Abstract:Different amounts of Si element were introduced into binary Co50Cu50 alloy to investigate the thermodynamic properties and phase transitions of ternary Co50-x/2Cu(50-x)/2Si(x) (x = 10, 20, 30, 40 and 50 at%) alloys. Their liquidus and solidus temperatures versus Si content were determined by the differential scanning calorimetry (DSC) method. It was found that the addition of Si element depressed both the liquidus and solidus temperatures as compared with binary Co50Cu50 alloy. In particular, the additions of 10 and 20 at% Si remarkably reduced the critical undercooling for liquid demixing to only 3 and 1 K, whereas no liquid phase separation took place in other Co50-x/2Cu(50-x)/2Si(x) alloys. The relationship between the enthalpy of fusion and alloy composition was also established by a polynomial function on the basis of the measured data. The solidification microstructures of the DSC samples were investigated corresponding to the calorimetric signals, based on which the solidification pathway for each Co(50-x/)2Cu(50-x)/2Si(x) alloy was elucidated. The Si element displays stronger affinity with the Co element than the Cu element. As Si content rises, the pseudobinary eutectic (Co + Co2Si), (Co2Si + CoSi), (CoSi + CoSi2) and (Cu3Si + Si) structures were successively formed, and there were no ternary intermetallic compounds in these alloys. The thermal diffusivity of solid ternary Co50-x/2Cu(50-x)/2Si(x) alloys was determined by a laser flash method in a wide temperature range from 300 to 1180 K, which showed a decreasing tendency with the increase of Si content.

Experimental Investigation and Thermodynamic Modeling of the Al–Cu–Si System

Experimental Investigation and CALPHAD Modeling of the Cu–Cr–Si Ternary System

Experimental investigation and thermodynamic modeling of the ternary Al–Cu–Fe system

Experimental Investigation and Thermodynamic Modeling of Cu–Nb–Si System

Experimental Investigation and Thermodynamic Modeling of the Cu–Ag–Si Ternary System

Experimental Investigation and Thermodynamic Modeling of the Cu–Si–Zn System with the Refined Description for the Cu–Zn System

Thermodynamic Properties and Phase Transitions of Ternary Co–Cu–Si Alloys with Equiatomic Co/Cu Ratio

Experimental Investigation of Phase Equilibria in the Cu–Ni–Si Ternary System

Experimental Investigation and Thermodynamic Reassessment of the Cu-Fe-Si System

Experimental Investigation and Thermodynamic Calculation of the Cu–Cr–Ti Ternary System

Phase Diagram Determination and Thermodynamic Modeling of the Cu-Mg-Si System

Experimental investigation of phase equilibria in the Al-Ag-Si system

Experimental Investigation, Thermodynamic Modeling and Solidified Microstructure of the Cu–Ti–Nb Ternary System

Experimental Investigation and Thermodynamic Calculation in the Al-Be-Si Ternary System

Phase Equilibria and Multi-Element Interaction Study in the Metal-Rich Side of the Nb–Ti–Si–Al Quaternary System

Experimental Study and Thermodynamic Assessment of the Cu–Fe–Ti System

Experimental Investigation and Thermodynamic Modeling of the Cr–Zr–Si System

Experimental and Thermodynamic Investigation of Al-Cu-Nd Ternary System

Experimental Investigation of Phase Equilibria in the Ni–Co–Si Ternary System

Experimental Investigation and Thermodynamic Calculation of the Phase Equilibria in the Cu-Nb-Zr Ternary System

Experimental Investigation and Thermodynamic Modeling of the Cr-Ni-Si System