Abstract:Spent fuel contains many elements including those that are radioactive. Separation and recovery of these substances have been challenging. This paper presents an efficient strategy for stepwise separation of the rare earth, strontium, molybdenum, and zirconium from the simulated raffinate of a uranium/plutonium co-purification process. This strategy employed three extractants with different metal ion selectivity, and cyclohexanediamine tetraacetic acid (CDTA) was introduced as a complexing agent to inhibit the extraction of Zr(IV) and precious metals. The recovery efficiency of all the rare earth elements was more than 97 % through the three-stage extraction, with N,N,N′,N′-tetranoctyl-diglycolamide (TODGA) as the extractant and N,N-dibutyloctanamide (DBOA) as the phase modifiers. Sr(II) was selectively recovered using N,N,N′,N′-tetracyclohexyl-diglycolamide (TCHDGA). A bisphosphonic acid extractant, N,N-hexadecylamine bis (methylene phenylphosphonic acid) (HADMPPA), was designed and synthesized for the selective separation of Zr(IV) and Mo(VI). The separation conditions of the recovered elements from other elements in each step were systematically examined. Moreover, the mechanism of the extraction reaction was investigated using FTIR spectroscopy, the slope method, and the equimolar series method. To our knowledge, this is the first time that four groups of major elements have been sequencially separated from the simulated high-level waste liquid in one process. This work could contribute to nuclear fuel reprocessing as well as the sustainable development of nuclear energy.

Electrolytic Partitioning of Uranium and Plutonium Based on a New Type of Electrolytic Mixer-Settler

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Advances in partitioning of minor actinides and rare earths from high level liquid waster

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

PIV Measurement and CFD Simulation of Liquid-Liquid Flow of a Settler in Rare Earths Solvent Extraction Mixer-Settler

Fast Uranium Electro-Extraction Through Synergistic Hydrophilic Channel and Modulating Local Interfacial Species

Development of an Advanced Ion Exchange Process for Reprocessing Spent Nuclear Fuels

Development of a three-stage, cross-current air sparged mixer-settler for the purification of degraded PUREX solvent

Progress and Discussion on Chemical Separation Technologies for Nuclear Fuel Reprocessing Developed Abroad

Experimental testing and process simulation of flowsheets for the co-separation of uranium and plutonium using acetohydroxamic acid as a complexing agent

Efficient Separation of Uranium and Lanthanides Based on High-Performance Ion Exchange Chromatography

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Development Of A Test System For High Level Liquid Waste Partitioning

Demonstration of an Improved Total Partitioning Process for High Level Liquid Waste Using Annular Centrifugal Contactors

Extraction Performance of a New Mixer-settler with Membrane Dispersion Technique

Summary of New Type of Ф1600 High Efficient Uranium Hydrometallurgy Fixed Bed Ion-exchange Device

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

An Efficient Elution Method of Tetravalent Uranium from Anion Exchanger by Using Formic Acid Solution

Precipitation–Flotation Process for Molybdenum and Uranium Separation from Wastewater

Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel