Abstract:Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instead uses a rotating tool to heat and stir the materials until they are in a plastic state. The process results in a welded joint with high strength, excellent ductility, and minimal distortion, making it a popular choice in various industries, including aerospace, automotive, and marine. AA6061-T6 (Mg-Si) and AA7075 (Al-Zn-Mg-Cu) aluminum alloys are one of the most popular grades of aluminum alloys used in current manufacturing industries, such as aerospace and automotive, joined by the Friction Stir Welding Process (FSW) technique. Taguchi orthogonal array (L9) experimental design was applied to reduce the number of insignificant factors in the process. First, the study determines three welding factors: rotation speed, travel speed, and pin eccentricity. Investigations found that travel speeds significantly on tensile strength (Ts) and elongation ( %El), but the rotational speed and tool eccentricity did not affect Ts and %El. Furthermore, considering the fabricated parameters on the hardness (HV) of the joint, it was found that all factors unaffected the HV of the joint zone at a 95 % confidence level. Next, examine the microstructure; Mg2Al3 and Al2O3 intermetallic compounds were found in the weld. Therefore, investigating the crystallite size found that welding significantly affects the crystallite size. Finally, consider the fracture surface, experimental condition A2B1C2 (optimal parameter), which is the parameter with the highest tensile strength having dimple fracture characteristics. On the other hand, the welding condition A1B3C3, the parameter with the lowest tensile strength, Small and fine dimple fracture with cleavage fracture. Because the material is highly ductile and can undergo large deformations before it is damaged. On the other hand, materials with low tensile strength exhibiting cleavage fracture indicate that the materials are brittle and can break easily under stress

Mathematical Modeling, Optimization and Prediction of Friction Stir Spot Welding Parameters for Dissimilar Joining AA2024-T6 Aluminium and AZ31B Magnesium Alloy in Lap Weld Configuration

Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloys AA3003 and AA6061 by RSM

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloy by response surface methodology

Optimizing the process parameters in Friction stir Spot Welding Of Dissimilar Aluminum Alloys Using Genetic Algorithm

Modeling and Optimization of Friction Stir Welding Parameters for Joining Dissimilar Aluminum Alloys

Assessment of friction stir spot welding of AA5052 joints via machine learning

Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM

Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties

Experimental investigation of the friction stir welding process of AA5059 and AA7079 and prediction using fuzzy approach

Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology

Friction stir welding parameters optimization for tailored welded blank sheets of AA1100 with AA6061 dissimilar alloy using response surface methodology

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

Comparative Analysis of Predictive Modeling Techniques for Mechanical Properties in Dissimilar Friction Stir Welding of AA6061 and AZ31B

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Statistical and Metallurgical Analysis of Dissimilar Friction Stir Spot Welded Aluminum/Copper Metals

Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints

Generation of regression models and multi-response optimization of friction stir welding technique parameters during the fabrication of AZ80A Mg alloy joints

Joining of Dissimilar Al and Mg Metal Alloys by Friction Stir Welding

Experimental Investigation and Characterization of Friction Stir Spot-Welded Dissimilar Aluminum Copper Metallic Lap Joints