Abstract:4D printing has the potential to create complex 3D geometries which are able to react to environmental stimuli opening new design possibilities. However, the vast majority of 4D printing approaches use polymer based materials, which limits the operational temperature. Here, we present a novel multi-metal electrochemical 3D printer which is able to fabricate bimetallic geometries and through the selective deposition of different metals, temperature responsive behaviour can thus be programmed into the printed structure. The concept is demonstrated through a meniscus confined electrochemical 3D printing approach with a multi-print head design with nickel and copper used as exemplar systems but this is transferable to other deposition solutions. Improvements in deposition speed (34% (Cu)–85% (Ni)) are demonstrated with an electrospun nanofibre nib compared to a sponge based approach as the medium for providing hydrostatic back pressure to balance surface tension in order to form a electrolyte meniscus stable. Scanning electron microscopy, X-ray computed tomography and energy dispersive X-ray spectroscopy shows that bimetallic structures with a tightly bound interface can be created, however convex cross sections are created due to uneven current density. Analysis of the thermo-mechanical properties of the printed strips shows that mechanical deformations can be generated in Cu-Ni strips at temperatures up to 300 °C which is due to the thermal expansion coefficient mismatch generating internal stresses in the printed structures. Electrical conductivity measurements show that the bimetallic structures have a conductivity between those of nanocrystalline copper (5.41 × 106 S.m−1) and nickel (8.2 × 105 S.m−1). The potential of this novel low-cost multi-metal 3D printing approach is demonstrated with the thermal actuation of an electrical circuit and a range of self-assembling structures.

Protocol for 3D and 4D Printing of Highly Conductive Metallic Composite Using Liquid Metal Gels

Metallic gels for conductive 3D and 4D printing

Liquid Phase 3D Printing for Quickly Manufacturing Conductive Metal Objects with Low Melting Point Alloy Ink

High Internal Phase Emulsions Gel Ink for Direct-Ink-writing 3D Printing of Liquid Metal

Suspension printing of liquid metal in yield-stress fluid for resilient 3D constructs with electromagnetic functions

Electrically Induced Wire‐Forming 3D Printing Technology of Gallium‐Based Low Melting Point Metals

Liquid Metal Direct Write and 3D Printing: A Review

3D printing of metals using biodegradable cellulose hydrogel inks

Spatially selective adhesion enabled transfer printing of liquid metal for 3D electronic circuits

On‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing

Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics

Printing 3D Metallic Structures in Porous Matrix

Multi-metal 4D Printing with a Desktop Electrochemical 3D Printer

Multimaterial Microfluidic 3D Printing of Textured Composites with Liquid Inclusions

Volume-Metallization 3D-Printed Polymer Composites

Suspension 3D Printing of Liquid Metal into Self‐Healing Hydrogel

On‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing (Adv. Mater. 20/2022)

3D Printable Polymeric Composite Material with Enhanced Conductivity Achieved by Affinity Matching

3D-printed liquid metal polymer composites as NIR-responsive 4D printing soft robot

Liquid Phase 3D Printing for Quickly Manufacturing Metal Objects with Low Melting Point Alloy Ink

Fabrication of Three-Dimensional Metal Structures Embedded in Hydrogel by Using Femtosecond Laser Ablation and Electroplating.