Abstract:Organic light-emitting diodes (OLEDs) based on conjugated polymers have been attracting much attention because of their cheap and easy fabrication with solution-based processing techniques. Full color displays based on organic materials have very attractive prospects and one of the most exciting ones is the use of ink-jet printing to allow direct patterning of conjugated polymer LED pixels. However, achieving pure-red emission has proved relatively challenging. In this work the optical properties of varying 5,10,15,20-tetra-p-tolyl-21H, 23H-porphine (TTP) doped poly [2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) were studied. The UV-Vis absorption of Q-band of TTP overlapped the photoluminescent spectra of MEH-PPV. This is a priority for occurrence of Frster-type energy transfer. The photoluminescent spectra of varying TTP doped MEH-PPV showed that the emission of TTP increased as the increasing of the doping level at the excitation wavelength of 500 nm, at which TTP didn’t absorb energy, indicating the existence of Frster energy transfer from MEH-PPV to TTP. However, the continuous addition of TTP resulted in the enhanced emission of MEH-PPV at the doping level above 4 percent, due to the self-quenching caused by crystallization of TTP. The devices with varying TTP doped MEH-PPV as light-emitting layers were also fabricated and the structure of the devices was ITO/PEDOT∶PSS/TTP doped MEH-PPV/Al[PEDOT∶PSS=poly(2,3-dihydrothieno[3,4-b]-1,4-dioxin)/ poly(styrenesulfonate)]. The layers of PEDOT/PSS (20 nm) and TTP doped polymers (80 nm) were spun onto ITO substrates and aluminum cathode (100 nm) was deposited under vacuum pressure of about 1×10-3 Pa. The electroluminescent properties of the devices were investigated and TTP dominated red emission was observed. The electroluminescent emission from TTP increased as the increasing of doping level in light-emitting layer. On the other hand, the emission of MEH-PPV reduced gra-dually until the doping level of 8 percent. Then it began to grow. The results of photoluminescence and electroluminescence expressed that the two emission processes followed different mechanisms. TTP could be a center for capturing exitons in electroluminescence and the emission of TTP involved the capture of electrons and holes by itself apart from Frster-type energy transfer from MEH-PPV. The researches on TTP doped conjugated polymers will be helpful to enlarge the application of dye, porphyrin, in OLEDs. Moreover, the researches on the mechanisms of photoluminescence and electroluminescence for the blended systems will provide scientific basis for color tuning of composite materials.

Green Oled Based On Doped Tetra-Methylest& Of Perylene-3,4,9,10-Tetracarboxylicacid Emitter

Conjugated Polyelectrolytes as Efficient Hole Transport Layers in Perovskite Light-Emitting Diodes.

Electric Field Evolution of Charge and Energy Transfer in Molecule-Doped Polymer Light-Emitting Diodes

Luminescent Properties of Porphyrin Doped Poly [2-Methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene]

Organic electroluminescence from photovoltaic thin film

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Excitation mechanism in polymer layers doped with tetra-methylester of perylene tetracarboxylicacid: influences of doping concentration and external bias

A Wide-Bandgap, High-Mobility Electron-Transporting Material Containing a 9,9′-Spirobithioxanthene Skeleton

Photo- and Electro-Luminescent Properties of 5,10,15,20-Tetra-p-tolyl-21h,23h-porphine Doped Poly[2-Methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] Films

Employing ∼100% Excitons in OLEDs by Utilizing a Fluorescent Molecule with Hybridized Local and Charge‐Transfer Excited State

Achieving a Significantly Increased Efficiency in Nondoped Pure Blue Fluorescent OLED: A Quasi‐Equivalent Hybridized Excited State

Electroluminescence Enhancement by Blending PVK with an Alternating Copolymer Containing Triphenylamine and Phenylene Units

Photoluminescence And Electroluminescence Properties Of 2,5-Bis [2,2 '-Bis(5-Phenyl)-1,3,4-Oxadiazole] Thiophene (T-Oxd) And T-Oxd/Poly(9-Vinyl Carbazole) Blends

Photoluminescence and Electroluminescence Properties of 2, 5-Bis[2,2′-bis （5-Phenyl ）- 1, 3,4-Oxadiazole] Thiophene （T-OXD） and T-OXD／Poly（9-vinylcarbazole） Blends

Improving Electron Mobility of Tetraphenylethene-Based AlEgens to Fabricate Nondoped Organic Light-Emitting Diodes with Remarkably High Luminance and Efficiency

Substituted tetrapyrazolylporphyrins: application in organic light-emitting diodes

Highly thermal stable electron-transporting materials using triptycene derivatives for OLEDs

Solution‐Processed Thermally Activated Delayed Fluorescent OLED with High EQE as 31% Using High Triplet Energy Crosslinkable Hole Transport Materials

Long‐Lived and Highly Efficient TADF‐PhOLED with “(a)n–d–(a)n” Structured Terpyridine Electron‐Transporting Material

1,3,5-Triazine derivatives as new electron transport–type host materials for highly efficient green phosphorescent OLEDs

An electron transporting blue emitter for OLED