Abstract:Large inconsistencies still exist in nuclear data libraries regarding the kinetic parameters of delayed neutron (DN) precursors. As an example, there is a 17% gap between ENDF-B/VIII.0 and JEFF-3.3 on the average lifetime T 1/2 of DN precursors from thermal fission of 235 U. This parameter is of major importance for reactivity predictions of nuclear reactors in nominal or accidental configurations. In this context, CEA is actively participating to the ALDEN project (Average number and Lifetime of DElayed Neutrons) which aims at providing the nuclear data community with new data sets of DN from thermal and fast neutron induced fission of various actinides. A dedicated experimental setup was designed and optimized for that purpose and is presented in this paper. It consists of a "long counter" detector containing 16 proportional counters filled with 3 He, embedded in a high density polyethylene matrix. The detector surrounds a fissile target prepared in the form of a miniature fission chamber, containing a few hundreds of micro-grams of fissile material. This set-up is connected to fast and efficient neutron shutters that can produce step-irradiations of variable durations. The equations driving the DN counting following step-irradiations of the fissile target are established and discussed in the perspective of DN yield or group parameter measurement. A comprehensive analysis of the different steps of data reduction is detailed: dead time characterization, Region of Interest (ROI) determination, absolute and relative efficiency calibration, fission rate estimation, irradiation time and background determination, DN decay curve production and physical parameter fitting. Following a prototype experiment performed in 2018 at the PF1b cold neutron beam line of Institute Laue Langevin (ILL, Grenoble, France), we discuss here the analysis of two campaigns occurring in 2019 and 2021 in which significant improvements were achieved in terms of background minimization, counting statistics and fission rate determination. The achievements of this work are the measurement of the delayed neutron emission per fission for the thermal neutron induced fission of 235 U, estimated at (1.625 ± 0.010) % and the group parameters leading to an estimated lifetime of = (8.87 ± 0.10) s. Those results are consistent with the values recommended by the IAEA/CRP work and they come with reduced uncertainties compared with previously published results.

Towards generalized data reduction on a chopper-based time-of-flight neutron reflectometer

Design and Simulation of Time-of-flight Neutron Reflectometer

Data reduction for time-of-flight small-angle neutron scattering with virtual neutrons

Design of a horizontal neutron reflectometer for the European Spallation Source

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

Technology of Data Analysis for Neutron Reflection

Design and Simulation of a Space-Adjustable Chopper

Optimized Combination of Shutters and Focus Neutron Guides for Neutron Reflectometers

Generalized Data Reduction Approach for Aspheric Testing in A Non-Null Interferometer

Parameter-Free Data Reduction for Short-Time Hypersonic Heat Flux Measurements

Web interface for reflectivity fitting

Demonstration of neutron time-of-flight diffraction with an event-mode imaging detector

An indirect geometry crystal time-of-flight spectrometer for FRM II

Accurate measurements of delayed neutron data for reactor applications: methodology and application to 235U(nth,f)

Investigating model influence on the analytical resolution of neutron reflectometry

Neutron reflectometry on highly absorbing films and its application to 10B4C-based neutron detectors

A general approach to maximise information density in neutron reflectometry analysis

Hierarchical Bayesian approach for adaptive integration of Bragg peaks in time-of-flight neutron scattering data

Inelastic Neutron Scattering Analysis with Time-Dependent Gaussian-Field Models

Study of the Reduction of Neutron Flux Through the Iron Material Using GEANT4 Simulations

Reduction of time-resolved space-based CCD photometry developed for MOST Fabry Imaging data