larger pressure rise rate.
Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control

Dongming Hu,Shoubao Ding,Huaiqiu Zhu,Bing Xu,Huayong Yang

DOI: https://doi.org/10.1109/icmtma.2011.846

2011-01-01

Abstract:The variable-speed controlled hydraulic system is applied in the large inertia hydraulic lift equipments for its high efficiency, such as hydraulic elevators, hydraulic pumping units. And it is a typical time-varying system. In addition to the energy-saving, the velocity performance is another research focus. This paper discussed about the velocity tracking control of the system, in which the compound algorithm of PD & feed forward-feedback control was proposed. The simplified working principle of this kind of pump/inverter-controlled system was first introduced. The mathematic models of the system and the transfer function were established based on the hydraulic elevator system. The frequency-domain analysis of the system showed that it is a type 0 system with the feature of low frequency and poor damping. The steady-state error of velocity is still existed by unity-feedback control without compensation, and the velocity lag occurs with the integral compensation. Simulation and experiments also show this. Then, the compound algorithm of PD & feed forward feedback control was proposed, which satisfied the requirement of the system against steady-state error and nonlinearities. And the experiment results show the stability and validity.

Application of Pressure Accumulator on Hydraulic Elevator

Energy-saving system applying pressure accumulators for VVVF controlled hydraulic elevators

Comparison of Energy-Saving on the Speed Control of the Vvvf Hydraulic Elevator with and Without the Pressure Accumulator

Recovering system of swing braking energy in hydraulic excavator

Pressure Regulation of Accumulator Based on Pressure Difference Control and Its AMESim Simulation

Study on Installed Power of Hydraulic Elevators

New Investigation in Energy Regeneration of Hydraulic Elevators

Energy-saving Technology of Variable Counterweight and Its Energy Consumption Analyses

Efficiency Analysis and Evaluation of Energy-Saving Pressure-Compensated Circuit for Hybrid Hydraulic Excavator

Simulation Analysis of Potential Energy Recovery System of Hydraulic Hybrid Excavator

Energy-saving Methods of Hydraulic Elevator

Research On The Vertical Dynamics Of High-Speed Elevator System - Art. No. 60400v

Research on Inspection Method on Site and Hydraulic Systems for Hydraulic Elevator

An Energy-Saving Pressure-Compensated Hydraulic System with Electrical Approach

Research on the vertical dynamics of high-speed elevator system

Computational Simulation and Experimental Research on Speed Control of VVVF Hydraulic Elevator

Influence of Hydraulic Accumulator Performance on the Hydraulic Hybrid Powertrain

Development and Research Overview on Variable Frequency Hydraulic Technology

Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits

Study of an Energy Regeneration System with Accumulator for Hydraulic Impulse Testing Equipment

Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control