Solute-particle Separation in Microfluidics Enhanced by Symmetrical Convection.

Yurou Yao,Yao Lin,Zerui Wu,Zida Li,Xuemei He,Yun Wu,Zimin Sun,Weiping Ding,Liqun He

DOI: https://doi.org/10.1039/d3ra07285a

IF: 4.036

2024-01-01

RSC Advances

Abstract:The utilization of microfluidic technology for miniaturized and efficient particle sorting holds significant importance in fields such as biology, chemistry, and healthcare.

What problem does this paper attempt to address?

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Chao Wang,Sifan Sun,Ying Chen,Zhengdong Cheng,Yuxiu Li,Lisi Jia,Pengcheng Lin,Zhi Yang,Riyang Shu

DOI: https://doi.org/10.1007/s10404-018-2035-7

2018-01-01

Microfluidics and Nanofluidics

Abstract:Focusing particles into a tight stream is usually a necessary step prior to counting, detecting and sorting them. Meanwhile, particle spacing control in microfluidic devices could also be applied in the field of accurate cell detection, material synthesis and chemical reaction. To achieve simultaneous particle focusing and spacing control, a novel microchannel composed by Dean and sheath flow section was proposed and fabricated according to the elaborated design principle with its manipulating performance in situ visualized. Using microspheres with a few microns as a template, the trajectory of the particles was discovered to follow lateral migration and reach certain equilibrium positions at the end of the designed Dean section. After being focused, the streamline was further concentrated and centralized with a controllable interparticle distance in sheath flow section. For sheath flow section, the angle between symmetrical tributaries and the mainstream channel and abrupt constriction/expansion structure of mainstream channel as important channel geometric features were investigated to minimize the focusing streamline width and optimize spacing control. An modified analytical model for sheath flow with different tributary angles was derived and proved to well describe the microsphere spacing control process.
Multifunctional Acoustofluidic Centrifuge Device Using Tri-Symmetrical Design for Particle Enrichment and Separation and Multiphase Microflow Mixing

Hemin Pan,Deqing Mei,Chengyao Xu,Wanyu Weng,Shuo Han,Yancheng Wang

DOI: https://doi.org/10.1016/j.seppur.2023.123215

IF: 8.6

2023-01-01

Separation and Purification Technology

Abstract:Effective enrichment and separation of particles and mixing of multiphase microflows can be technically challenging in microfluidic sample processing and analysis. Acoustofluidic techniques have advantages such as high biocompatibility, versatility, and simple device design to meet these demands. Here, we present a novel tri-symmetrical acoustofluidic centrifuge based on traveling surface acoustic waves (TSAWs), achieving particle enrichment and bidirectional size-based separation, pushing away the larger particles while enriching the smaller ones, in a rapid time (<6 s). A microfluidic chamber was designed for further extraction of treated particles and cells. Experimental results show that our device can achieve enrichment of particles in a range of sizes and high purity separation (e.g. >90 % in 5 µm and 40 µm sample), demonstrating its sample processing capabilities. The acoustic treatment did not affect cells (consistent with the control group above 80 %). TSAW-induced acoustic streaming enabled efficient mixing (mixing efficiency χ >85 %) of fluorescent multi-phase microflows within a short time (<0.5 s). The underlying physical mechanisms have been verified by numerical simulations.
Microfluidic Co-Flow of Newtonian and Viscoelastic Fluids for High-Resolution Separation of Microparticles.

