Abstract:Thermal conductivity of soils is significant on the thermal simulations in cold region engineering. Based on the generalized thermal conductivity for geotechnical materials, a thermal conductivity model for saline soil was proposed in this paper. At the micro level, the microstructure composition of sodium sulfate soils in the proposed model was redefined. Macroscopically, the variation of salt crystals and ice crystals with temperature and the relationship between the arrangements of components (i.e., liquid water, ice, soil particles) of saline soil were studied. Shape parameters α, β, τ were adopted to define the volume proportion of needle shape soil particles, spherical shape soil particles and disk shape soil particles, respectively. Besides, the proposed thermal conductivity model considered the heat loss due to the heat radiation in the measurement process. Furthermore, the accuracy of the proposed model was verified by the experimental data. The results showed that the soil particles can be defined as SWCA (i.e., soil particles, water, crystals mixture of salt and ice, air) four-layer concentric structure in the calculation of the thermal conductivity model of saline soil. Shape parameters have significant influence on simulation results. By comparing test data with calculated values, it can be found that at positive temperature, silty clay soil particles are mainly spherical (β = 0.5) and disc-shaped (τ = 0.5), while the sandy soil and soil-rock particles are more similar to the needle shape (α = 1.0). With the decrease of temperature, the particle parameters of silty clay soil change, β decreases to 0, τ increases to 0.75, and α increases to 0.25. However, at negative temperature, the soil particles of sandy soil and loess are still mainly needle-shaped (α = 1.0).

Practical estimation of the thermal conductivity of granular soils considering grading and relative density using three physical parameters

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

Effects of Moisture Content and Dry Bulk Density on the Thermal Conductivity of Compacted Backfill Soil

An Improved Model for Predicting the Thermal Conductivity of Sand Based on a Grain Size Distribution Parameter

A theoretical model for estimating the thermal conductivity of granular geomaterials with low porosity

The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation

A Predictive Model for the Thermal Conductivity of Silty Clay Soil Based on Soil Porosity and Saturation

Constitutive Modeling for Granular Materials Considering Grading Effect

Thermal Conductivity of Biocemented Graded Sands

Influence of Grading on the Undrained Behavior of Granular Materials

Effective thermal conductivity of granular soils: a review of influencing factors and prediction models towards an investigation framework through multiscale characters

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Estimating Hydraulic Conductivity of Naturally Sedimented Clays Using Compression Curves

Experimental Study and Modelling of the Thermal Conductivity of Sandy Soils of Different Porosities and Water Contents

Study on thermal conductivity model of saline soil based on particle morphology

Prediction of the thermal conductivity of freezing soils using the soil freezing characteristic curve

A thermal conductivity model for granular geomaterials with low porosity during the freezing process

Approaches for predicting the soil-water characteristic curves of compacted quartz sand based on particle packing theory

Thermal Conductivity Models of Sandstone: Applicability Evaluation and a Newly Proposed Model

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models

A NUMERICAL MODEL FOR THERMAL CONDUCTIVITY OF SOFT SOILS BASED ON MESOSCOPIC SIMULATION