Thin-Film Absorbers Based on Gold Nanoparticles Decorated Silicon Nanowires on Thin Gold Film

fugen chen,Jing Wang,Sailing He

DOI: https://doi.org/10.1364/acp.2012.paf4d.1

2012-01-01

Abstract:We proposed a thin-film absorber based on gold nanoparticles decorated silicon nanowires on thin gold film, with which broadband and enhanced absorption was experimentally demonstrated compared with others without gold nanoparticles or gold film.

What problem does this paper attempt to address?

High Absorption Thin-Film Absorber With Gold Nanorod Arrays

Guangyao Su,Deng Xiao,Chuanhong Liu,Fangwang Gou,Zhaoyu Zhang

DOI: https://doi.org/10.1117/12.2041237

2014-01-01

Abstract:Thin film absorber structure is becoming one of the hot topics recently for its various sub-wavelength applications such as photo detector, thermo photovoltaic cells, thin-film thermal emitters, and multi-color filters. In this work, we extended the design principles of single band absorbers to tri-band absorbers based on single nanorod unit which exhibits localized surface plasmon resonances (LSPs). By varying the geometric parameters of nanorod arrays, the absorption spectrum can be tailored. Detailed study was carried out by using finite difference time domain (FDTD) method to reveal the mechanism of high absorption. Even broader absorption could be realized based on this work.
Near-Infrared Broadband Absorber with Film-Coupled Multilayer Nanorods

Xingxing Chen,Hanmo Gong,Shuowei Dai,Ding Zhao,Yuanqing Yang,Qiang Li,Min Qiu

DOI: https://doi.org/10.1364/ol.38.002247

2013-01-01

Abstract:Turning the surfaces of noble metals (metasurfaces) into black (highly absorptive) surfaces can be potentially applied in thermophotovoltaics, sensing, tailoring thermal emissivity, etc. Here we demonstrate an extremely broadband absorber for the 900-1600 nm wavelength range with robust high absorption efficiency. The inexpensive droplet evaporation method is implemented to create patterns of nanoparticles dispersed on a gold film spaced by a thin dielectric layer. The diversity of the complicated random stacking of the chemically synthesized gold nanorods is the major factor for the broad absorption band. Such a metamaterial absorber may pave the way for cost-effective manufacture of large-area black metasurfaces.
Electrochemical Fabrication of Nanoporous Gold

Cheng Fang,Narasimha Murthy Bandaru,Amanda Vera Ellis,Nicolas Hans Voelcker

DOI: https://doi.org/10.1039/c2jm14889g

2012-01-01

Journal of Materials Chemistry

Abstract:We demonstrate the electrochemical etching of gold in a solution of hydrofluoric acid and dimethylformamide (DMF) to fabricate nanoporous gold (NpAu) films. Compared to de-alloyed NpAu, the electrochemically etched NpAu exhibits controllable pore size and etching depth by adjusting the etching conditions. We propose an etching mechanism where the organic electrolyte DMF protects the nascent gold pore walls by slowing the dissolution of gold oxide. At the same time, localized reactions occurring at the gold electrode surface focus the etching current for etching into depth. We further modify the as-prepared NpAu surface with single walled carbon nanotubes (SWCNTs) and use the nanotube-decorated surface as an electrochemical sensor to detect bisphenol A, an endocrine disruptor chemical. A 100 nM limit of detection is achieved by combining the catalytic capacity of SWCNTs with the specific surface area of a NpAu electrode.
Narrowband Absorbers: Spatially and Spectrally Resolved Narrowband Optical Absorber Based on 2D Grating Nanostructures on Metallic Films (advanced Optical Materials 3/2016)

Yurui Qu,Qiang Li,Hanmo Gong,Kaikai Du,Songang Bai,Ding Zhao,Hui Ye,Min Qiu

DOI: https://doi.org/10.1002/adom.201670017

IF: 9

2016-01-01

Advanced Optical Materials

Abstract:On page 480, spatially and spectrally resolved narrowband optical absorbers are presented by Q. Li and co-workers. The devices are based on 2D grating nanostructures with spatially and spectrally resolved narrow-band absorption. The transverse magnetic lattice mode supports both large wavelength-angle sensitivity and large absorption-angle sensitivity. The absorbers can be applied in devices for spatial optical measurement techniques with significantly reduced size and weight.
Gold Nanoparticle Transfer Through Photothermal Effects in A Metamaterial Absorber by Nanosecond Laser

Hanmo Gong,Yuanqing Yang,Xingxing Chen,Ding Zhao,Xi Chen,Yiting Chen,Min Yan,Qiang Li,Min Qiu

