A High Precision Electric Servo-Control System

Lin Hui

2007-01-01

Abstract:A high precision electric servo-control system was adopted based on a new multimode and PID control algorithm associated with the fuzzy control algorithm.In particular,the three closed loops including position loop,current loop and speed loop,and the hardware structure of the control system were described in detail.

What problem does this paper attempt to address?

Design and Speed Control for Closed-loop Electro-hydraulic Proportional Servo Injection Machine System

周伟安,应济,王硕,柯敏

DOI: https://doi.org/10.3321/j.issn:1005-5770.2009.12.008

2009-01-01

Abstract:In order to meet the high-precision request of plastic products,reduce costs and energy lost of the injection molding machine,this paper studied injection molding system of closed-loop control system controlled by a servo proportional valve,established the nonlinear model considering the valve flow-pressure nonlinear,injection cylinder volume changing and the polymer melting flow characteristics,provided fuzzy PID control method fitting the system.With the Matlab/Simulink platform,established a simulate model.The result proved the feasibility and effectiveness of the closed-loop control system and control method,compared to the conventional PID control,this control strategy significantly reduced the static error of the system,greatly improved the tracking results of the injection speed,and effectively helped to improve products' repeat precision.
Fuzzy PI Vector Control Design of AC Servo Permanent Magnet Synchronous Motor System

MAO Wenjie,FAN Jianjian,WU Jianhua,LI Chuangping

DOI: https://doi.org/10.3969/j.issn.1005-2895.2013.03.012

2013-01-01

Abstract:In order to improve the performance of permanent magnet synchronous motor(PMSM) servo system,a control system combined with current loop proportional coefficient of fuzzy control and the ordinary PI integral control was designed.PMSM vector control simulation model was built in Matlab/Simulink,with simulation analysis of the traditional PI and fuzzy PI control,and a fuzzy PI vector control of PMSM servo system was built to have experimental analysis.The simulation and experimental results show that the fuzzy PI control enables the system to have better follow-up characteristics,smaller overshoot and good robustness.
Position Servo Control for Pneumatic Actuator with Fuzzy PID

CAO Huifa,TAO Guoliang,ZHOU Hong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.09.047

2006-01-01

Abstract:A fuzzy PID control method was presented which controls the pneumatic actuator servo position system using high-speed switching valves.The results indicate that the control method has good control capability and can increase response speed and restrain the overshoot,and the system has good dynamic and static performance.
Design of Fuzzy Control System for PMSM Based on DSP

WANG Tengda,WANG Zhengshi

DOI: https://doi.org/10.3969/j.issn.1001-6848.2013.06.008

2013-01-01

Abstract:In application of fuzzy PID control,the paper designed a new servo system for permanent magnet synchronous motor.In the proposed scheme,DSP TMS320F2809 was used as the controlling center and IPM was designed as the hardware foundation.The control system uses the classic double-loop structure,the current loop is vector control strategy and the position loop is self-adaptive fuzzy PID controller.In the traditional PID control system,when the PMSM fast startup or shutdown,accelerate or decelerate,it always shows up high overshoot or slow dynamic response problems.By experimental testing and comparing,it is proved that this controlling system can provide significant improvement on these problems.
Design of Speed Control System Based on Fuzzy-PID Hybrid Control for DC Motor

XIAO Jinfeng,SHENG Yifa,XU Zuhua,ZHOU Dao

DOI: https://doi.org/10.3969/j.issn.1001-6848.2011.05.015

2011-01-01

Abstract:In this paper,a new hybrid speed regulating method based on Fuzzy-PID was proposed.It can be used in the speed loop for speed and current closed loop control DC motor control system.When the error between reference speed and real speed is bigger than some threshold value,uses the fuzzy control.But when the error reduces to the threshold value below,changes the PID adjustment.The simulation research on the hybrid speed regulating system of DC motor was carried out.The simulation results show that the system based on this hybrid speed regulating has better dynamic and static performance than the system based on PID speed regulating.A speed control system of DJ23 DC motor used in DDSZ-1 electrical machinery and electrical technology test installation was introduced.The system based on this new hybrid speed regulating method has a control unit of the single-chip Atmega128,using PWMcontrol signal to control DC motor.The results of experiment show that the system is of better robustness and strong practicality and simple structure.
The Application of Fuzzy-PID Controller on Servo System