Fei Tian,Wei Zhang,Lili Cai,Shanshan Li,Guoqing Hu,Yulong Cong,Chao Liu,Tiejun Li,Jiashu Sun

DOI: https://doi.org/10.1039/c7lc00671c

IF: 7.517

2017-01-01

Lab on a Chip

Abstract:The microfluidic passive control of microparticles largely relies on the hydrodynamic effects of the carrier media such as Newtonian fluids and viscoelastic fluids. Yet the viscoelastic/Newtonian interfacial effect has been scarcely investigated, especially for high-resolution particle separation. Here we report a microfluidic co-flow of Newtonian (water or PBS) and viscoelastic fluids (PEO) for the size-dependent separation of microparticles. The co-flow condition generates a stable viscoelastic/Newtonian interface, giving rise to the wall-directed elastic lift forces that compete with the center-directed lift forces, and efficiently hinders the migration of microparticles from the Newtonian to the viscoelastic fluid in a size-dependent manner. An almost complete separation of a binary mixture of 1 μm and 2 μm polystyrene particles is achieved by the co-flow of water and a very dilute PEO solution (100 ppm), whereas the sole use of water or PEO could not lead to an efficient separation. This co-flow microfluidic system is also applied for the separation of Staphylococcus aureus (1 μm) from platelets (2-3 μm) with >90% efficiencies and purities.
Efficient Microfluidic Particle Separation Using Inertial Pre-Focusing and Pre-Separation Structures Without Sheath Flow

hou shuyue,Ling Zhao,JIE Yu,Zhuoyang Wang,Junping Duan,Binzhen Zhang

DOI: https://doi.org/10.1088/1402-4896/ad7236

2024-08-24

Physica Scripta

Abstract:This study introduces an innovative microfluidic particle separation technique that integrates inertial focusing with deterministic lateral displacement (DLD) on a single chip, significantly enhancing the efficiency of particle separation. This new method completes flow rate matching through a designed pre-focusing and pre-separation inertial structure, avoiding the use of sheath flow. The process involves a sequence of channels: a rectangular channel, a contraction-expansion array (CEA), a lateral separation channel, and another rectangular channel. This three-stage inertial method shortens the focusing channel length and reduces the pressure on subsequent separation stages, streamlining the separation process. It has been demonstrated to separate 20 μm particles from a mixture containing both 10 μm and 20 μm particles with remarkable precision. The technique achieves a 100% separation efficiency, ensuring all target particles are correctly isolated, and a 96.1% separation purity, indicating that the isolated particles are almost entirely free from contaminants. By eliminating the need for sheath flow, this method simplifies the apparatus and reduces operational complexity, offering significant advantages over traditional particle separation techniques. The high efficiency and purity levels achieved by this method highlight its potential for a wide range of applications in fields requiring precise particle separation, such as medical diagnostics, environmental monitoring, and industrial processing.

physics, multidisciplinary
Microfluidic Technology for the Isolation and Analysis of Exosomes

Yusong Wu,Yuqing Wang,Yanjun Lu,Xiaomei Luo,Yinghong Huang,Ting Xie,Christian Pilarsky,Yuanye Dang,Jianye Zhang

DOI: https://doi.org/10.3390/mi13101571

IF: 3.4

2022-09-22

Micromachines

Abstract:Exosomes are lipid-bilayer enclosed vesicles with diameters of 30–150 nm, which play a pivotal role in cell communication by transporting their cargoes such as proteins, lipids, and genetic materials. In recent years, exosomes have been under intense investigation, as they show great promise in numerous areas, especially as bio-markers in liquid biopsies. However, due to the high heterogeneity and the nano size of exosomes, the separation of exosomes is not easy. This review will deliver an outline of the conventional methods and the microfluidic-based technologies for exosome separation. Particular attention is devoted to microfluidic devices, highlighting the efficiency of exosome isolation by these methods. Additionally, this review will introduce advances made in the integrated microfluidics technologies that enable the separation and analysis of exosomes.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Size-Based Separation of Particles and Cells Utilizing Viscoelastic Effects in Straight Microchannels.

