Abstract:High-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs) have the unique advantages of fast electrode reaction kinetics, high CO tolerance, and simple water and thermal management at their operating temperature (140-200 degrees C), which are considered as one of the important research directions of PEMFCs. Membrane electrode assemblies (MEAs), as the core component of HT-PEMFCs, are usually fabricated by sandwiching phosphoric acid (PA)-doped polymer membrane (HT-PEM) between two electrodes. Technically, high PA content is required in HT-PEMs to ensure fast proton conduction, since PA acts as a proton transport carrier, while a high content of PA decreases the interaction among polymer molecules, thus enhancing the movement of the polymer molecules and leading to a decrease in the mechanical strength of the polymer membranes. In addition, PA is driven into catalyst layers owing to capillary force caused by micropore structures, crack connectivity, and accessibility. The PA content in the electrodes is also affected by the hydrophilic/hydrophobic characteristics of the catalyst layers and the surface tension of the acid when it is in close contact with the catalyst layers. Furthermore, PA plays an important role in the construction of electrochemical triple-phase boundaries to promote electrochemical reactions in the catalyst layers. Simultaneously, as a liquid or "free molecule", the migration of PA may be accelerated by the current and the water produced, owing to the formation of charged phosphates or hydronium ions. This process encourages the redistribution of PA within the catalyst layers, and results in acid flooding of the catalytic layers and adsorption on the surface of the platinum catalyst, leading to increased mass transfer resistance for the gas reaction and reduced catalyst activity. Moreover, the increase in supplied absolute flow rate and the temperature elevation in the HT-PEMFC process could accelerate the evaporation of PA from the electrolyte membrane, resulting in a decrease in the stability of HT-PEMFC and corrosion of the metal end plate. Therefore, it is crucial to regulate the distribution and migration of PA in MEAs for the construction of HT-PEMFCs with high performance and stability. Hence, this paper reviews the research status of PA distribution in HT-PEM electrodes in recent years, and summarizes the corresponding regulations and optimization strategies as well as its future development trend.

Confined Nano-Channels Incorporated with Multi-Quaternized Cations for Highly Phosphoric Acid Retention HT-PEMs

Strategies for Mitigating Phosphoric Acid Leaching in High-Temperature Proton Exchange Membrane Fuel Cells

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Advancement in Distribution and Control Strategy of Phosphoric Acid in Membrane Electrode Assembly of High-Temperature Polymer Electrolyte Membrane Fuel Cells

Poly(triphenylene-piperidine) Membranes Reinforced by Carboxy Intrinsic Microporous Polymers Towards High Output Power at Low Phosphoric Acid Levels for HT-PEMFC

Progress of Phosphoric Acid Doped High Temperature Proton Exchange Membrane for Fuel Cells

Phosphonic acid-imidazolium containing polymer ionomeric membranes derived from poly (phenylene oxide) towards boosting the performance of HT-PEM fuel cells

Phosphoric Acid Based Proton Exchange Membranes for High Temperature Proton Exchange Membrane Fuel Cells

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Intermolecular Acid‐base‐pairs Containing Poly (p‐terphenyl‐co‐isatin piperidinium) for High Temperature Proton Exchange Membrane Fuel Cells

PAF‐6 Doped with Phosphoric Acid Through Alkaline Nitrogen Atoms Boosting High Temperature Proton Exchange Membranes for High Performance of Fuel Cells

Phosphonated Ionomers for Ion-Pair Coordinated High Temperature Pemfcs

A New High Temperature Polymer Electrolyte Membrane Based on Tri-Functional Group Grafted Polysulfone for Fuel Cell Application

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

In situ etching strategy for the preparation of high-temperature proton-exchange membranes with continuous porous proton-transport channels

Tetramethyl poly(aryl ether ketone) modified by DABCO cationic polymer for high temperature proton exchange membrane fuel cells

Porous Proton Exchange Membrane with High Stability and Low Hydrogen Permeability Realized by Dense Double Skin Layers Constructed with Amino Tris (methylene Phosphonic Acid)

High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers

High-performance and Low-Leakage Phosphoric Acid Fuel Cell with Synergic Composite Membrane Stacking of Micro Glass Microfiber and Nano PTFE

Constructing proton transport channels in low phosphoric-acid doped polybenzimidazole membrane by introducing metal–organic frameworks containing phosphoric-acid groups

Improved proton conductivity and mechanical performance of phosphoric acid doped aminated PAF-1 reinforced OPBI for high temperature proton exchange membranes