Xue-fen LI,Jie YANG,Li XU

DOI: https://doi.org/10.3969/j.issn.1673-3851.2005.04.014

2005-01-01

Abstract:Based on the analysis of the revolving servo system, a combined controller is developed.The controller keeps the strong suitability of the PID controller,which has a good static state performance.And it also makes use of the fuzzy logic controller,whose dynamic performance is rather good.After using the combined controller,a satisfying control performance of the servo system can be gained.The experiment image definitely proves it.
High Precision Position Tracking Control of Turntable Based on Fuzzy Feedforward Compound Control

Wei Zhang,Wei Chen,Hongjuan Cui,Wei Bian

DOI: https://doi.org/10.1007/978-981-19-1309-9_18

2022-01-01

Abstract:According to the demand of high-precision position tracking control of a servo turntable, a fuzzy feedforward + PID composite controller is designed. The controller is based on PID control and introduces feedforward control item. The target speed and acceleration are calculated in real time according to the given position of the target, and the feedforward control quantity is calculated through fuzzy control algorithm to correct the output of PID control quantity, so as to realize fast and accurate control of the target Stable and high-precision tracking control. The simulation results show that compared with the simple PID control, the fuzzy feedforward + PID compound control method has advantages in system overshoot, response speed and control accuracy. The experimental results show that the fuzzy feedforward composite controller based on PID has achieved good control results in robustness, rapidity, stability and tracking accuracy, and can meet the requirements of various indexes of the system.
Servo Actuator Control Algorithm Based on Feedforward Fuzzy PI of DSP

周小庆,李平,韩波

DOI: https://doi.org/10.3969/j.issn.1000-3428.2010.14.076

2010-01-01

Abstract:Considering the load torque impact on the speed of servo actuator,this paper establishes the model of load torque and proposes a speed circle control algorithm with feedforward fuzzy self-turning Proportional Integral(PI) parameter.It uses feedforward controller to compensate the variational load influence on motor speed.Through dynamic adjustment of control parameter,the controller has good robustness and accuracy when BrushLess DC Motor(BLDCM) characteristics and load torque change.Fuzzy controller is developed by using Digital Signal Processor(DSP) and applying absolute encoder with high accuracy as the feedback of the position loop.Experimental results show that the controller has high robustness,rapid response,small overshoot and high accuracy.
The Application of Intelligent PID Algorithm Control in Servo System

Shu Zhi-bing

Abstract:The closed-loop system’s parameter installation is important link part to ensure the system performance in the servo system.The simulation model about Panasonic MSMA400W servo motor through MATLAB was established and the function that the servo motor system’s position loop self-tuning by using the intelligent PID control algorithm was realized.The system stability and the reliability was improved.

Engineering,Computer Science
Design and Implementation of Multi-Functional Digital Servos Control System

Houde Liu,Kangkang Dong,Xiaojun Zhu,Xueqian Wang,Bin Liang

DOI: https://doi.org/10.1109/ccdc.2018.8407617

2018-01-01

Abstract:This paper designs a scheme of multi-functional digital servos control system based on STM32. The basic functions of each module are described; the hardware and software structure and working principle of the system are analyzed. In the system three working modes which are Motor mode, Servo mode and Wait mode are provided. There are wired and wireless communication modes between the master chip and PC. The master chip uses a typical PID algorithm to process the position information that is read by contactless magnetic rotary encoder and output the corresponding PWM to control the position and speed of the servos precisely.
Input revising feedforward error compensation control of the high speed precision servo systems

Zhijing Feng,Jinling Liu,Xiaokui Wang,Dan Wu,Chengying Liu

1996-01-01

Abstract:A high speed precision servo system for machining of a kind of special parts is developed. Based on the analysis of the system, a PID regulator is designed and an input revising feedforward error compensation algorithm is proposed. Theoretical analysis shows that this input-revising algorithm can improve the accuracy and the transient response of the system. In such a system as the said servo system, the input of which can be reproduced, it does not need the mathematic model of the system to realize this algorithm. When it is used in the said machining system, the maximum error is decreased from 36 ��m to 7��m.
Fuzzy-PID double mode control of ultra-precision AC servo system

Zesheng Lu,Qiang Zhang

DOI: https://doi.org/10.13700/j.bh.1001-5965.2007.03.016

2007-01-01

Abstract:It is difficult to establish mathematical mode for AC servo system, because it has several disadvantages, such as parameters varying as time, load disturbing, motor being non-linear, and so on. Fuzzy control need not establish the mathematical mode of controlled plant, but steady state precision is bad. A fuzzy-PID double mode controller was presented, which combined fuzzy controller and PID controller. Different controller was adopted in different domain, so the double mode controller combined the advantages of fuzzy controller and PID controller, and get rid of the disadvantages of them. The double mode controller is easy to realize. Experiment results show that the fuzzy-PID double mode controller reduces settling time by 33.7% without overshooting and decreases tracking error by 47.2% in comparison to standard PID controller.
Research on High-Speed Positioning of AC Servo System Based on Feedforward Control