Chao Liu,Chundong Xue,Xiaodong Chen,Lei Shan,Yu Tian,Guoqing Hu

DOI: https://doi.org/10.1021/acs.analchem.5b00516

IF: 7.4

2015-01-01

Analytical Chemistry

Abstract:Viscoelasticity-induced particle migration has recently received increasing attention due to its ability to obtain high-quality focusing over a wide range of flow rates. However, its application is limited to low throughput regime since the particles can defocus as flow rate increases. Using an engineered carrier medium with constant and low viscosity and strong elasticity, the sample flow rates are improved to be 1 order of magnitude higher than those in existing studies. Utilizing differential focusing of particles of different sizes, here, we present sheathless particle/cell separation in simple straight microchannels that possess excellent parallelizability for further throughput enhancement. The present method can be implemented over a wide range of particle/cell sizes and flow rates. We successfully separate small particles from larger particles, MCF-7 cells from red blood cells (RBCs), and Escherichia coli (E. coli) bacteria from RBCs in different straight microchannels. The proposed method could broaden the applications of viscoelastic microfluidic devices to particle/cell separation due to the enhanced sample throughput and simple channel design.
Sorting and separation of microparticles by surface properties using liquid crystal-enabled electro-osmosis

Chenhui Peng,Taras Turiv,Yubing Guo,Qi-Huo Wei,Oleg D. Lavrentovich

DOI: https://doi.org/10.48550/arXiv.1808.10559

2018-08-31

Abstract:Sorting and separation of microparticles is a challenging problem of interdisciplinary nature. Existing technologies can differentiate microparticles by their bulk properties, such as size, density, electric polarizability, etc. The next level of challenge is to separate particles that show identical bulk properties and differ only in subtle surface features, such as functionalization with ligands. In this work, we propose a technique to sort and separate particles and fluid droplets that differ in surface properties. As a dispersive medium, we use a nematic liquid crystal (LC) rather than an isotropic fluid, which allows us to amplify the difference in surface properties through distinct perturbations of LC order around the dispersed particles. The particles are placed in a LC cell with spatially distorted molecular orientation subject to an alternating current electric field. The gradients of the molecular orientation perform two functions. First, elastic interactions between these pre-imposed gradients and distortions around the particles separate the particles with different surface properties in space. Second, these pre-imposed patterns create electro-osmotic flows powered by the electric field that transport the sorted particles to different locations thus separating them. The demonstrated unique sorting and separation capability opens opportunities in lab-on-a-chip, cell sorting and bio-sensing applications.

Soft Condensed Matter
Microfluidic Separation of Particles from Whole Blood Using Shear Induced Diffusion

Jian Zhou,Chunlong Tu,Yitao Liang,Bobo Huang,Yifeng Fang,Xiao Liang,Ian Papautsky,Xuesong Ye

DOI: https://doi.org/10.1117/12.2255681

2017-01-01

Abstract:Extraction of cells of interest directly from human whole blood is in high demand. However, it is extremely challenging due to the excessive cell populations leading to non-Newtonian hemodynamics. Herein, we describe a simple microfluidic approach to take the advantage of the concentrated cells for direct isolation of larger particles spiked in whole blood, which could shift the current paradigm in cell separation from low volume fraction sample to concentrated suspension and from the Newtonian to non-Newtonian fluid. Our device fabricated in Polydimethylsiloxane (PDMS) via standard soft photolithography. With saline solution flowing in the channel center and splitting the blood sample into two side streams, the spiked larger particles rapidly migrate from the whole blood to the saline stream without external force fields. Our experimental results has suggested such intriguing particle translocation is mainly attributed to the shear induced diffusion in concentrated suspensions as well as the viscoelastic property of blood. Inertial force can also contribute to this process. The harmonic interactions among these passive force fields have successfully led to extraction, focusing and separation of 18.7 mu m -diameter particles from whole blood with a high efficiency (similar to 89%) and a superb throughput (>10(6) cells per second), which outperforms existing approaches such as spiral microchannels. Shortly, we have demonstrated a novel simple and effective separation scheme which directly works for complex bodily samples without a hassle of sample preparation. Our approach is very promising as it holds potential to separate cells from whole blood.
A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.

