Abstract:Ti6Al4V is the most used alloy for implants because of its excellent biocompatibility; however, its low wear resistance limits its use in the biomedical industry. The additive manufacturing (AM) of Ti6Al4V is a well-established technique that is being used in many fields. However, the AM of Ti6Al4V composites is currently under investigation, and its manufacture using laser powder bed fusion (L-PBF) would result in a great benefit for many industries. The one-step novel concept proposed uses a gas-controlled L-PBF system that enables the AM of layers with different compositions. Six millimeter-edged cubes of Ti6Al4V were manufactured in an Ar atmosphere and coated with in situ Ti6Al4V/TiN layers by using an Ar–N2 mixture given the direct reaction between titanium and nitrogen. Unreinforced Ti6Al4V presented a martensitic microstructure, and TiN reinforcement dendrites and a minor Ti2N phase were gradually introduced into an α + β basketweave titanium matrix. The composites' microhardness, nanohardness, and elastic modulus were 2, 3, and 1.5 times higher, respectively, than those of the Ti6Al4V. Porosity levels (caused by a lack of fusion, trapping gases, and interdendritic porosity), ranged from 7 to 12% (most measured 20–40 μm) and increased with the reinforcement content (15 to 25%). A scaled-up, proof-of-concept design of a hip implant stem was 3D printed using this nitriding method. Since the neck of the stem (top part) is more susceptible to the fracture and fretting corrosion process, the resulting graded material part consisted of unreinforced Ti6Al4V at the bottom and Ti6Al4V/TiN at the top. This change was controlled by gradually adding nitrogen to the atmosphere; moreover, it was found that the more nitrogen in the chamber, the more TiN reinforcement formed in the part. A microhardness of ~450 HV0.1 was measured at the bottom and gradually increased to ~900HV0.1, with the increment corresponding to the in situ TiN reinforcement amount.

High Wear Resistance of Uniform Nitriding Titanium Composites Fabricated by In-Situ Laser Powder Bed Fusion

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

In-situ additive manufacturing of high strength yet ductility titanium composites with gradient layered structure using N2

Fabrication of TiN-doped Ti Nanocomposites with High Strength and Ductility by Plasma-Assisted Ball Milling and Laser Powder Bed Fusion

Enhanced Wear Resistance of In-Situ Nanoscale TiC Reinforced Ti Composites Fabricated by Additive Manufacturing

Microstructure and Wear Resistance of One-Step In-Situ Synthesized TiN/Al Composite Coatings on Ti6Al4V Alloy by a Laser Nitriding Process

In-situ Synthesis of High-Performance TiN/TC4 Sandwich Structures Via Nitrogen-Controlled Laser Directed Energy Deposition

In-situ laser additive manufacturing of Ti6Al4V matrix composites by gas–liquid reaction in dilute nitrogen gas atmospheres

Effect of Pre-Oxidation on Microstructure and Wear Resistance of Titanium Alloy by Low Temperature Plasma Oxynitriding

Muti-mechanism of the improving wear performance for titanium alloy via laser powder bed fusion

Research on Microstructure and Properties Enhancement of TiN/GH5188 Co-superalloy Composite Fabricated by Laser Powder Bed Fusion

Effect of laser parameters on the mechanical properties of in situ synthesized TiN/Ti3Al composite coatings on Ti6Al4V

A One-Step Novel Method to Fabricate Multigrade Ti6Al4V/TiN Composites Using Laser Powder Bed Fusion

Synthesis of TiN/Ti3Al composite coatings on Ti6Al4V alloy by plasma spraying and laser nitriding

Microstructural Evolution, Mechanical Properties and Tribological Behavior of B4C-Reinforced Ti in Situ Composites Produced by Laser Powder Bed Fusion.

Network structured nano-TiB/Ti composites coating on Ti64 alloy with improved wear properties by direct laser deposition

Improving the Bio-Tribological Properties of Ti6Al4V Alloy via Combined Treatment of Femtosecond Laser Nitriding and Texturing

Refined Microstructure and Ultrahigh Mechanical Strength of (tin + TiB)/Ti Composites in Situ Synthesized Via Laser Powder Bed Fusion

Laser Rapid Forming Processing of TiC Reinforced Nickel-Based Superalloy Composites: Influence of Additive TiC Particle Content

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders