Abstract:A composite titania thin film consisted of quasi-aligned single-crystalline rutile nanorods embedded in sol-gel-derived anatase aggregates was fabricated and its photoelectrochemical behavior was studied in detail. A monolayer of nearly sing I e-crystal line rutile nanorods was first deposited on metallic Ti substrates through a controlled reaction between Ti and hydrogen peroxide. The gaps among the rutile nanorods were then filled with titania nanoparticles through a sol-gel dip-coating approach, which achieved a composite thin film of single-crystalline rutile nanorods embedded in anatase aggregates, after a subsequent thermal treatment at 723 K. The X-ray diffraction measurement revealed that the composite film with thickness of 180 nm contained anatase and rutile in a nearly 50:50 ratio. The UV-visible diffusive reflectance spectra estimated a band gap of 2.99 eV for the rutile monolayer and a slightly increased value of 3.03 eV for the composite film due to the embedding of the anatase nanoparticles. Photocurrent versus potential diagrams, photocurrent transient curves, and open-circuit potential measurement supported the fact that the anatase nanoparticles possessed better inherent photoelectrochemical properties than rutile. However, electrochemical impedance spectra characterization, together with photocurrent transient curves and open-circuit potential measurement, suggests that the single-crystalline rutile nanorods exhibited a higher electron-transfer rate. The combination of the two components in such an appropriate way enhanced significantly the charge separation effect arising from the anatase/rutile couple, which hence combined efficiently the "mixed crystal effect" and the "mixed morphological effect". A steady-state photocurrent more than double the simple sum of those generated by the two components alone was detected for the current composite film, which can be attributed to the single-crystalline rutile nanorods that provide channels for rapid electron transfer to the conductive Ti substrates under an applied bias potential. As a result, this study concludes that the present nanostructure magnified significantly the well-established mixed crystal effect, that is, an enhanced charge separation arising from a mixture of anatase and rutile.

Effect of Composite Modes on Photoelectrochemical Properties of MWCNTs/TiO<SUB>2</SUB> Nanocomposite Films

Photoelectrochemical properties of Mutil-Walled Carbon Nanotube/TiO2 nanocomposite films

Photo-Induced Charge Generation of TiO<sub>2</sub> Nanotube Modified with Polymer Containing C<sub>60</sub> under Irradiation of Visible Light and its Applications

Highly-enhanced Performance of TiO 2 Nanotubes Attached with CdS quantum Dots

Synthesis of g-C3N4/Bi2O3/TiO2 composite nanotubes: enhanced activity under visible light irradiation and improved photoelectrochemical activity

Mechanism, Photocatalytic And Bactericidal Effects For The Nanocarbon/Tio(2) Composites

Photonic effects of Mn-CNT/TiO 2 composites modified by different oxide agents

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Photoelectrochemical properties of TiO2 coated on carbon nanofibers with different microstructure film electrodes

Photoelectrochemical Performance of Nanostructured Tio2/Ctcmt Composite Film Electrode

Performance Of Dye-Sensitized Solar Cells Based On Mwcnt/Tio2-Xnx Nanocomposite Electrodes

Enhancement of Photocatalytic Activity of Mesoporous TiO2 by Using Carbon Nanotubes

Microstructures and Photonic Effects of Titania Dispersed Inside/Outside Carbon Nanotube Composites Derived from Different Titanium Alkoxide Precursors

Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates

Photoelectrochemical Activity of TiO 2 /MWCNT Thin-Film Electrodes with Different Film Structures Prepared by Combining Electrophoretic Deposition and Sol–Gel Method

Carbon nanowires promoted Cu2O/TiO2 nanocomposite for enhanced photoelectrochemical performance

Preparation and Photocatalytic Effect of MWCNT/TiO₂ Composites

Preparation And Photocatalytic Effect Of Mwcnt/Tio2 Composites

Synthesis and Characterization of CNT/TiO2 Composites Thermally Derived from MWCNT and Titanium(IV) N-Butoxide

Photocatalytic Properties and the Role of Carbon Nanotubes in Tio2/Carbon Nanotube Composites

Synthesis and Characterization of Cnt / Tio2 Photoelectrocatalytic Electrodes for Methlene Blue Degradation

Effect of Composite Modes on Photoelectrochemical Properties of MWCNTs/TiO&lt;SUB&gt;2&lt;/SUB&gt; Nanocomposite Films