Yongchao Cai,Zekun Li,Cuimin Sun,Xuan Zhao,Shixiong Wu,Guangyong Huang,Shengchang Tang,Peng Dai,Xiangfu Wei,Hui You,shengchang Tang

DOI: https://doi.org/10.1039/d4lc00260a

2024-07-05

Lab on a Chip - Miniaturisation for Chemistry and Biology

Abstract:Droplet sorting and enrichment, as a prominent field within microfluidic technology, represent a pivotal stage in the manipulation of droplets and particles. In recent times, droplet sorting methods based on lab-on-disk (LOD) have garnered significant interest among researchers for their inherent merits, including high throughput, ease of operation, seamless device integration, and independence from supplementary driving forces. This study introduces a centrifugal force-driven microfluidic chip comprising spiral microchannels. The chip incorporates microhole arrays along the sidewall of the spiral channels, enabling size-based sorting and enrichment of microdroplets under the influence of multiple forces. Firstly, a comparative analysis was performed to assess the influence of the separation port structure and rotational speed on efficiency, and a mechanical modeling approach was employed to conduct kinetic analyses of droplet behavior during instantaneous separation. Those findings demonstrated a good agreement with the experimental results at ω <100 rpm. Subsequently, sorting experiments on homogeneous droplets indicated that repetitive sorting could increase the recovery ratios, RT(α), of high-concentration droplets (20.7%) from 35.3% to over 80%. We also conducted a sorting experiment on three-component homogeneous-phase emulsions using a serially connected chip array, and the sorting throughput was 0.58 mL/min. As a result, the RT(α) for 60 and 160 μm droplets were 99.4% and 88.9%, respectively. Lastly, we conducted elution experiments and dualsample sorting on a single chip, and the fluorescence results demonstrated that this study provided an efficient and non-cross-contaminating sorting method for non-homogenous phase multi-sample microreactor units.
Vortices-interaction-induced Microstreaming for the Pump-Free Separation of Particles.

Ruixue Zhou,Jianxin Yang,YanFeng Zhang,Fangjing Luo,Yilin Chen,Yao Li,Tianyang Luan,Qian Shou,Xiaofang Jiang,Xiaowen Hu,Jiayin Wu,Cong Liu,Huiqing Zhong,Zongbao Li,Ho-Pui Ho,Xiaobo Xing

DOI: https://doi.org/10.1364/ol.430123

2021-01-01

Abstract:Microfluidic techniques have emerged as promising strategies for a wide variety of synthetic or biological sorting. Unfortunately, there is still a lack of sorting with automatic and handy operation. In contrast to passively generated vortices, the thermocapillary vortices produced by temperature gradient have the advantages of flexible manipulation, stable strength, and simple integration. In this Letter, we present a device used for the pump-free separation of particles through vortices interaction without external fluidic control systems required for the majority of existing devices. Specifically, the device induces a different flow type upon the actuation of optical power, and the flow functions, such as simultaneous pumping and sorting, agree with stimulation results very well. More importantly, our developed sorting device can achieve separations by means of tunable cutoff diameter size. Therefore, this versatile device can be utilized to sort complex samples with the advantages of portability, user-friendly control, and automation.
Hybrid microfluidics combined with active and passive approaches for continuous cell separation

Sheng Yan,Jun Zhang,Dan Yuan,Weihua Li

DOI: https://doi.org/10.1002/elps.201600386

Electrophoresis

Abstract:Microfluidics, which is classified as either active or passive, is capable of separating cells of interest from a complex and heterogeneous sample. Active methods utilise external fields such as electric, magnetic, acoustic, and optical to drive cells for separation, while passive methods utilise channel structures, intrinsic hydrodynamic forces, and steric hindrances to manipulate cells. However, when processing complex biological samples such as whole blood with rare cells, separation with a single module microfluidic device is difficult. Hybrid microfluidics is an emerging technique, which utilises active and passive methods whilst fulfilling higher requirements for stable performance, versatility, and convenience, including (i) the ability to process multi-target cells, (ii) enhanced ability for multiplexed separation, (iii) higher sensitivity, and (iv) tunability for a wider operational range. This review introduces the fundamental physics and typical formats for subclasses of hybrid microfluidic devices based on their different physical fields; presents current examples of cell sorting to highlight the advantage and usefulness of hybrid microfluidics on biomedicine, and then discusses the challenges and perspective of future development and the promising direction of research in this field.
A novel electrophoretic assisted hydrophobic microdevice for enhancing blood cell sorting: design and numerical simulation

