Abstract:Liquid‐metal alloys are now extensively used for stretchable electronic applications due to their superior electrical conductivity, non‐toxicity, and mechanical stability in micro‐channels. Needle‐injection and direct‐writing are the most popular techniques for patterning micro‐structured liquid metal alloys. However, embedded channels often require a very high pressure to inject liquid‐metal, and direct writing by dispensing is relatively complex due to the low viscosities and high surface tension of the metal which cause liquid to normally dispense in droplets rather than a stream. In this work, a technique to co‐axially extrude liquid‐metal alloy within an encapsulating cover fluid has been presented to obtain a continuous stable stream of liquid‐metal. Fused deposition modeling (FDM) 3D printing has been adapted to co‐extrude a liquid‐metal core with a shell made from a thermoplastic elastomer. A custom extruder system is used to directly produce conductive micro‐wires (diameter: ≈25 μm) of liquid‐metal having an insulating shell of styrene‐ethylene‐butylene‐styrene which can be stretched up to four times the original length without any noticeable mechanical and electrical loss. The system is capable of printing in‐plane conductive pathways as well as out‐of‐plane functional devices with direct‐stable encapsulation of liquid‐metal wires. This technology has been successfully used to print 2D‐pressure and 3D‐strain sensors. A multi‐material extruder system is developed to coaxially extrude a liquid metal core with a thermoplastic elastomer shell. This technology allows direct printing of liquid metal‐based 2D pressure and 3D strain sensors. The technique is capable of producing micro‐wires with liquid metal cores of 25 μm diameter when combined with drawing steps. These micro‐wires are extremely flexible and stretchable up to 300% without substantial mechanical or electrical changes.

Liquid Phase 3D Printing for Quickly Manufacturing Conductive Metal Objects with Low Melting Point Alloy Ink

Liquid Phase 3D Printing for Quickly Manufacturing Metal Objects with Low Melting Point Alloy Ink

Advances in the Development of Liquid Metal-Based Printed Electronic Inks

High Resolution Direct Writing Liquid Metal Patterns for Printed Stretchable Electronics

Electrically Induced Wire‐Forming 3D Printing Technology of Gallium‐Based Low Melting Point Metals

High Internal Phase Emulsions Gel Ink for Direct-Ink-writing 3D Printing of Liquid Metal

Compatible Hybrid 3D Printing of Metal and Nonmetal Inks for Direct Manufacture of End Functional Devices

A Fast and Cost-Effective Transfer Printing of Liquid Metal Inks for Three-Dimensional Wiring in Flexible Electronics.

Spatially selective adhesion enabled transfer printing of liquid metal for 3D electronic circuits

Technical Progress and Industrialization Prospect of 3D Liquid Metal Printing

3D Printing for Functional Electronics by Injection and Package of Liquid Metals into Channels of Mechanical Structures

Design, Analysis, and Experimental Performance of a Novel Micro-Nozzle Based Liquid Metal Direct Writing System

Suspension printing of liquid metal in yield-stress fluid for resilient 3D constructs with electromagnetic functions

Liquid Metal Direct Write and 3D Printing: A Review

Direct 3D Printing of Stretchable Circuits via Liquid Metal Co‐Extrusion Within Thermoplastic Filaments

Printing of liquid metal by electrically modulating of interface tension in liquid environment

Three-Dimensional Coprinting Of Liquid Metals For Directly Fabricating Stretchable Electronics

Liquid Metal Printed Superconducting Circuits

Protocol for 3D and 4D Printing of Highly Conductive Metallic Composite Using Liquid Metal Gels

Printing low-melting-point alloy ink to directly make a solidified circuit or functional device with a heating pen

Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics