Abstract:A design study of a horizontal neutron reflectometer adapted to the general baseline of the long pulse European Spallation Source (ESS) is presented. The instrument layout comprises solutions for the neutron guide, high-resolution pulse shaping and beam bending onto a sample surface being so far unique in the field of reflectometry. The length of this instrument is roughly 55 m, enabling $\delta \lambda / \lambda$ resolutions from 0.5% to 10%. The incident beam is focussed in horizontal plane to boost measurements of sample sizes of 1*1 cm{^2} and smaller with potential beam deflection in both downward and upward direction. The range of neutron wavelengths untilized by the instrument is 2 to 7.1 (12.2, ...) Å, if every (second, ...) neutron source ulse is used. Angles of incidence can be set between 0° and 9° with a total accessible q-range from 4*10^{-3} Å^{-1} up to 1 Å^{-1}. The instrument operates both in {\theta}/{\theta} (free liquid surfaces) and {\theta}/2{\theta} (solid/liquid, air/solid interfaces) geometry. The experimental setup will in particular enable direct studies on ultrathin films (d ~ 10 Å) and buried monolayers to multilayered structures of up to 3000 Å total thickness. The horizontal reflectometer will further foster investigations of hierarchical systems from nanometer to micrometer length scale, as well as their kinetics and dynamical properties, in particular under load (shear, pressure, external fields). Polarization and polarization analysis as well as the GISANS option are designed as potential modules to be implemented separately in the generic instrument layout. The instrument is highly flexible and offers a variety of different measurement modes. With respect to its mechanical components the instrument is exclusively based on current technology. Risks of failure for the chosen setup are minimum.

Design and Simulation of Time-of-flight Neutron Reflectometer

Design and performance evaluation of a compact thermal and fast neutron spectrometer

Conceptual Design and Simulation of Neutron Standard Test Beam at CAEP

Optimized Combination of Shutters and Focus Neutron Guides for Neutron Reflectometers

Design and Simulation of a Space-Adjustable Chopper

Analysis and Optimization of Spatial Resolution for a Neutron Sensitive Microchannel Plate Detector

High performance neutron passive imaging with a self-collimating neutron camera

Design of a horizontal neutron reflectometer for the European Spallation Source

Study of a Position-Sensitive Scintillator Neutron Detector Prototype Based on 6lif/zns Scintillator and Silicon Photomultiplier Arrays Readout

Simulation of the Neutron Transport Process and Establishment of the Neutron Monitoring Model Based on the Geant4

Development of a high-resolution and omnidirectional field-of-view neutron imager

Design of a Compact Neutron Spectrometer Using the CLYC Scintillator

A Simulation Study of Influencing Factor of Spatial Resolution in Fast Neutron Imaging

Simulation of Physical Parameters for a Photoneutron Source

Simulation Study Of Detection Efficiency And Precision On A Novel Coincidence Neutron Spectrometer Technique

Development of a dual-mode energy-resolved neutron imaging detector: High spatial resolution and large field of view

A novel energy resolved neutron imaging detector based on TPX3Cam for the CSNS

Calculations on Ellipsoidal and Conical Focusing Mirrors for Small Angle Neutron Scattering

Feasibility study of a compact Neutron Resonance Transmission Analysis instrument

Design and Initial Tests of a Fast Neutron Radiography Detector Prototype with Silicon Photomultiplier Readouts

Numerical Study of Point Spread Function of a Fast Neutron Radiography System Based on Scintillating-Fiber Array