Xinkun Chen,Xueye Chen

DOI: https://doi.org/10.1039/d4ay00196f

IF: 3.1

2024-04-06

Analytical Methods

Abstract:Microfluidic technology has great advantages in the precise manipulation of micro–nano particles, and the hybrid microfluidic separation technology has attracted much attention due to the advantages of both active and passive separation technology at the same time. In this paper, the hydrophoresis sorting technique is combined with the dielectrophoresis technique, and a dielectrophoresis-assisted hydrophoresis microdevice is studied to separate blood cells. By using the dielectrophoresis force to change the suspension position of the cells in the channel, the scope of the hydrophoresis device for sorting particles is expanded. At the same time, the effects of microchannel width, fluid velocity, and electrode voltage on cell sorting were discussed, and the cell separation process was simulated. This work has laid a certain theoretical foundation for the rapid diagnosis of diseases in practical applications.

spectroscopy,chemistry, analytical,food science & technology
Microfluidic Technology for Cell Separation

BAO Xiao-Fan,LIU Ran,LIU Jing

DOI: https://doi.org/10.3969/j.issn.0258-8021.2013.02.015

2013-01-01

Abstract:In a number of studies in the field of medicine and biology,it has been an important issue faced and being researched by academia,to separate different kinds of cells effectively.If we can separate different types of cells effectively,it will bring great convenience and benefit to the diagnosis and treatment of many diseases,as well as bring breakthrough to medicine and biology.At present,traditional cell separation and screening methods can be divided into two categories: labeling method and non-labeling method.With the development of microfluidics,microfluidic chip is becoming more and more widely used in the field of cell separation.This paper,starting from the research history and progress of microfluidics,combining with comparison of existing traditional cell separation methods and microfluidic technology,provided a review and introduction of microfluidics usage and development in the field of cell separation.
Microfluidic technologies in cell isolation and analysis for biomedical applications.

Jing Wu,Qiushui Chen,Jin‐Ming Lin

DOI: https://doi.org/10.1039/c6an01939k

2017-01-26

In Analysis

Abstract:Efficient platforms for cell isolation and analysis play an important role in applied and fundamental biomedical studies. As cells commonly have a size of around 10 microns, conventional handling approaches at a large scale are still challenged in precise control and efficient recognition of cells for further performance of isolation and analysis. Microfluidic technologies have become more prominent in highly efficient cell isolation for circulating tumor cells (CTCs) detection, single-cell analysis and stem cell separation, since microfabricated devices allow for the spatial and temporal control of complex biochemistries and geometries by matching cell morphology and hydrodynamic traps in a fluidic network, as well as enabling specific recognition with functional biomolecules in the microchannels. In addition, the fabrication of nano-interfaces in the microchannels has been increasingly emerging as a very powerful strategy for enhancing the capability of cell capture by improving cell-interface interactions. In this review, we focus on highlighting recent advances in microfluidic technologies for cell isolation and analysis. We also describe the general biomedical applications of microfluidic cell isolation and analysis, and finally make a prospective for future studies.

Engineering,Medicine,Materials Science
Inertial Separation of Particles Assisted by Symmetrical Sheath Flows in a Straight Microchannel

Tianlong Zhang,David W. Inglis,Long Ngo,Yuling Wang,Yoichiroh Hosokawa,Yaxiaer Yalikun,Ming Li,David W Inglis

DOI: https://doi.org/10.1021/acs.analchem.3c02089

IF: 7.4

2023-07-17

Analytical Chemistry

Abstract:Over the past two decades, inertial microfluidics, which works at an intermediate range of Reynolds number (∼1 < Re 3 μm) are arranged close to the channel sidewalls, while smaller...

chemistry, analytical
Sheathless Focusing and Separation of Diverse Nanoparticles in Viscoelastic Solutions with Minimized Shear Thinning.

