Abstract:Ni–SiC nano-composite coating, which simultaneously composed of both nanocrystalline consecutive Ni matrix and dispersed inert SiC nano-particles, has been fabricated by ultrasonic electroplating technique from a modified Watts bath containing SiC nano-particles. The influence of mechanical stirring and ultrasonication on the surface morphology of the nanocrystalline Ni–SiC nano-composite film has also been investigated. The surface morphology, microstructure, anti-corrosion property and electrocatalytic activity for hydrogen evolution of the obtained nanocrystalline Ni–SiC nano-composite film, are characterized using scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) system, atomic force microscopy (AFM), transmission electron microscope (TEM), X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS) techniques. The results find that, mechanical stirring mainly prevents the sedimentation of the inert particles suspended in solutions, while ultrasonication mainly prevents the particles agglomeration. In the case of only mechanical stirring to disperse the SiC nano-particles, the composite surface is cauliflower alike. While in the case of both mechanical stirring and ultrasonication, the obtained Ni–SiC composite film is much smoother and composes of particles with the mean diameter of 42.9nm, and SiC particles are uniformly dispersed into Ni matrix. Meanwhile, the results obtained by polarization curves and EIS methods show that, when compared with the traditional polycrystalline Ni film, the obtained Ni–SiC nano-composite film exhibits the enhanced corrosion resistance in NaCl solutions, possesses much higher electrocatalytic activity for hydrogen evolution in KOH solutions.

Study on Ni-P-(Ni/SiC)_P Electroless Composite Coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

A Study on the Electrocodeposition Processes and Properties of Ni–SiC Nanocomposite Coatings

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Investigation on Microstructure and Properties of the Electrodeposited Ni-SiC Composite Coating

Electrochemical Properties and XPS Analysis of Ni-B/SiC Nanocomposite Coatings

Comparative study on the wear resistance and corrosion resistance of NiW and NiCoW composite coatings with micro- and nano-SiC particles

Study of fabrication and wear properties of Ni–SiC composite coatings on A356 aluminum alloy

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Mechanically Assisted Electroless Barrel-Plating Ni-P Coatings Deposited on Carbon Steel

Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless Plating

Electrodeposition of Ni-P composite coatings: A review

Electroless Co-P Alloy Plating of Superfine Si3N4 Powders

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Preparation, Mechanical Properties and Wear Resistance of Ni–W/SiC Nanocomposite Coatings

Effect of SiC Nanoparticles on the Structure and Properties of Ni+W-SiC Nanocoatings

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Microstructure evolution, mechanical and abrasive wear properties of NiCrSiB-SiC composite coatings prepared on 16Mn low-carbon steel by Ni-based alloy catalyzed SiC decomposition

Effect of SiC Contents on Wear Resistance Performance of Electro-Codeposited Ni-SiC Composite Coatings

Study on Ni-P-nanoTiN Electroless Composite Coating