Abstract:This study investigated the bond-slip mechanism of eccentrically pulled out rebar under different corrosion level. The variation patterns of the bonding performance between two types of steel rebars (i.e., plain round rebar and ribbed rebar) and concrete with different stirrup ratios were obtained with respect to the amount of steel rebar corrosion. The differences in bonding performance between plain round rebars and ribbed rebars with concrete were compared, and the bond-slip mechanisms of plain round rebars and ribbed rebars with concrete were elucidated. The influence of longitudinal bar type and stirrup ratio on the ultimate bond strength and bond-slip constitutive curve was analyzed. It has been determined that in the case of uncorroded specimens featuring ribbed bars, the ultimate bond strength exhibits an approximately linear increase in relation to the stirrup ratio. Conversely, the stirrup ratio does not have a significant impact on the ultimate bond strength of uncorroded specimens with plain round bars. Transverse reinforcement plays a crucial role in mitigating the effects of cracked concrete by delaying the reduction in bond stress caused by the corrosion rate of longitudinal rein -forcement. This phenomenon becomes increasingly prominent when higher stirrup ratios are utilized in the case of plain round reinforcement. Transverse reinforcement serves to suppress the occurrence of the brittle failure stage that follows the peak bond stress in specimens exhibiting a low corrosion rate. The magnitude of this effect becomes more pronounced as higher transverse reinforcement ratios are employed.

Experimental Study on the Factors Influencing the Anchorage Performance of Planting Reinforcing Bar

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens

BOND STRENGTH BETWEEN CONCRETE AND DEFORMED BARS UNDER COMBINED EFFECTS OF STIRRUPS AND CONCRETE COVER

Experimental study on seismic behavior of precast concrete column with longitudinal reinforcement grouting-anchoring connections

EFFECT OF CONCRETE STRENGTH ON ANCHORAGE PERFORMANCE OF CONNECTING STEEL BAR OF PREFABRICATED SUPERIMPOSED SLAB

The influence of longitudinal rebar type and stirrup ratio on the bond performance of reinforced concrete with corrosion

EXPERIMENTAL STUDY ON HOOP BOND BETWEEN CORROSION BAR AND CONCRETE

Experimental Study on the Bond Behavior of Reinforcing Bars Embedded in Concrete Subjected to Lateral Pressure

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Test study on bond behavior of corroded steel bars and concrete

An Enhanced Numerical Calculation Method to Study the Anchorage Performance of Rebars

Experimental study on the bond behavior of deformed bars embedded in concrete subjected to lateral tension

Bond–Slip Law Between Steel Bar and Different Cement-Based Materials Considering Anchorage Position Function

Analytical Approach to Modeling the Effect of Transverse Reinforcements on the Bond Strength of Deformed Bars

Bond behavior and anchorage length of 18-mm-diameter steel strands embedded in ultra-high-performance concrete: an experimental and analytical study

Experimental and Analytical Study on Bond Strength of Normal Uncoated and Epoxy-Coated Reinforcing Bars

Anchorage performance of straight rebars in UHPC with strain-hardening property

Experimental and analytical studies of the bond between ribbed CFRP bar and aluminum alloy additional ribs anchorage

Theoretical analysis on bond characteristics between steel bars and ultra-high performance concrete

Effect of Circumferentially Nonuniform Lateral Tension on Bond Behavior Between Plain Round Bars and Concrete: Analytical Study