Abstract:This work focuses on the development of high temperature polymer electrolyte membranes (HT-PEMs) as key materials for HT-PEM fuel cells (HT-PEMFCs). Recognizing the challenges associated with the phosphoric acid (PA) doped polybenzimidazole (PBI) membranes, including the use of carcinogenic monomers and complex synthesis procedures, this study aims to develop more cost-effective, readily synthesized, and high-performance alternatives. A series of superacid-catalyzed polyhydroxyalkylation reactions have been carefully designed between p-terphenyl and aldehydes bearing imidazole moieties, resulting in a new class of HT-PEMs. It is found that the chemical structure of aldehyde-substituted N-heterocycles significantly impacts the polymerization reaction. Specifically, the use of 1-methyl-2imidazole-formaldehyde and 1H-imidazole-4-formaldehyde monomers leads to the formation of high-viscosity, rigid, and ether-free polymers, denoted as PTIm-a and PTIm-b. Membranes fabricated from these polymers, due to their pendent imidazole groups, exhibit an exceptional capacity for PA absorption. Notably, PTIm-a, carrying methylimidazole moieties, demonstrates a superior chemical stability by maintaining morphology and structural stability during 350 h of Fenton testing. After being immersed in 75 wt% PA at 40 degrees C, the PTIm-a membrane reaches a PA content of 152%, maintains a good tensile strength of 13.6 MPa, and exhibits a moderate conductivity of 50.2 mS cm-1 at 180 degrees C. Under H2/O2 operational conditions, a single cell based on the PTIm-a membrane attains a peak power density of 732 mW cm-2 at 180 degrees C without backpressure. Furthermore, the membrane demonstrates stable cycle stability over 173 h within 18 days at a current density of 200 mA cm-2, indicating its potential for practical application in HT-PEMFCs. This work highlights innovative strategies for the synthesis of advanced HT-PEMs, offering significant improvements in membrane properties and fuel cell performance, thus expanding the horizons of HT-PEMFC technology. (c) 2024 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Phosphonic acid-imidazolium containing polymer ionomeric membranes derived from poly (phenylene oxide) towards boosting the performance of HT-PEM fuel cells

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Poly(triphenylene-piperidine) Membranes Reinforced by Carboxy Intrinsic Microporous Polymers Towards High Output Power at Low Phosphoric Acid Levels for HT-PEMFC

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Phosphonated Ionomers for Ion-Pair Coordinated High Temperature Pemfcs

High-performance Imidazole-Containing Polymers for Applications in High Temperature Polymer Electrolyte Membrane Fuel Cells

High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers

3d Network Structural Poly (Aryl Ether Ketone)-Polybenzimidazole Polymer For High-Temperature Proton Exchange Membrane Fuel Cells

Porous Aromatic Framework with Imidazole Group-Reinforced High-Temperature Proton Exchange Membrane with Promoted Proton Transport Efficiency and Power Density

New High-Performance Bulky N-heterocyclic Group Functionalized Poly(terphenyl Piperidinium) Membranes for HT-PEMFC Applications

Tetramethyl poly(aryl ether ketone) modified by DABCO cationic polymer for high temperature proton exchange membrane fuel cells

Achieving 1060 mW cm-2 with 0.6 mg cm-2 Pt Loading Based on Imidazole-Riched Semi-Interpenetrating Proton Exchange Membrane at High-Temperature Fuel Cells.

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

A New High Temperature Polymer Electrolyte Membrane Based on Tri-Functional Group Grafted Polysulfone for Fuel Cell Application

Semi-Interpenetrating High-Temperature Proton Exchange Membranes Based on Cross-Linked Poly(fluorenyl-terphenyl-piperidinium) and Poly(vinylbenzyl Chloride-Co-vinylbenzyl Chloride) for Fuel Cells

Phosphonated Ionomers of Intrinsic Microporosity with Partially Ordered Structure for High-Temperature Proton Exchange Membrane Fuel Cells

Proton Direct Transport Channels Incorporated with Protonated Porphyrin Hyper-Crosslinked Structures for High Proton Conductivity HT-PEMs

PAF‐6 Doped with Phosphoric Acid Through Alkaline Nitrogen Atoms Boosting High Temperature Proton Exchange Membranes for High Performance of Fuel Cells