Abstract:The loads, stress and strain state of the ship structures are quite complicated under the condition of collision and grounding. The failure criteria which are commonly used in numerical simulations of ship collision have limitations in evaluating the failure characteristics of hull steel under complicated stress. Based on the shell theory, complex stress in plate is simplified as plane stress. In experiments, six different shapes of specimens were designed to study the failure characteristics of high-strength hull steel under biaxial stress. The specimens were pressed with a hemispherical indenter until destruction under quasi-static loading. The displacement of specimens’ midpoint and loading force were recorded. The simulation models which considering the mesh size sensitivity and the failure criteria combined with the damage evolution model have been studied. A new reasonable formula is proposed to calculate the average failure strain of different mesh size. With the application of the average failure strain, a bilinear damage evolution model for high strength hull steel in biaxial tension stress is established. Based on a plastic instable criterion, a modified BWH (m-BWH) criterion is proposed. The comparison of Constant strain (CS) criterion combined with linear damage evolution model, the BWH and m-BWH failure criteria which are combined with the bilinear damage evolution model has been performed in the simulations by Abaqus user material subroutine (VUMAT). Although the BWH criterion is more precise than the constant strain criterion in comparison with the experiment results, its errors will increase with rising of strain ratio. The m-BWH criterion improves the accuracy of the simulations when the strain ratio is high.

Longitudinal Ultimate Strength of Composite Ship Hull Considering Delamination Damage Mode

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Ultimate Longitudinal Strength of Composite Ship Hulls

Ultimate strength analysis of composite laminated ship panels

Ultimate Strength Analysis of Ship Hulls of Continuous Basalt Fiber Composite Materials

Study on Delamination Problems of Composite Hull Structures under Slamming Loads

The Effects of Stochastic Characteristics of Materials on the Reliability of A Composite Ship Hull

Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack

Simulation Analysis of Delamination Damage for the Thick-Walled Composite-Overwrapped Pressure Vessels

Analysis of the Damage Parameters Impact of Reinforced Composite Materials Initial Delamination

Progressive Damage Behavior of Composite L‐stiffened Structures with Initial Delamination Defects under Uniaxial Compression: Experimental and Numerical Investigations

Residual Ultimate Strength of Hull Structures with Crack and Corrosion Damage

Ultimate Strength Model Experiment Regarding A Container Ship'S Hull Structures

Ultimate strength analysis of two types of strength deck under large deformation damage condition

Simulation and analysis of delamination damage propagation in CFRP structures

Experimental and Numerical Analyses of Stiffened Composite Panels with Delamination under a Compressive Load

On the Distribution of Delamination in Composite Structures and Compressive Strength Prediction for Laminates with Embedded Delaminations

Continuum damage modeling and progressive failure analysis of a Type III composite vessel by considering the effect of autofrettage

Experimental and Numerical Investigation of Material Failure Criterion with High-Strength Hull Steel under Biaxial Stress

An Enhanced Progressive Damage Model for Laminated Fiber-Reinforced Composites Using the 3D Hashin Failure Criterion: A Multi-Level Analysis and Validation

Three-dimensional numerical modeling of composite panels subjected to underwater blast