Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

Prediction Model for Increasing Propylene from FCC Gasoline Secondary Reactions Based on Levenberg–Marquardt Algorithm Coupled with Support Vector Machines

Adaptive Soft-Sensor Modeling Algorithm Based on Fcmisvm and Its Application in Px Adsorption Separation Process

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Melt Index Prediction by Fuzzy Functions and Weighted Least Squares Support Vector Machines

A Least Squares SVM Algorithm for NIR Gasoline Octane Number Prediction

Melt Index Prediction by Weighted Least Squares Support Vector Machines

Optimal Online Soft Sensor for Product Quality Monitoring in Propylene Polymerization Process

Determination of Gasoline Octane Number Using Raman Spectroscopy and Least Squares Support Vector Machines

Soft-Sensing Research on Ethylene Polymerization Based on Pca-Svr Algorithm

Prediction of Octane Number for Clean Gasoline Obtained from Secondary Reaction Based on LM/SVM Approach

Application Research of LS-SVMs Algorithm on Gasoline Blending Modeling

Prediction of research octane number loss and sulfur content in gasoline refining using machine learning

Modeling and optimization for the secondary reaction of FCC gasoline based on the fuzzy neural network and genetic algorithm

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

An Intelligent SVM Modeling Process for Crude Oil Properties Prediction Based on a Hybrid GA-PSO Method

A Hybrid Model of Solvent Hehydratic Distillation Column Based on Mechanism and LS-SVM

Application of Least Square Support Vector Machine Based on Particle Swarm Optimization in Quantitative Analysis of Gas Mixture

Modeling of hydrogen recovery membrane separation process based on PCA-LSSVM

Melt index prediction of propylene polymerization based on LSSVM using swarm intelligence optimization

Prediction for the secondary reaction of FCC gasoline by Fnn-Ga method

KPCA and LS-SVM Prediction Model for Hydrogen Gas Concentration