Chao Liu,Baoquan Ding,Chundong Xue,Yu Tian,Guoqing Hu,Jiashu Su

DOI: https://doi.org/10.1021/acs.analchem.6b04564

IF: 7.4

2016-01-01

Analytical Chemistry

Abstract:Viscoelastic microfluidics becomes an efficient and label-free hydrodynamic technology to enrich and separate micrometer-scale particles, including blood cells, circulating tumor cells, and bacteria. However, the manipulation of nanoscale particles by viscoelastic microfluidics remains a major challenge, because the viscoelastic force acting on the smaller particle decreases dramatically. In contrast to the commonly used polymer solutions of high molecular weight, herein we utilize the aqueous solutions of poly(ethylene oxide) (PEO) of low molecular weight with minimized shear thinning but sufficient elastic force for high-quality focusing and separation of various nanoparticles. The focusing efficiencies of 100 nm polystyrene (PS) nanoparticles and λ-DNA molecules are 84% and 85%, respectively, in a double spiral microchannel, without the aid of sheath flows. Furthermore, we demonstrate the size-based viscoelastic separation of two sets of binary mixtures-100/2000 nm PS particles and λ-DNA molecules/blood platelets-all achieving separation efficiencies of >95% in the same device. Our proposal technique would be a promising approach for enrichment/separation of the nanoparticles encountered in applications of analytical chemistry and nanotechnology.
Continuous Inertial Microparticle And Blood Cell Separation In Straight Channels With Local Microstructures (Vol 16, Pg 532, 2016)

Zhenlong Wu,Yu Chen,Moran Wang,Aram J. Chung

DOI: https://doi.org/10.1039/c5lc01435b

IF: 7.517

2016-01-01

Lab on a Chip

Abstract:Fluid inertia which has conventionally been neglected in microfluidics has been gaining much attention for particle and cell manipulation because inertia-based methods inherently provide simple, passive, precise and high-throughput characteristics. Particularly, the inertial approach has been applied to blood separation for various biomedical research studies mainly using spiral microchannels. For higher throughput, parallelization is essential; however, it is difficult to realize using spiral channels because of their large two dimensional layouts. In this work, we present a novel inertial platform for continuous sheathless particle and blood cell separation in straight microchannels containing microstructures. Microstructures within straight channels exert secondary flows to manipulate particle positions similar to Dean flow in curved channels but with higher controllability. Through a balance between inertial lift force and microstructure-induced secondary flow, we deterministically position microspheres and cells based on their sizes to be separated downstream. Using our inertial platform, we successfully sorted microparticles and fractionized blood cells with high separation efficiencies, high purities and high throughputs. The inertial separation platform developed here can be operated to process diluted blood with a throughput of 10.8 mL min(-1) via radially arrayed single channels with one inlet and two rings of outlets.
A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Yanping Dang,Qin Zhang,Shuai Hu,Zhiming Ou

DOI: https://doi.org/10.1016/j.jiec.2023.12.060

IF: 6.76

2024-01-01

Journal of Industrial and Engineering Chemistry

Abstract:Microfluidics technology is trustworthy for microparticle operation as it doesn't involve destructive contact. Our research endeavors have encompassed microparticles manipulation by generating swirling flow region (SFR). Now we try to utilize swirl and flow topology to promote microfluidic chip design because serial operation is still not well enabled. Herein, a new model is proposed for a 6-microchannel microfluidic chip, which has realized active control of microparticles. The chip is capable of trapping, transferring, and enriching microparticles, and is applied for microparticles sorting. Simulation is performed to substantiate the viability of generating SFRs, and experiments are conducted on 3D-printed chips to validate the envisioned functions of the proposed microfluidic chip. Encouragingly, our experiments yield convincing outcomes, wherein microparticles are successfully trapped, transferred, and enriched in separated SFRs. With the help of a self-developed vision algorithm, the size sorting of microparticles is facilitated. Significantly, the manipulation of different microparticles can be achieved by tuning the microchannel velocities and tailoring the flow topology. This work presents a pioneering flow field structure and provides a feasible scheme for sorting microparticles, which is a noteworthy advance in swirl-based microfluidic chip applications. It is a potential mean for bio-/chemical analysis and fluidic-directed assembly of multiple microparticles.

engineering, chemical,chemistry, multidisciplinary
A Simple Online Phase Separator for the Microfluidic Mass Transfer Studies

Di Liu,Kai Wang,Yue Wang,Yundong Wang,Guangsheng Luo

DOI: https://doi.org/10.1016/j.cej.2017.05.056

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:A simple phase separator consisting of a hydrophobic T-connector and a hydrophilic needle was developed for microfluidic extraction studies. The phase separator based on the selective wettability of fluids has a very small volume and nearly zero hold-up of the continuous phase. It is easy to assemble, clean and repair in the laboratory. Four classical extraction systems with interfacial tensions ranging from 49.6 to 1.68 mN/m worked well in this phase separator over operating flow rates ranging from 150 and 1500 mu L/ min. Mass transfer experiments showed that the measured mass transfer coefficients from the new phase separator were more accurate than the data from the gravity phase separator. This phase separator has strong potential to be used in the kinetic study of mass transfer in tubular microfluidic device. (C) 2017 Elsevier B.V. All rights reserved.
Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions

Jie Zhang,Shuyue Hou,Qiaorui Cheng,yongsheng wang,Wenxuan Zang,Junping Duan,Binzhen Zhang

DOI: https://doi.org/10.1088/1402-4896/ad3bf1

2024-04-09

Physica Scripta

Abstract:Most of the current microfluidic chips can only achieve a single function, such as sample mixing, particle sorting, etc. Based on this, in this paper, we designed an integrated microfluidic chip that combines micromixers and separators, which can realize both sample mixing and particle sorting functions. We use software to simulate the chip's performance and optimize its structure. The final design of the microfluidic chip consists of two parts: the micro-mixer adopts a V-shaped structure, and there are composite sidewall microstructures and contraction and expansion structures in the flow channel; in the part of the particle sorting, we use a combination of inertial sorting and microfiltration sorting. The chip can ultimately realize rapid short-range sample solution mixing and high-efficiency particle sorting within a specific flow rate, with a mixing effect of more than 94%, a sorting efficiency of up to 100%, and a sorting purity of more than 92%.

physics, multidisciplinary

Solute-particle Separation in Microfluidics Enhanced by Symmetrical Convection.

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Multifunctional Acoustofluidic Centrifuge Device Using Tri-Symmetrical Design for Particle Enrichment and Separation and Multiphase Microflow Mixing

Microfluidic Co-Flow of Newtonian and Viscoelastic Fluids for High-Resolution Separation of Microparticles.

Efficient Microfluidic Particle Separation Using Inertial Pre-Focusing and Pre-Separation Structures Without Sheath Flow

Microfluidic Technology for the Isolation and Analysis of Exosomes

Size-Based Separation of Particles and Cells Utilizing Viscoelastic Effects in Straight Microchannels.

Sorting and separation of microparticles by surface properties using liquid crystal-enabled electro-osmosis

Microfluidic Separation of Particles from Whole Blood Using Shear Induced Diffusion

A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.

Vortices-interaction-induced Microstreaming for the Pump-Free Separation of Particles.

Hybrid microfluidics combined with active and passive approaches for continuous cell separation

A novel electrophoretic assisted hydrophobic microdevice for enhancing blood cell sorting: design and numerical simulation

Microfluidic Technology for Cell Separation

Microfluidic technologies in cell isolation and analysis for biomedical applications.

Inertial Separation of Particles Assisted by Symmetrical Sheath Flows in a Straight Microchannel

Sheathless Focusing and Separation of Diverse Nanoparticles in Viscoelastic Solutions with Minimized Shear Thinning.

Continuous Inertial Microparticle And Blood Cell Separation In Straight Channels With Local Microstructures (Vol 16, Pg 532, 2016)

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

A Simple Online Phase Separator for the Microfluidic Mass Transfer Studies

Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions