Abstract:In order to achieve a high-precision synchronous detection of two different refractive index (RI) analytes, a D-type surface plasmon resonance (SPR) photonic crystal fiber (PCF) RI sensor based on two channels is designed in this paper. The sensor uses a D-shaped planar region of the PCF and a large circular air hole below the core as the sensing channels. Surface plasmon resonance is induced by applying a coating of gold film on the surface. The full-vector finite-element method (FEM) is used to optimize the structural parameters of the optical fiber, and the sensing characteristics are studied, including wavelength sensitivity, RI resolution, full width at half maximum (FWHM), figure of merit (FOM), and signal-to-noise ratio (SNR). The results show that the channel 1 (Ch 1) can achieve RI detection of 1.36-1.39 in the wavelength range of 1500-2600 nm, and the channel 2 (Ch 2) can achieve RI detection of 1.46-1.57 in the wavelength range of 2100-3000 nm. The two sensing channels can detect independently or simultaneously measure two analytes with different RIs. The maximum wavelength sensitivity of the sensor can reach 30,000 nm/RIU in Channel 1 and 9900 nm/RIU in Channel 2. The RI resolutions of the two channels are 3.54 × 10-6 RIU and 10.88 × 10-6 RIU, respectively. Therefore, the sensor realizes dual-channel high- and low-RI synchronous detection in the ultra-long wavelength band from near-infrared to mid-infrared and achieves an ultra-wide RI detection range and ultra-high wavelength sensitivity. The sensor has a wide application prospect in the fields of chemical detection, biomedical sensing, and water environment monitoring.

Surface Plasmon Resonance Optical Fiber Sensor for Refractive Index Detection Without Temperature Crosstalk

Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)

Plasmonic tapered-fiber interference sensor for simultaneously detecting refractive index and temperature

High-sensitivity photonic crystal fiber sensor based on surface plasmon resonance

Simultaneous and Ultrasensitive Measurement of Refractive Index and Temperature Based on SPR of Hollow-Core Anti-resonant Fibers

Surface plasmon resonance sensor based on coupling effects of dual photonic crystal fibers for low refractive indexes detection

Surface plasmon resonance sensor composed of micro-nano optical fibers for high-sensitivity refractive index detection.

High-Performance Gold-Nanowires-Coated PCF-SPR Sensor for Refractive Index Detection

A High Sensitivity Refractive Index Sensor Based on Microstructure Fiber with Simple Structure and SPR Effect

Experimental study on ultra-high sensitivity gold-based SPR sensor for refractive index and temperature measurement

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

A novel photonic crystal fiber refractive index sensor with ultra wide detection range based on surface plasmon resonance effect

Simultaneous Sensing of Temperature and Refractive Index with D-Shaped Photonic Crystal Fiber Infused with Liquid Crystal

A novel D-shaped photonic crystal fiber refractive index sensor based on surface plasmon resonance effect

Side-Polished D-Type Fiber SPR Sensor for RI Sensing With Temperature Compensation

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection

High sensitivity and wide detection range temperature and refractive index photonic crystal fiber sensor

High-Sensitivity Refractive Index Sensor with Dual-Channel Based on Surface Plasmon Resonance Photonic Crystal Fiber

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Compact Three-Channel Photonic Crystal Fiber Sensor Based on Surface Plasmon Resonance

Wide refractive index detection range surface plasmon resonance sensor based on D-shaped photonic crystal fiber