Abstract:The hybrid electrode of single-wall carbon nanotubes (SWCNTs)/Cu2O/ZnO nanorods (NRs)/graphene used on the current-response nonenzymatic glucose sensor was investigated herein, regarding the mechanism of the formation of functional channel. The synthesis of the hybrid electrode involved four steps. First, the graphene was grown by chemical vapor deposition (CVD) and then wet-transferred onto indium transparent oxide (ITO) glass. Second, a zinc oxide (ZnO) seed layer was sputtered onto the graphene/ITO glass, and ZnO NRs were gradually grown by the hydrothermal method. Third, the ZnO NRs were clad with cuprous oxide (Cu2O) by the electrochemical method. Fourth, the SWCNTs were dropped onto the Cu2O surface, with a Nafion surfactant. X-ray diffraction spectra, scanning electron microscopy spectra, Raman spectra, cyclic voltammograms, and amperometric response diagrams were used to verify the performance of the device. Results showed that sensitivity increased significantly from 11.2 to 289.8 μA mM–1 cm–2, linear range increased significantly from 0.6 to 11.1 mM, and the coefficient of determination (R2) increased from 0.9766 to 0.9923, all by the addition of the SWCNTs/Cu2O functional channel mechanism and without graphene. When the graphene was added to the functional channel electrode, sensitivity increased again from 289.8 to 466.1 μA mM–1 cm–2 at low concentrations.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07943?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07943</a>.Deposition parameters of the ZnO seed layer, deposition parameters of the chronoamperometry method, fabrication process of wet transfer of graphene onto ITO glass, ZnO NRs grown with the hydrothermal method, fabrication process of Cu2O on the ZnO NRs by the electroplated method, and fabrication process of SWCNTs onto Cu2O/ZnO NRs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07943/suppl_file/am0c07943_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nonenzymatic Glucose Sensor Using Freestanding Single-Wall Carbon Nanotube Films

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

Glucose biosensor using non-woven single-walled carbon nanotube films

Co-immobilization of glucose oxidase and xylose dehydrogenase displayed whole cell on multiwalled carbon nanotube nanocomposite films modified electrode for simultaneous voltammetric detection of D-glucose and D-xylose.

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Single-wall Carbon Manotubes As Immobilization Material for Glucose Biosensor

A New Application of Carbon Nanotubes Constructing Biosensor

Direct Decoration of Carbon Nanohorns with Binary Nickel-Cobalt Sulfide Nanosheets Towards Non-Enzymatic Glucose Sensing in Human Fluids

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes.

Nanostructured biosensors built by layer-by-layer electrostatic assembly of enzyme-coated single-walled carbon nanotubes and redox polymers

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Glucose biosensor based on glucose oxidase immobilized on a nanofilm composed of mesoporous hydroxyapatite, titanium dioxide, and modified with multi-walled carbon nanotubes

Electrochemical Glucose Sensor using Single-Wall Carbon Nanotube Field Effect Transistor

A Glucose Sensor Based on Glucose Oxidase Immobilized by Electrospinning Nanofibrous Polymer Membranes Modified with Carbon Nanotubes

Electroanalytical biosensor based on GOx/FCA/PEG-modified SWCNT electrode for determination of glucose

One-Dimensional Copper Oxide Nanoparticles Embedded Conductive Nanotube Arrays for High Performance Glucose Sensors

Nanoscale Ni(OH)(x) Films on Carbon Cloth Prepared by Atomic Layer Deposition and Electrochemical Activation for Glucose Sensing

A Nano-Ni Based Ultrasensitive Nonenzymatic Electrochemical Sensor for Glucose: Enhancing Sensitivity Through a Nanowire Array Strategy.

Study of the Nonenzymatic Glucose Sensor Based on Highly Dispersed Pt Nanoparticles Supported on Carbon Nanotubes

A Nano-Ni Based Ultrasensitive Nonenzymatic Electrochemical Sensor For Glucose: Enhancing Sensitivity Through A Nanowire Array Strategy

Functional Channel of SWCNTs/Cu 2 O/ZnO NRs/Graphene Hybrid Electrodes for Highly Sensitive Nonenzymatic Glucose Sensors