Abstract:<p>In the present work, an innovative high-throughput method was developed to fabricate a Ti-6Al-4V alloy via pulsed laser melting with water-cooled copper mold. Moreover, a three-dimensional transient model was established via numerical simulation to reveal the dynamic mechanism of heat transfer and fluid flow of the molten pool during high-throughput laser fabrication processes. Different laser powers, laser pulse durations and Marangoni coefficients were adopted to perform the numerical simulations, revealing the underlying physics of the heat transfer and fluid flow during the melting and solidification process. Special attention was paid to the cooling rate of the molten pool affected by cooling water velocity. Numerical results indicated that a "button" sample can be prepared in a short time of 200 ms by adjusting the processing parameters in this high-throughput preparation process. The maximum temperature of the molten pool was attained at the center underneath the laser beam and decreased radially outward. There was vigorous fluid flow mainly driven by thermal-capillary force in the molten pool. With increases in laser power and laser pulse duration, both the peak temperature and velocity of the molten pool increased. Accordingly, a high cooling rate was obtained under high cooling water velocity. Furthermore, the Marangoni effect fully changed the flow direction of the molten pool fluid, and the Marangoni convection flow influenced the temperature distribution of the molten pool. A new principle of the metallurgical dynamic behavior for the high-throughput laser fabrication process was established in this study and can provide technical guidance for high-throughput preparation experiments, such as laser parameter selection, structural control, and performance optimization.</p>

High-speed Synchrotron X-Ray Imaging and Multi-Physics Modeling of Molten Pool and Gas Dynamics in Laser Additive Manufacturing of a Medium-Entropy Alloy

Quantification of melt pool dynamics and microstructure during simulated additive manufacturing

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Thermal evolution behavior and fluid dynamics during laser additive manufacturing of Al-based nanocomposites: Underlying role of reinforcement weight fraction

Research on the Melt Pool Shape Formation Mechanism of the Laser Surface Remelting of Nickel-Based Single-Crystal Superalloy

Monitoring Molten Pool Temperature, Grain Size and Molten Pool Plasma with Integrated Area of the Spectrum During Laser Additive Manufacturing

On the Melt Pool Flow and Interface Shape of Dissimilar Alloys Via Selective Laser Melting

High-speed X-ray Investigation of Melt Dynamics During Continuous-Wave Laser Remelting of Selective Laser Melted Co-Cr Alloy

Molten pool flow behavior and influencing factors in electron beam selective melting of IN738 superalloy

Modeling of the Flow Field and Clad Geometry of a Molten Pool during Laser Cladding of CoCrCuFeNi High-Entropy Alloys

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process

High-throughput laser fabrication of Ti-6Al-4V alloy: Part I. Numerical investigation of dynamic behavior in molten Pool

A Novel Method for the Molten Pool and Porosity Formation Modelling in Selective Laser Melting

Lattice Boltzmann Simulation of Metallic Powder Melting During Additive Manufacturing

Study on laser shock modulation of melt pool in laser additive manufacturing of FeCoCrNi high-entropy alloys

An Integrated Multiscale Model to Study the Marangoni Effect on Molten Pool and Microstructure Evolution

Simulations of Microstructure Coupling with Moving Molten Pool by Selective Laser Melting Using a Cellular Automaton

Combining Synchrotron X-ray Diffraction, Mechanistic Modeling, and Machine Learning for In Situ Subsurface Temperature Quantification during Laser Melting

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

In Situ Characterization of Laser-Generated Melt Pools Using Synchronized Ultrasound and High-Speed X-ray Imaging.