DOI: https://doi.org/10.1038/srep06080

IF: 4.6

2014-01-01

Scientific Reports

Abstract:A non-complicated, controllable method of metallic nanoparticle fabrication at low operating light power is proposed. The method is based on laser-induced forward transfer, using a metamaterial absorber as the donor to significantly enhance the photothermal effect and reduce the operating light fluence to 35 mJ/cm(2), which is much lower than that in previous works. A large number of metallic nanoparticles can be transferred by one shot of focused nanosecond laser pulses. Transferred nanoparticles exhibit good size uniformity and the sizes are controllable. The optical properties of transferred particles are characterized by dark-field spectroscopy and the experimental results agree with the simulation results.
Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Peng Chen,Qianju Song,Can Ma,Zao Yi,Liang Bian,Shubo Cheng,Zhiqiang Hao,Tangyou Sun,Pinghui Wu,Qingdong Zeng

DOI: https://doi.org/10.1039/d4dt01626b

2024-07-23

Abstract:In this paper, a broadband solar absorber is constructed and simulated based on the finite difference time domain method (FDTD). The modeled structure of the absorber consists of cyclic stacking of five absorber cells with different periods on refractory metal W, where a single absorber cell is composed of a three-layer SiO2-InAs-TiN square film. Due to the Fabry-Perot resonance and the surface plasmon resonance (SPR), an absorptivity greater than 90% within a bandwidth of 2599.5 nm was achieved for the absorber. Notably, one of these bands, 2001 nm, is a high-efficiency absorption with an absorption rate greater than 99%. The average absorption efficiency reaches 99.31% at an air mass of 1.5 (AM 1.5), and the thermal radiation efficiencies are 97.35% and 97.83% at 1000 K and 1200 K, respectively. At the same time, the structure of the absorber is also polarization-independent, and when the solar incidence angle is increased to 60°, it still achieves an average absorption of 90.83% over the entire wavelength band (280 nm to 3000 nm). The novelty of our work is to provide a design idea based on a unit structure with multiple cycles, which can effectively expand the absorption bandwidth of the absorber in the visible-near-infrared wavelengths. The excellent performances make the structure widely used in the field of solar energy absorption.
Broadband Omnidirectional Perfect Absorber Based on Carbon Nanotube Films

Yuanhao Jin,Tianfu Zhang,Zhongzheng Huang,Jie Zhao,Yuxin Zhao,Zhenlei Wang,Liwen Lai,Jiaping Wang,Kaili Jiang,Shoushan Fan,Qunqing Li

DOI: https://doi.org/10.1016/j.carbon.2020.01.106

IF: 10.9

2020-01-01

Carbon

Abstract:We report the design and simple fabrication process of a perfect absorber based on carbon nanotube films, which enable omnidirectional high absorption efficiency over the wavelength range from 250 nm to 20 mu m with polarization independence. The absorber is fabricated using layers of super-aligned carbon nanotube (SACNT) films assembled in a unique manner, which could be easily prepared on stretchable or rigid substrates or suspended. The promising absorption characteristics of the SACNT films were attributed to not only the intrinsic optical properties of the carbon nanomaterials but also the unique surface nanostructures that efficiently trapped light. Moreover, the absorber and its fabrication method exhibit excellent compatibility with various composed materials and treatment processes. Through combination with ultraviolet-curable resist, a robust, ultrathin, and ultralight absorber with good mechanical properties was fabricated on stretchable substrates. The developed fabrication method opens a new path to realize high absorption performance using carbon nanomaterials and the obtained absorber has broad prospects in aerospace and military applications. (C) 2020 Elsevier Ltd. All rights reserved.
A Thin Film Broadband Absorber Based On Multi-Sized Nanoantennas

Yanxia Cui,Jun Xu,Kin Hung Fung,Yi Jin,Anil K Sarin Kumar,Sailing He,Nicholas Fang

DOI: https://doi.org/10.1063/1.3672002

IF: 4

2011-01-01

Applied Physics Letters

Abstract:We experimentally demonstrate an infrared broadband absorber based on an array of nanostrip antennas of several different sizes. The broadband property is due to the collective effect of magnetic responses excited by these nanoantennas at distinct wavelengths. By manipulating the differences of the nanostrip widths, the measured spectra clearly validate our design for the purpose of broadening the absorption band. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3672002]
Gold nanonails for surface-enhanced infrared absorption

Hang Yin,Nannan Li,Yubing Si,Han Zhang,Baocheng Yang,Jianfang Wang

DOI: https://doi.org/10.1039/d0nh00244e

2020-01-01

Nanoscale Horizons

Abstract:Colloidal gold nanonails, exhibiting large electric field enhancement in the mid-infrared region, are synthesized for surface-enhanced infrared absorption (SEIRA).

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Self-Assembly of Soft and Conformable Broadband Absorbing Nanocellulose-Gold Nanoparticle Composites

Olof Eskilson,Elisa Zattarin,Jennifer Silander,Tomas Hallberg,Christina Åkerlind,Robert Selegård,Kenneth Järrendahl,Daniel Aili

DOI: https://doi.org/10.1021/acsami.4c10244

2024-10-02

Abstract:Broadband light-absorbing materials are of large interest for numerous applications ranging from solar harvesting and photocatalysis to low reflection coatings. Fabrication of these materials is often complex and typically utilizes coating techniques optimized for flat and hard materials. Here, we show a self-assembly based strategy for generating robust but mechanically flexible broadband light-absorbing soft materials that can conform to curved surfaces and surface irregularities. The materials were fabricated by adsorbing large quantities of gold nanoparticles (AuNPs) on the nanofibrils of hydrated bacterial cellulose (BC) membranes by tailoring the interaction potential between the cellulose nanofibrils and the AuNPs. The highly efficient self-assembly process resulted in very dense multilayers of AuNPs on the nanofibrils, causing extensive broadening of the localized surface plasmon resonance band and a striking black appearance of the BC membranes. The nanocomposite materials showed an absorptance >96% in both the visible and the near-infrared wavelength range. The AuNP-functionalized BC membranes demonstrated excellent conformability to curved and structured surfaces and could adopt the shape of highly irregular surface structures without any obvious changes in their optical properties. The proposed self-assembly based strategy enables the fabrication of soft and conformable broadband light-absorbing nanocomposites with unique optical and mechanical properties using sustainable cellulose-based materials.
Metal Nanoparticies Enhanced Optical Absorption In Thin Film Solar Cells

Wanlu Xie,Fang Liu,Di Qu,Qi Xu,Yidong Huang

DOI: https://doi.org/10.1117/12.904358

2012-01-01

Abstract:The plasmonic enhanced absorption for thin film solar cells with silver nanoparticles (NPs) deposited on top of the amorphous silicon film (a-Si:H)solar cells and embedded inside the active layer of organic solar cells (OSCs) has been simulated and analyzed. Obvious optical absorption enhancement is obtained not only at vertical incidence but also at oblique incidence. By properly adjusting the period and size of NPs, an increased absorption enhancement of about 120% and 140% is obtained for a-Si: H solar cells and OSCs, respectively.
Ultra-Narrow-Band Light Dissipation by A Stack of Lamellar Silver and Alumina

Ding Zhao,Lijun Meng,Hanmo Gong,Xingxing Chen,Yiting Chen,Min Yan,Qiang Li,Min Qiu

DOI: https://doi.org/10.1063/1.4881267

IF: 4

2014-01-01

Applied Physics Letters

Abstract:An ultra-narrow band absorber consisting of continuous silver and alumina films is investigated. Owing to Fabry–Pérot resonance and silver's inherent loss, an ultra-narrow spectral range of light can be entirely trapped in the structure. By varying thicknesses of metallic and dielectric films, absorption peak shifts in visible and near-infrared regions. When two such metal-insulator-metal stacks are cascaded, experimental results show that an ultra-narrow absorption bandwidth of 7 nm is achieved, though theoretical results give that of 2 nm. Features of high-efficiency and ultra-narrow band absorption have huge potential in optical filtering, thermal emitter design, etc.
Nanocavity Enhancement for Ultra-Thin Film Optical Absorber.

Haomin Song,Luqing Guo,Zhejun Liu,Kai Liu,Xie Zeng,Dengxin Ji,Nan Zhang,Haifeng Hu,Suhua Jiang,Qiaoqiang Gan

DOI: https://doi.org/10.1002/adma.201305793

IF: 29.4

2014-01-01

Advanced Materials

Abstract:A fundamental strategy is developed to enhance the light-matter interaction of ultra-thin films based on a strong interference effect in planar nanocavities, and overcome the limitation between the optical absorption and film thickness of energy harvesting/conversion materials. This principle is quite general and is applied to explore the spectrally tunable absorption enhancement of various ultra-thin absorptive materials including 2D atomic monolayers.
Ultra-broad Band Absorber Made by Tungsten and Aluminium

