Abstract:Monolithic PET detector design is promising for low cost, high packing fraction, intrinsic depth-of-interaction (DOI) capability as well as potentially better energy and timing resolution compared to the conventional segmented crystal-based detector design. In this work, we developed a monolithic detector with 3D positioning capability and readout channel number compression. The detector contains a monolithic LYSO crystal (size: 25 mm × 25 mm × 14 mm) coupled to a 6 × 6 SiPM array (SensL FC30035). Two 3D positioning algorithms including statistical-based positioning (SBP) and artificial neural network (ANN) were developed to estimate gamma ray interaction positions inside the crystal. To simplify detector electronics design, two readout channel number compression strategies respectively based on Anger and principal component analysis (PCA) were proposed. With Anger, the readout channel number was compressed from 36 to 12 while with PCA the readout channel number was respectively compressed to 12 (PCA12), 6 (PCA6) and 4 (PCA4) corresponding to using different number of principal component vectors. The results demonstrate that 3D positioning capability is achievable with both SBP and ANN and the positioning resolution in x, y and z direction are respectively 2.58 mm, 2.56 mm and 4.79 mm with SBP, and 2.02 mm, 2.03 mm and 3.96 mm with ANN. Both strategies can effectively reduce the readout channel number without inducing degradations in detector positioning performance. With Anger and PCA12, almost no degradation is observed in positioning performance compared to no compression. With PCA6 or PCA4, deteriorations in positioning performance in z direction are observed, especially with PCA4, although there is no significant degradation in × or y direction. We conclude that the developed monolithic detector is promising for its 3D positioning capability as well as engineering application value with compressed readout channel number in PET system designs.

Advancements and applications of monolithic pixel detector

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

A Simulation System and Its Applications for Signal Readout of CMOS Pixel Sensors in High Energy Physics Experiments

Depleted fully monolithic CMOS pixel detectors using a column based readout architecture for the ATLAS Inner Tracker upgrade

Cross talk of a large-scale depleted monolithic active pixel sensor (DMAPS) in 180 nm CMOS technology

Cross-talk of a large-scale depleted monolithic active pixel sensor (DMAPS) in 180Â nm CMOS technology

Development of depleted monolithic pixel sensors in 150 nm CMOS technology for the ATLAS Inner Tracker upgrade

Randomized protocols for asynchronous consensus

Development of a Depleted Monolithic CMOS Sensor in a 150 nm CMOS Technology for the ATLAS Inner Tracker Upgrade

2D Detectors for Particle Physics and for Imaging Applications

Charge collection and efficiency measurements of the TJ-Monopix2 DMAPS in 180$\,$nm CMOS technology

The Monopix chips: Depleted monolithic active pixel sensors with a column-drain read-out architecture for the ATLAS Inner Tracker upgrade

Monolithic Integration of Superconducting-Nanowire Single-Photon Detectors with Josephson Junctions for Scalable Single-photon Sensing

Upgrade of the ALICE Inner Tracking System

Current Status and Development of CMOS SiPM for Scintillator-Based Radiation Detectors Toward All-Digital Sensors [Invited]

Silicon-Compatible Photodetectors: Trends to Monolithically Integrate Photosensors with Chip Technology

CMS Pixel Detector Upgrade

3D Positioning and Readout Channel Number Compression Methods for Monolithic PET Detector

A Review of SOI Monolithic Active Pixel Sensors for Radiation Detection Applications

R&D for the CLIC Vertex and Tracking detectors

Applications of CMOS technology at the ALICE experiment