Abstract:With the continual progress in developing the forward osmosis (FO) membrane, in both industry and academia, it is prospected to remain the best alternative technique for the production of freshwater. The current paper focuses on the preparation and characterization of FO membranes and ZnO nanoparticles (ZnO NPs) that can be used for membrane modification to enhance its performance. FO membranes are fabricated in our labs from the cellulose acetate (CA) polymer by phase inversion methods. These membranes are easy to prepare, stable against bacterial attack, chemical, and mechanical changes, as well as showing excellent performance and superior economics. The optimum conditions for preparing forward osmosis cellulose acetate (FO-CA) membranes are; 7 wt.% CA, 92.75 wt.% acetone, and 0.25 wt.% ZnO NPs per unit percentage of CA in aqueous solution. A new approach for the modification of CA membranes using the synthesized ZnO NPs was shown to enhance the performance of membranes for forward osmosis water desalination process. We study the effect of polymer concentration, membrane thickness, and membrane modification by ZnO NPs on membrane performance. The fabricated membranes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), attenuated total reflectance–Fourier transform infrared spectroscopy, and the mechanical properties were studied in order to expose the best membrane for water desalination and also the synthesized ZnO NPs were characterized by XRD and SEM. The performance of the CA/ZnO NPs membranes were examined using parameters, such as contact angle, surface area and pore size, water flux (Jw), and salt rejection (R%). Compared with the pure CA membrane, the CA membrane modified with ZnO NPs was more hydrophilic, with an improved water contact angle (~47.6 ± 2°) over the pure CA membrane (~63.85 ± 2°) and it showed improving in water flux (26.57 L h-1 m-2) over the pure CA membrane (19.42 L h-1 m-2), also it showed salt rejection 99.5% of Na+, 100% of Cl–, and 99.6% of Mg2+. The water flux increased in the case of CA membrane modified with ZnO NPs is due to increasing in surface area and total pore volume than the pure CA membrane by 23% and 20%, respectively. This demonstrates that the CA membrane modified with ZnO NPs can significantly improve the membrane performances and was suitable to enhance the selectivity, and water flux of the membranes for water desalination.

Preparation and Performance of Cellulose Acetate Forward Osmosis Membrane

Preparation and performance of homogeneous cellulose forward osmosis membrane

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

Fabrication and Performance of Cellulose Acetate Membranes for Forward Osmosis

Fabrication of Cellulose Nanofiltration Membranes by Reusing a Binary Solvent of EMIMAc Ionic Liquid and DMSO

Production and Performance Study of Forward Osmosis Membrane Using Cellulose Triacetate and Cellulose Acetate Combined with Polyethylene Terephthalate Mesh

Preparation method for cellulose acetate forward osmosis membrane

Fabrication and Performance of PET Mesh Enhanced Cellulose Acetate Membranes for Forward Osmosis.

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly(vinyl Chloride) Hollow Fiber Membrane

Improvement of cellulose acetate forward osmosis membrane performance using zinc oxide nanoparticles

Desalination Characteristics of Cellulose Acetate FO Membrane Incorporated with ZIF-8 Nanoparticles

Improving water desalination: Sustainable grafted cellulose acetate reverse osmosis membrane from Egyptian cotton

Preparation and Properties of Thin-Film Composite Forward Osmosis Membranes Supported by Cellulose Triacetate Porous Substrate via a Nonsolvent-Thermally Induced Phase Separation Process

Cellulose Acetate Reverse Osmosis Membranes Made by Phase Inversion Method: Effects of a Shear Treatment Applied to the Casting Solution on the Membrane Structure and Performance

The Optimized Preparation Conditions of Cellulose Triacetate Hollow Fiber Reverse Osmosis Membrane with Response Surface Methodology

Preparation and Characterization of A Novel Polyimide-Urethane Reverse Osmosis Composite Membrane Material

Alginate fouling reduction of functionalized carbon nanotube blended cellulose acetate membrane in forward osmosis

Preparation of Reverse Osmosis Composite Membrane with High Flux by Interfacial Polymerization of Mpd and Tmc

Study on the Preparation of Cellulose Acetate Separation Membrane and New Adjusting Method of Pore Size

Novel thin film composite membranes supported by cellulose triacetate porous substrates for high-performance forward osmosis

High-flux and anti-fouling cellulose nanofiltration membranes prepared via phase inversion with ionic liquid as solvent