Abstract:Abstract Multilayer adhesive bonded structures/materials (MABS) are widely used as structural components, especially in the field of aerospace. However, for MABS workpieces, the facts that the weak echo of the deep interfacial debonding defects (DB) caused by the large acoustic attenuation coefficient of each layer and this echo, which generally aliases with the excitation wave and the backwall echo of the surface layer, pose a great challenge for the conventional longitudinal wave ultrasonic nondestructive testing methods. In this work, an ultrasonic resonance evaluation method for deep interfacial DBs of MABS is proposed based on the ultrasonic resonance theory and the aliasing effect of ultrasonic waves in MABS. Theoretical and simulation analysis show that the optimal inspection frequency for II-interfacial DBs is 500 kHz when the shell thickness is 1.5 mm and the ethylene propylene diene monomer (EPDM) thickness is 1.5 mm, and the optimal inspection frequency is 250 kHz when the shell thickness is 1.5 or 2.0 mm and the EPDM thickness is 2.0 mm. Verification experiments show that the presence of a DB in the II-interface causes a resonance effect, and in the same inspection configuration, the larger the defect size, the more pronounced this effect is. This resonance effect manifests itself as an increase in the amplitude and an increase in the vibration time of the A-scan signal as well as a pronounced change in the frequency of the received ultrasonic wave. In addition, the increase in the excitation voltage further highlights the ultrasonic resonance effect. Four imaging methods – the integrations of the signal and the signal envelope curve, the maximum amplitude of the fast Fourier transform (FFT) of the signal, and the signal energy – were used for C-scan imaging of ultrasonic resonance evaluation of MABS’s deep interfacial DBs and all these methods can clearly show the sizes and locations of the artificial defects and internal natural defect. The normalized C-scan imaging method proposed in this study can further highlight the weak changes in the signals in the C-scan image. The research results of this study have laid a solid theoretical and practical foundation for the ultrasonic resonance evaluation of MABS.

Detection and Location of Debond Defect in Metal-nonmetal Multi-layered Bonded Structure

Extraction of Defect Features for Metal Matrix Composite Structure Ultrasonic Echo Based on Wavelet-packet Transform

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Detecting features of defect metal based on laser ultrasonic technique

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Detection of Multi-Layered Bond Delamination Defects Based on Full Waveform Inversion

Non-Destructive Evaluation of the Quality of Adhesive Joints Using Ultrasound, X-ray, and Feature-Based Data Fusion

Ultrasonic resonance evaluation method for deep interfacial debonding defects of multilayer adhesive bonded materials

Debonding Detection of Thin-Walled Adhesive Structure by Electromagnetic Acoustic Resonance Technology

Nonlinear Ultrasonic C-Scan Imaging for Contact-Type Defects in Diffusion-Bonded Joints—A Case Study

Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds

Evaluation of metallic bonded plates with nonlinear ultrasound and comparison with destructive testing

Nondestructive evaluation with fully non-contact air-coupled transducer-scanning laser Doppler vibrometer Lamb wave system

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part II: Scanning Doppler Laser-Based MASW and Microphone Combination-Based Impact-Acoustic Vibration

Nondestructive Evaluation of Bond Quality of Adhesively Joined Carbon Fiber/nylon 6 Composites

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Delamination Detection in Composite Plates Using Linear and Nonlinear Ultrasonic Guided Waves

Ultrasonic Signal Research of Multi-Layered Metal Structure Based on Morlet-P Wavelet

The Ultrasonic Feature Imaging Testing of special structure

Research on Ultrasonic Nondestructive Testing Algorithm for Metal Materials

Non-contact detection of delamination in stainless steel/carbon steel composites with laser ultrasonic