Abstract:Piezoelectric composites, which consist of a piezoelectric material and a polymer, have been extensively studied for the applications of underwater sonar sensors and medical diagnostic ultrasonic transducers. Acoustic sensors utilizing piezoelectric composites can have a high sensitivity and wide bandwidth because of their high piezoelectric coefficient and low acoustic impedance compared to single-phase piezoelectric materials. In this study, a thickness-mode driving hydrophone utilizing a 2-2 piezoelectric single crystal composite was examined. From the theoretical and numerical analysis, material properties that determine the bandwidth and sensitivity of the thickness-mode piezoelectric plate were derived, and the voltage sensitivity of piezoelectric plates with various configurations was compared. It was shown that the 2-2 composite with [011] poled single crystals and epoxy polymers can provide high sensitivity and wide bandwidth when used for hydrophones with a thickness resonance mode. The hydrophone element was designed and fabricated to have a thickness mode at a frequency around 220 kHz by attaching a composite plate of quarter-wavelength thickness to a hard baffle. The fabricated hydrophone demonstrated an open circuit voltage sensitivity of more than -180 dB re 1 V/μPa at the resonance frequency and a -3 dB bandwidth of more than 55 kHz. The theoretical and experimental studies show that the 2-2 single crystal composite can have a high sensitivity and wide bandwidth compared to other configurations of piezoelectric elements when they are used for thickness-mode hydrophones.

Piezoelectric Composite Standard Reference Hydrophone for the Frequency Rang 100～500Khz

Piezoelectric composite hydrophone array

High-Frequency Plane Piezoelectric Transducer for High-Sensitivity Acoustics

Development of a high sensitivity hydrophone at a spectrum range from 0.1 Hz to 100 kHz

High-frequency inlaid cylindrical piezoelectric transducer for high-sensitivity acoustics

Unclosed Hexagonal Piezoelectric MEMS Hydrophone Based on Rigid-Flexible Composite Membrane

1－ 3 piezocomposites tubular hydrophone

Theoretical and Experimental Studies on Sensitivity and Bandwidth of Thickness-Mode Driving Hydrophone Utilizing A 2-2 Piezoelectric Single Crystal Composite

A ScAlN Piezoelectric High-Frequency Acoustic Pressure-Gradient MEMS Vector Hydrophone With Large Bandwidth

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

A Piezoelectric AlN MEMS Hydrophone with High Sensitivity and Low Noise Density

A Novel MEMS Based Piezoresistive Vector Hydrophone for Low Frequency Detection

New 1-3 type piezoelectric composite material for kilohertz frequency range transducers

Low-Cost, High-Sensitivity Hydrophone Based on Resonant Air Cavity

Design And Measurement Of A Si-Based Vector Hydrophone Based On Piezoresistive Effects

A High-Performance Fiber-Optic Hydrophone for Large Scale Arrays

Hydrostatic piezoelectric property of piezoelectric composite Pt-P (VDF/TeFE)

Large-Area Piezoelectric Single Crystal Composites Via 3-D-printing-assisted Dice-and-Insert Technology for Hydrophone Applications.

High-Sensitivity Cuboid Interferometric Fiber-Optic Hydrophone Based on Planar Rectangular Film Sensing

Research on a high-frequency unfilled layered symmetrical piezoelectric material with a high effective electromechanical coupling coefficient

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer