Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

RI and Temperature Sensor Based on Hybrid Sensing Mechanism of SPR and MZI Using a Four-Core Fiber

SPR Sensor Based on Cascaded NCF and U-Shaped Multimode Fibers for Simultaneous Detection of Refractive Index and Temperature

D-shaped Single Mode Fiber SPR Sensor for Measuring RI and Temperature Simultaneously

Optical sensing of refractive index (RI) and temperature by dual-channel surface plasmon resonance (SPR) using two single-mode fibers (SMFs) and three multi-mode fibers (MMFs)

V-shaped Micro-Structure Optical Fiber Surface Plasmon Resonance Sensor for the Simultaneous Measurement of the Refractive Index and Temperature

Side-Polished D-Type Fiber SPR Sensor for RI Sensing With Temperature Compensation

Surface Plasmon Resonance Optical Fiber Sensor for Refractive Index Detection Without Temperature Crosstalk

Simultaneous Measurement of Temperature and Refractive Index Based on a Hybrid Surface Plasmon Resonance Multimode Interference Fiber Sensor

Surface Plasmon Resonance Sensor Based on Seven-Core Photonic Crystal Fiber for Refractive Index and Temperature Measurement

Refractive index and temperature sensor based on Mach-Zehnder interferometer with thin fibers

Temperature-Compensated Highly Sensitive Reflective SPR Fiber Sensor Based on Tapered Seven-Core Fiber

A Dual-Channel Surface Plasmon Resonance Sensor for the Liquid Refractive Index and Temperature Measurement Based on Hollow-Core Fiber

Simultaneous and Ultrasensitive Measurement of Refractive Index and Temperature Based on SPR of Hollow-Core Anti-resonant Fibers

Highly Sensitive Cascaded Fiber SPR Sensor with Temperature Compensation

Simultaneous Measurement of Refractive Index and Temperature with High Sensitivity Based on a Multipath Fiber Mach-Zehnder Interferometer

A Hybrid Multimode Interference Structure-Based Refractive Index and Temperature Fiber Sensor

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

A High-Sensitivity SPR Sensor Based on MMF-Tapered HCF-MMF Fiber Structure for Refractive Index Sensing

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Simultaneous Measurement of Refractive Index and Temperature Based on SMF-HCF-FCF-HCF-SMF Fiber Structure

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement