Abstract:The design simulation and fabrication results of a bandpass filter based on micro-electro-mechanical system (MEMS) switches are presented in this paper. The MEMS filter element consists of a MEMS capacitance switch and two resonant rings that are fixed onto coplanar waveguide lines through anchor points. The micromachine characteristics of the filter could be optimized to change the center frequency from 8.5 to 12 GHz by improving the geometrical parameters; other electrical parameters of the filter, such as stopband rejection, insertion loss, and return loss at each center frequency, were simulated and calculated. In order to evaluate the MEMS filter design methodology, a filter working at 10.5 GHz fabricated with an aluminum top electrode was used, and it displayed a low insertion loss of 1.12 dB and a high stopband rejection of 28.3 dB. Compared with the simulation results, these proposed filter showed better electrical performance. Our results demonstrated that the filter with the integrated RF MEMS switch not only provides the benefit of reduced size compared with a traditional filter, but also improves stopband rejection, insertion loss, and return loss.

Design and Fabrication of Hairpin Bandpass Filter with High Reliability

Design of X-band Hi-Lo Microstrip Low-pass Filters

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Design Of Ku-Band Sir Interdigital Bandpass Filter Using Silicon-Based Micromachining Technology

The design and fabrication of RF band pass filter by LTCC technology

Design of Parallel Coupled Band-pass Filter Based on ADS

Design and fabrication of 2.45G miniaturized band pass filter by LTCC technology

Simulation design of a novel micro-strip absorption band-pass filter

Fabrication Of Three-Pole Hgba2cacu2o6+(Delta) Hairpin Filter And Characterization Of Its Third Order Intermodulation

Design and Performance of an HTS Wideband Microstrip Bandpass Filter at X‐band

Design and performance of a compact forward-coupled HTS microstrip filter for a GSM system

Fabrication of Three-Pole HgBa2CaCu2O6+δ Hairpin Filter and Characterization of Its Third Order Intermodulation

A Microstrip Lowpass Filter With Miniaturized Size and Broad Stopband

Miniaturised microstrip bandpass filter using octagonal hairpin resonators with side-coupled technique

Accurate Design of High Tc Superconducting Microstrip Filter at UHF Band for Radio Astronomy Front End

Fabrication of Three-Pole ${\rm HgBa}_{2}{\rm CaCu}_{2}{\rm O}_{6+\delta}$ Hairpin Filter and Characterization of Its Third Order Intermodulation

Accurate Design of a Compact Superconducting Microstrip Filter

WR‐1.5 (500–750 GHz) Waveguide Bandpass Filter Fabricated Using High Precision Computer Numerically Controlled Machining

Design and Fabrication of a MEMS Bandpass Filter with Different Center Frequency of 8.5-12 GHz.

Design of 140ghz Narrow Band-pass Planar Filters Based on Open Loop Resonators

Design of Wide-Band Bandpass Filter Using Composite Right/Left-Handed Transmission Line Structure