Abstract:High-rise buildings located in strong wind and earthquake-prone regions are exposed to multiple hazards that must be properly considered to prevent considerable socio-economic losses. In the present study, the Tuned Mass Damper-Inerter (TMDI) is adopted for the structural control of high-rise buildings under wind and earthquake excitations by exploiting its inherent multiple-mode control effects. A generalized multi-degree-of-freedom (MDOF) model of TMDI-controlled structure is established first and compared with the commonly-adopted generalized single-degree-of-freedom (SDOF) model. Analytical investigation on the multiple-mode control effects of TMDI demonstrates that the damping effects weighted by mode coordinate differences at two terminals of TMDI are mainly responsible for its multiple-mode control effects. Based on a real high-rise building project, analysis errors induced by the generalized SDOF model against the more accurate generalized MDOF model are quantified by a comprehensive Monte Carlo simulation, which suggests the necessity of adopting numerical search for parametric design of TMDI under most circumstances. Therefore, the parameters of TMDI and its two competitors, i.e., Multi-Tuned Mass Damper (MTMD) and Multi-Tuned Mass Damper-Inerter (MTMDI), are optimized using a genetic algorithm, assuming both wind- and earthquake-induced responses as performance objectives. Time and frequency domain analyses demonstrate the efficiency of utilizing the multiple-mode control effects of a single TMDI for multi-hazard design. The trend of the equivalent damping ratio of TMDI-controlled structure on an arbitrary mode is analyzed to identify the design parameters affecting most the TMDI multiple-mode control effect at last.

Effectiveness of Installing Multiple Tuned Mass Dampers for Seismic Mitigation of Steel–concrete Wind Turbine Hybrid Tower

Optimization of the Seismic Performance of a Steel-Concrete Wind Turbine Tower with the Tuned Mass Damper

Computational Study of Steel–Concrete Hybrid Wind Turbine Tower Seismic Performance

Effects of soil–structure interaction on the design of tuned mass damper to control the seismic response of wind turbine towers with gravity base

Vibration Control Effect Analysis of PTMD in Wind Turbine Tower Under Multi-Hazard Action of Earthquake and Vortex-Induced Wind

Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower

Vibration attenuation performance of wind turbine tower using a prestressed tuned mass damper under seismic excitation

Seismic response control of tall building using semi-active tuned mass damper considering soil-structure interaction

Structural Vibration Suppression of Wind Turbine Based on Dynamic Vibration Absorption

Particle Tuned Mass Dampers for Wind-Induced Vibration Control in Supertall Building Tower Crowns

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Effects of tuned liquid dampers on the nonlinear seismic responses of high-rise structures using real-time hybrid simulations

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Seismic response analysis of steel–concrete hybrid wind turbine tower

Vibration Control of Steel Wind Turbine Tower Using a Novel Tuned Mass Damper Refitted via Inner Platform

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Load reduction of a monopile wind turbine tower using optimal tuned mass dampers

Parameter Optimization Of Multi-Tmds For Wind-Excited Vibration Suppression Of Tall Buildings

Optimizing Seismic Performance of Tuned Mass Dampers at Various Levels in Reinforced Concrete Buildings

Real-Time Hybrid Simulation of Multi-Story Structures Installed with Tuned Liquid Damper

Seismic Performances of a Structure Equipped with a Large Mass Ratio Multiple Tuned Mass Damper