HAO Shuang-hui,ZHENG Wei-feng,CAI Yi,HAO Ming-hui,SONG Fang

DOI: https://doi.org/10.3969/j.issn.1001-3997.2011.04.069

2010-01-01

Abstract:Using traditional PID control strategy is hard to achieve high-speed positioning in AC servo system.To solve the problem,the paper introduced the current feedforward and speed feedforward into the PID control servo system including position/speed and current loop.The simulation validated the perfect effect of feedforward control in instruction signal tracking,and a comparing experiment was carried out between the experiment system and common PID servo control system.The experiment results indicate the PID servo control system including feedforward can achieve high-speed positioning.
Simulation and Implementation of Servo Control System for Electro-hydraulic Hybrid Injection Molding Machine

Yong Zhou,Hao Wu,Tianhao Yang

DOI: https://doi.org/10.1109/SDPC.2019.00073

2019-08-01

Abstract:This paper introduces the composition and working principle of the servo control system. Through the modeling of the injection molding machine load, injection cylinder and servo motor drive system, using the SVPWM principle and designing the fuzzy controller, the overall simulation of the servo system is realized. The simulation results show that the permanent magnet synchronous motor servo system has good servo performance, and the fuzzy controller can effectively control the complex injection system. At the same time, the servo control system is built. The test results show that the speed response performance and pressure response performance of fuzzy control are better. The pressure response time is 168ms and the speed response time is 164ms. Both are below 200ms, fully meeting the requirements of high speed and high response of electro-hydraulic hybrid precision injection molding machine. Compared with the PID control, the fuzzy control maintains the set pressure, and the set pressure value can be well tracked, and the error is greatly reduced.

Engineering,Computer Science
Hardware Design of Electro-Mechanical Actuator System

Cheng Wu,Huailin Zhao,Jihong Zhu

DOI: https://doi.org/10.2991/isrme-15.2015.100

2015-01-01

Abstract:As the important executive body of flight control system, the servo aims to drive the control surface deflection according to the position command. This paper makes a hardware design for a digital electric-mechanical servo controller for valve adjustment. Three-phase brushless DC motor(BLDCM) acts as the core executive body. The system selects DSP + CPLD as the main control unit and the high-precision Linear Variable Differential Transformer (LVDT) as the position sensor. We achieve the digital control through the realization of three closed-loop control strategy including current loop, speed loop and position loop. Experimental results show that the system has high dynamic response speed and great precision static performance.
Servo control for ultrasonic motor using fuzzy logical and self-tuning technique

Hong-lin HE,Hua ZHU,Chun-sheng ZHAO

DOI: https://doi.org/10.3969/j.issn.1000-9787.2005.08.007

2005-01-01

Abstract:Through the work principle and speed characteristic analysis of the motor,the driving frequency is selected for its control variable.In order to control the ultrasonic motor (USM),a hybrid controller,which consists of a fuzzy logical controller (FLC) and a self-tuning controller (STC) is suggested.The FLC is aimed to make the motor run to the desired position as fast as possible for its high robust and quick response characteristic,and the STC is proposed to compensate the stable error.A control system based on the computer is developed to complete the experiments.The results show that quick and accurate positioning can be made using such a hybrid controller.
Precision Positioning System Based on Intelligent Fuzzy-PID Control

Zhen Liu,Liqiong Zhang,Yan Li

DOI: https://doi.org/10.1117/12.886016

2010-01-01

Abstract:To break through the limitations of static and dynamic characteristics of conventional step motor driven open-loop positioning devices, a two-dimensional precision positioning system with a travel range of 100mmx100mm has been developed. This paper presents its structure, control principle and performance experiments. This system, equipped with cross roller guides working as linear guiding elements, is driven by step motors through ball screw transmission. A three-axis dual-frequency laser interferometric measurement system is established for real-time measurement and feedback of system's movements in three degrees of freedom (DOF) and an intelligent Fuzzy-PID controller is implemented for this system's motion control. In the controller, the PID module calculates the output from motor drivers and its initial parameters are tuned through expansion of critical proportioning method; the Fuzzy module optimizes PID parameters to fulfill specific requirements of different movement stages. A dead zone control mechanism is developed in this controller to minimize the oscillations around target position. Experimental results indicate that system with Fuzzy-PID controller shows faster response than that with ordinary PID controller. Moreover, with this controller implemented, the developed precision positioning system achieves better repeatability (+/- 2 mu m) and accuracy (+/- 2.5 mu m) within the full range than open-loop system using step motor.
STUDY ON THE HIGH PERFORMANCE LINEAR SERVO SYSTEM FOR MIDDLE-CONVEX AND VARYING ELLIPSE PISTON MACHINING