Wei Wang,Ding Zhao,Qiang Li,Min Qiu

DOI: https://doi.org/10.1088/1742-6596/680/1/012039

2016-01-01

Journal of Physics Conference Series

Abstract:A broadband absorber comprising tungsten cubic arrays, a alumina layer and a tungsten film, is numerically and experimentally investigated, which exhibits near-unity absorption of visible and near-infrared light from 400 nm to 1150 nm. Benefiting from high melting points of tungsten and alumina, this device has great application potential in solar cells and thermal emission.
Tunable Plasmonic Perfect Absorber for Hot Electron Photodetection in Gold-Coated Silicon Nanopillars

Tangyou Sun,Wenke Song,Zubin Qin,Wenjing Guo,Peihua Wangyang,Zhiping Zhou,Yanrong Deng

DOI: https://doi.org/10.3390/photonics10010060

IF: 2.536

2023-01-01

Photonics

Abstract:Infrared detection technology has important applications in laser ranging, imaging, night vision, and other fields. Furthermore, recent studies have proven that hot carriers which are generated by surface plasmon decay can be exploited for photodetection to get beyond semiconductors' bandgap restriction. In this study, silicon nanopillars (NPs) and gold film at the top and bottom of silicon nanopillars were designed to generate surface plasmon resonance and Fabry-Perot resonance to achieve perfect absorption. The absorption was calculated using the Finite Difference Time Domain (FDTD) method, and factors' effects on resonance wavelength and absorption were examined. Here we demonstrate how this perfect absorber can be used to achieve near-unity optical absorption using ultrathin plasmonic nanostructures with thicknesses of 15 nm, smaller than the hot electron diffusion length. Further study revealed that the resonance wavelength can be redshifted to the mid-infrared band (e.g., 3.75 mu m) by increasing the value of the structure parameters. These results demonstrate a success in the study of polarization insensitivity, detection band adjustable, and efficient perfect absorption infrared photodetectors.
Spatially and Spectrally Resolved Narrowband Optical Absorber Based on 2D Grating Nanostructures on Metallic Films

Yurui Qu,Qiang Li,Hanmo Gong,Kaikai Du,Songang Bai,Ding Zhao,Hui Ye,Min Qiu

DOI: https://doi.org/10.1002/adom.201500651

IF: 9

2016-01-12

Advanced Optical Materials

Abstract:Two spatially and spectrally resolved narrowband absorbers based on 2D grating nanostructures (polymethylmethacrylate (PMMA) grating and gold grating) on metallic films are designed, fabricated, and characterized. For PMMA grating on a metallic film, the measured absorption bandwidth is 12 nm with a nearly 80% absorption at normal incidence. The transverse electric (TE) localized mode shows a calculated 3.5° angular width. The transverse magnetic (TM) resonant mode supports both a localized mode and a lattice mode. The TM lattice mode shows a calculated angular width of 0.75° and exhibits a large wavelength‐angle sensitivity of nearly 15 nm per degree and a large absorption‐angle sensitivity of 77.5% per degree. For gold grating on a metallic film, the measured absorption bandwidth is 40 nm with a nearly 70% absorption. Such spatially and spectrally resolved 2D nanostructure arrays with large angle sensitivities have potential applications in angle measurement, thermal emitters, optical filters, and biosensors. Two kinds of spatially and spectrally resolved narrowband optical absorbers based on 2D grating are experimentally presented. The TM lattice mode shows a large wavelength‐angle sensitivity of 15 nm per degree and a large absorption‐angle sensitivity of 77.5% per degree. Such 2D nanostructure arrays have potential applications in angle measurement, thermal emitters, optical filters, and biosensors.

materials science, multidisciplinary,optics
Near Infrared Perfect Absorber Based on Phosphorene-Gold Nano-Grating Surface Plasmon Resonance

Dayyani Saeed,Shojaeihagh Naser,Hossein Shirkani

DOI: https://doi.org/10.1007/s11468-024-02535-7

IF: 2.726

2024-09-23

Plasmonics

Abstract:Optical absorbers are widely utilized in plasmonic sensors, optical switch, and solar-cells due to their effectiveness in capturing electromagnetic radiation. Furthermore, these devices can be tailored to optimize absorption at particular wavelengths within the mid-infrared spectrum. In this study, a perfect optical absorber was designed which included a Silica substrate with di-electric nano rode which is doped in Silica, Gold grating, a phosphorene layer which is cover structure. The effects of coupling between the nanorod and gold grating were investigated using the finite element method. The results indicate that, within the designed structure, the placement of the nanorod in the substrate significantly enhances absorption to more than 98% and the independence of absorbance from the thickness of phosphorene (i.e. less than 0.1% variation in the absorption). This perfect absorber operates over a narrow absorption range of 4 to 16 nm which is a good candidate to optical filters.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light

