Abstract:Organic light-emitting diodes (OLEDs) based on conjugated polymers have been attracting much attention because of their cheap and easy fabrication with solution-based processing techniques. Full color displays based on organic materials have very attractive prospects and one of the most exciting ones is the use of ink-jet printing to allow direct patterning of conjugated polymer LED pixels. However, achieving pure-red emission has proved relatively challenging. In this work the optical properties of varying 5,10,15,20-tetra-p-tolyl-21H, 23H-porphine (TTP) doped poly [2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) were studied. The UV-Vis absorption of Q-band of TTP overlapped the photoluminescent spectra of MEH-PPV. This is a priority for occurrence of Frster-type energy transfer. The photoluminescent spectra of varying TTP doped MEH-PPV showed that the emission of TTP increased as the increasing of the doping level at the excitation wavelength of 500 nm, at which TTP didn’t absorb energy, indicating the existence of Frster energy transfer from MEH-PPV to TTP. However, the continuous addition of TTP resulted in the enhanced emission of MEH-PPV at the doping level above 4 percent, due to the self-quenching caused by crystallization of TTP. The devices with varying TTP doped MEH-PPV as light-emitting layers were also fabricated and the structure of the devices was ITO/PEDOT∶PSS/TTP doped MEH-PPV/Al[PEDOT∶PSS=poly(2,3-dihydrothieno[3,4-b]-1,4-dioxin)/ poly(styrenesulfonate)]. The layers of PEDOT/PSS (20 nm) and TTP doped polymers (80 nm) were spun onto ITO substrates and aluminum cathode (100 nm) was deposited under vacuum pressure of about 1×10-3 Pa. The electroluminescent properties of the devices were investigated and TTP dominated red emission was observed. The electroluminescent emission from TTP increased as the increasing of doping level in light-emitting layer. On the other hand, the emission of MEH-PPV reduced gra-dually until the doping level of 8 percent. Then it began to grow. The results of photoluminescence and electroluminescence expressed that the two emission processes followed different mechanisms. TTP could be a center for capturing exitons in electroluminescence and the emission of TTP involved the capture of electrons and holes by itself apart from Frster-type energy transfer from MEH-PPV. The researches on TTP doped conjugated polymers will be helpful to enlarge the application of dye, porphyrin, in OLEDs. Moreover, the researches on the mechanisms of photoluminescence and electroluminescence for the blended systems will provide scientific basis for color tuning of composite materials.

Effect of SPFGraphene Dopant in MEH–PPV Organic Light-Emitting Devices

Phosphomolybdic Acid-Modified Monolayer Graphene Anode for Efficient Organic and Perovskite Light-Emitting Diodes

Green Oled Based On Doped Tetra-Methylest& Of Perylene-3,4,9,10-Tetracarboxylicacid Emitter

Optimization of the carrier recombination and transmission properties in perovskite LEDs by doping poly (4-vinylpyridine) and graphene quantum dots made of chitin

Mobility Increase in Poly [2-Methoxy-5-(2′-ethylhexyloxy)-1, 4-Phenylenevinylene] Blended with Graphene

Gate tunable surface plasmon resonance enhanced graphene/Ag nanoparticles-polymethyl methacrylate/graphene/p-GaN heterostructure light-emitting diodes.

Improved performance of polymer light-emitting diodes using graphene oxide doped with silver nanoparticles as the hole-transport layer

Multilayered Graphene Used As Anode of Organic Light Emitting Devices

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

The photovoltaic behaviors of PPV- and PPE-type conjugated polymers featured with diketopyrrolopyrrole (DPP) units

Photo- and Electro-Luminescent Properties of 5,10,15,20-Tetra-p-tolyl-21h,23h-porphine Doped Poly[2-Methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] Films

Luminescent Properties of Porphyrin Doped Poly [2-Methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene]

Effect of the π-stacking interaction mechanism inside a composite-based MEHPPV-P3HT mixed with different acceptor materials

Optimized optical and morphological properties of thin MEH-PPV: PC71BM films deposited on glass substrates for photovoltaic applications

Effects of MEH-PPV Molecular Ordering in the Emitting Layer on the Luminescence Efficiency of Organic Light-Emitting Diodes

Graphene quantum dots as the hole transport layer material for high-performance organic solar cells

Improved properties of dye-sensitized solar cells by incorporation of graphene into the photoelectrodes

Enhance the Pyroelectricity of Polyvinylidene Fluoride by Graphene-Oxide Doping

Solution-processed, semitransparent organic photovoltaics integrated with solution-doped graphene electrodes

Efficient CH 3 NH 3 PbI 3 Perovskite Solar Cells Based on Graphdiyne (GD)-Modified P3HT Hole-Transporting Material

Effect of polyethylene glycol in graphene quantum dots for dye-sensitized solar cell