江思敏,王先逵,石忠东,吴丹,刘成颖

DOI: https://doi.org/10.3901/jme.2001.09.058

2001-01-01

Journal of Mechanical Engineering

Abstract:This paper presents a kind of new design way of electromechanical system of high performance linear servo motor that is of digital feedback,including the hardware and control system design. This system adopts grating to measure the position and uses the DSP to process the signal, and applies the control algorithm based on a non-linear state observer,then the electromechanical dynamic performance of system has been improved greatly. The control error has been reduced greatly and the track performance has been improved greatly.
Fuzzy-PID Control with Tuning Factors for PMSM Servo System

Shuping WANG,Zhengming ZHAO

DOI: https://doi.org/10.3321/j.issn:1000-0054.2007.01.004

2007-01-01

Abstract:A fuzzy proportional-integral-differential(PID) control with tuning factors was developed to improve the performance of permanent magnet synchronous machine(PMSM) servo systems by eliminating the non-linearities and the indeterminateness in the governing equations.This method combines the merits of fuzzy control with PID control.But choosing the fuzzy control algorithm or PID control algorithm depends on the rotational speed deviation.According to the deviation and the error rate of the system's rotational speed,the fuzzy controller parameters can be adjusted on line using the tuning factors.The simulation results show the fuzzy-PID control system with tuning factors optimizes the dynamic and static performance of the servo system.The control method suggested here is reliable enough to meet the high performance requirements of PMSM servo systems.
Investigation of control algorithm for long-stroke fast tool servo system

Zheng Gong,Dehong Huo,Zengyuan Niu,Wanqun Chen,Islam Shyha

DOI: https://doi.org/10.1016/j.precisioneng.2022.01.006

IF: 3.315

2022-05-01

Precision Engineering

Abstract:Fast tool servo (FTS) is an efficient and reliable method in precision machining for fabricating freeform surfaces or microarrays with sub-micrometric form accuracy. In this paper, a Lorentz force FTS is designed where the voice coil motor is located inside the slide, and four air bearings are used as support components. Three different control algorithms, namely conventional PID control, advanced PID control with velocity/acceleration feed-forward (FF) and sliding mode control (SMC) are implemented in the system, and corresponding Simulink simulation models are built including for both mechanical and electrical systems. The results show that advanced PID and SMC can reduce phase error and overshoot, and tracking error can be controlled at 3.13% at 50 Hz. A new hybrid control algorithm (PID + SMC + FF) is developed, with system tracking error subsequently decreased to 0.871% at 50 Hz. In addition, with a suitable compensation method, the steady state tracking error is further decreased to 0.029%. Consistent results from testing with signals of different input frequency also indicate the general effectiveness of the algorithm.

A High Precision Electric Servo-Control System

Design and Speed Control for Closed-loop Electro-hydraulic Proportional Servo Injection Machine System

Fuzzy PI Vector Control Design of AC Servo Permanent Magnet Synchronous Motor System

Position Servo Control for Pneumatic Actuator with Fuzzy PID

Design of Fuzzy Control System for PMSM Based on DSP

Design of Speed Control System Based on Fuzzy-PID Hybrid Control for DC Motor

The Application of Fuzzy-PID Controller on Servo System

High Precision Position Tracking Control of Turntable Based on Fuzzy Feedforward Compound Control

Servo Actuator Control Algorithm Based on Feedforward Fuzzy PI of DSP

The Application of Intelligent PID Algorithm Control in Servo System

Design and Implementation of Multi-Functional Digital Servos Control System

Input revising feedforward error compensation control of the high speed precision servo systems

Fuzzy-PID double mode control of ultra-precision AC servo system

Research on High-Speed Positioning of AC Servo System Based on Feedforward Control

Simulation and Implementation of Servo Control System for Electro-hydraulic Hybrid Injection Molding Machine

Hardware Design of Electro-Mechanical Actuator System

Servo control for ultrasonic motor using fuzzy logical and self-tuning technique

Precision Positioning System Based on Intelligent Fuzzy-PID Control

STUDY ON THE HIGH PERFORMANCE LINEAR SERVO SYSTEM FOR MIDDLE-CONVEX AND VARYING ELLIPSE PISTON MACHINING

Fuzzy-PID Control with Tuning Factors for PMSM Servo System

Investigation of control algorithm for long-stroke fast tool servo system