Abstract:As one of the bottleneck parameters for practical applications of metal oxide semiconductor-based gas sensors, sensitivity enhancement has attracted significant attention in the past few decades. In this work, alternative to conventional strategies for designing sensitive surfaces via morphology/defect/heterojunction control (then operating at an optimized isothermal temperature with a maximal response), a facile enhancement approach by decoupling surface charge exchange and resistance reading process (possessing different temperature-dependent behaviors) through pulsed temperature modulation (PTM) is reported. Substantially magnifying electrical responses of a generic metal oxide (e.g., WO3) micro-electromechanical systems sensor toward diverse analyte molecules are demonstrated. Under the optimal PTM condition, the response toward 10 ppm NO2 can be boosted from (isothermal) 99.7 to 842.7, and the response toward 100 ppm acetone is increased from (isothermal) 2.7 to 425, which are comparable to or even better than most of the state-of-the-art WO3-based sensors. In comparison to conventional (isothermal) operation, PTM allows to sequentially manipulate the physisorption/chemisorption of analyte molecules, generation of surface reactive oxygen species, and sensor resistance reading and thus provides additional opportunities in boosting the electrical response of oxide sensors for advanced health and/or environment monitoring in future.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07626?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07626</a>.Additional characterization data, sensing measurement system, electrical data, and comparison between previous reports and the present work (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07626/suppl_file/am0c07626_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting Room Temperature Sensing Performances by Atomically Dispersed Pd Stabilized via Surface Coordination

Inhibiting Emulative Oxygen Adsorption via Introducing Pt-Segregated Sites into the Pd Surface for Enhanced H2 Sensing in Air

Imparting Chemiresistor with Humidity-Independent Sensitivity toward Trace-Level Formaldehyde via Substitutional Doping Platinum Single Atom

Pd-Catalyzed Reaction-Producing Intermediate S on a Pd/In2O3 Surface: A Key To Achieve the Enhanced CS2-Sensing Performances

Inhibiting Emulative Oxygen Adsorption via Introducing Pt-Segregated Sites into the Pd Surface for Enhanced H 2 Sensing in Air

Stabilizing Single-Atom Pt on Fe2O3 Nanosheets by Constructing Oxygen Vacancies for Ultrafast H2 Sensing

Study on the Gas-Chromic Character of Pd/TiO2 for Fast Room-Temperature CO Detection

Room-temperature response of MOF-derived Pd@PdO core shell/γ-Fe2O3 microcubes decorated graphitic carbon based ultrasensitive and highly selective H2 gas sensor

The Sensitizing Effect of Enhanced NO2 Gas Sensing at Near-Room Temperature Using Pd-Decorated VO2 Nanowires

Theory-guided design of Pd/C nanocomposite for H2 sensing at room-temperature

Boosting Electrical Response toward Trace Volatile Organic Compounds Molecules via Pulsed Temperature Modulation of Pt Anchored WO<sub>3</sub> Chemiresistor

Stepwise emergence of CO gas sensing response and selectivity on SnO2 using C supports and PtOx decoration

Formation of Highly Porous Gas-sensing Films by In-situ Thermophoretic Deposition of Nanoparticles from Aerosol Phase

Generic Approach to Boost the Sensitivity of Metal Oxide Sensors by Decoupling the Surface Charge Exchange and Resistance Reading Process

Pt‐Pd Nanoalloys Functionalized Mesoporous SnO2 Spheres: Tailored Synthesis, Sensing Mechanism, and Device Integration

Preparation of Single Atom Catalysts for High Sensitive Gas Sensing

Surface Defect-Induced Specific Catalysis Activates 100% Selective Sensing toward Amine Gases at Room Temperature

Innovative Thermocatalytic H2 Sensor with Double-Sided Pd Nanocluster Films on an Ultrathin Mica Substrate

Trace Hydrogen Sulfide Sensing Inspired by Polyoxometalate-Mediated Aerobic Oxidation

Preparation and Extraordinary Room-Temperature CO Sensing Capabilities of Pd-SnO₂ Composite Nanoceramics.

A room-temperature chemiresistive NO2 sensor based on one-step synthesized SnO2 nanospheres functionalized with Pd nanoparticles and rGO nanosheets