Niklas Luhmann,Dennis Høj,Markus Piller,Hendrik Kähler,Miao-Hsuan Chien,Robert G. West,Ulrik Lund Andersen,Silvan Schmid

DOI: https://doi.org/10.48550/arXiv.1911.13126

2019-11-29

Optics

Abstract:Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, it is possible to achieve a wavelength-independent absorptivity of up to 50 %, depending on the dielectric properties of the underlying substrate. However, existing absorber films typicallyrequire a thickness of the order of tens of nanometers, such as titanium nitride (14 nm), whichcan significantly deteriorate the response of a thermal transducers. Here, we present the application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer as an effective IR absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3) %, ranging from 2 $\mu$m to 20 $\mu$m, could be obtained and is further discussed. The presented gold thin-film represents analmost ideal impedance-matched IR absorber that allows a significant improvement of state-of-the-art thermal detector technology.
Infrared Perfect Absorber Based on Nanowire Metamaterial Cavities.

Yingran He,Huixu Deng,Xiangyang Jiao,Sailing He,Jie Gao,Xiaodong Yang

DOI: https://doi.org/10.1364/ol.38.001179

IF: 3.6

2013-01-01

Optics Letters

Abstract:An infrared perfect absorber based on a gold nanowire metamaterial cavities array on a gold ground plane is designed. The metamaterial made of gold nanowires embedded in an alumina host exhibits an effective permittivity with strong anisotropy, which supports cavity resonant modes of both electric dipole and magnetic dipole. The impedance of the cavity modes matches the incident plane wave in free space, leading to nearly perfect light absorption. The incident optical energy is efficiently converted into heat so that the local temperature of the absorber will increase. Results show that the designed absorber is polarization-insensitive and nearly omnidirectional for the incident angle.
Optical Absorbers: Nanocavity Enhancement for Ultra‐Thin Film Optical Absorber (adv. Mater. 17/2014)

Haomin Song,Luqing Guo,Zhejun Liu,Kai Liu,Xie Zeng,Dengxin Ji,Nan Zhang,Haifeng Hu,Suhua Jiang,Qiaoqiang Gan

DOI: https://doi.org/10.1002/adma.201470113

IF: 29.4

2014-01-01

Advanced Materials

Abstract:On page 2737, Q. Gan, S. Jiang, and co-workers develop a fundamental strategy to enhance the light-matter interaction of ultra-thin (i.e., 1.5–3 nm) Ge films based on a strong interference effect in planar nanocavities, and overcome the limitation between the optical absorption and film thickness of energy-harvesting/conversion materials. This principle is quite general and can be applied to explore the spectrally tunable absorption enhancement of various ultra-thin absorbing materials.

Thin-Film Absorbers Based on Gold Nanoparticles Decorated Silicon Nanowires on Thin Gold Film

High Absorption Thin-Film Absorber With Gold Nanorod Arrays

Near-Infrared Broadband Absorber with Film-Coupled Multilayer Nanorods

Electrochemical Fabrication of Nanoporous Gold

Narrowband Absorbers: Spatially and Spectrally Resolved Narrowband Optical Absorber Based on 2D Grating Nanostructures on Metallic Films (advanced Optical Materials 3/2016)

Gold Nanoparticle Transfer Through Photothermal Effects in A Metamaterial Absorber by Nanosecond Laser

Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Broadband Omnidirectional Perfect Absorber Based on Carbon Nanotube Films

A Thin Film Broadband Absorber Based On Multi-Sized Nanoantennas

Gold nanonails for surface-enhanced infrared absorption

Self-Assembly of Soft and Conformable Broadband Absorbing Nanocellulose-Gold Nanoparticle Composites

Metal Nanoparticies Enhanced Optical Absorption In Thin Film Solar Cells

Ultra-Narrow-Band Light Dissipation by A Stack of Lamellar Silver and Alumina

Nanocavity Enhancement for Ultra-Thin Film Optical Absorber.

Ultra-broad Band Absorber Made by Tungsten and Aluminium

Tunable Plasmonic Perfect Absorber for Hot Electron Photodetection in Gold-Coated Silicon Nanopillars

Spatially and Spectrally Resolved Narrowband Optical Absorber Based on 2D Grating Nanostructures on Metallic Films

Near Infrared Perfect Absorber Based on Phosphorene-Gold Nano-Grating Surface Plasmon Resonance

Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light

Infrared Perfect Absorber Based on Nanowire Metamaterial Cavities.

Optical Absorbers: Nanocavity Enhancement for Ultra‐Thin Film Optical Absorber (adv. Mater. 17/2014)