Abstract:The most critical aspect in the assembly of phosphor-converted white light-emitting diodes (pc-WLEDs) is how to stabilize the device in a practical environment. The high applied currents can generate enormous heat up to more than 100 °C, and such a continuous illumination process will lead to serious effects concerning the stability of the device. Therefore, the new search for examples to fully suppress thermal quenching effect is a real challenge. In this study, a novel Eu3+-activated CaMgGeO4 (CMGO) phosphor of olivine type is developed via a conventional solid-state reaction. The results reveal that Eu3+ occupies the low symmetric Ca2+ site of this host. Upon visible-light sensitization at 464 nm, a dominant red emission band with maximum at 612 nm is witnessed. Its full width at half-maximum (fwhm) is merely ∼4.37 nm, and a high color purity of around 94% is achieved. Their corresponding Commission Internationale de L'Eclairage (CIE) coordinates are very close to standard red color coordinates (0.666, 0.333). The influence of concentration and temperature on the optical property has been explored. It has been discovered that the optimized sample (CMGO:0.01Eu3+) is not influenced by the thermal quenching effect and its fluorescent intensity is improved even up to 473 K, which is mainly attributed to the incorporation of abundant trap sites generated by the nonequivalent substitution Eu3+ for Ca2+. After it is integrated into commercially available YAG:Ce3+ phosphor-based pc-WLEDs, the excellent optical parameters of the fabricated WLEDs are evaluated. The correlated color temperature (CCT) varies from cool white (6458 K) to warm (4370 K), and the color rendering index (CRI) increases from 78 to 86 under a high flux operating current of 200 mA. Furthermore, the chromaticity coordinates remain almost stable with the increasing drive current from 200 mA to 1000 mA. It is highly expected that CaMgGeO4:0.01Eu3+ will become a suitable red phosphor for the preparation of white LEDs with high efficiency.

A Negative-Thermal-quenching LaMgAl11O19: Er3+, Sm3+ Phosphor Achieved by Energy Transfer from Er3+ to Sm3+

Large Negative-Thermal-Quenching Effect in Phonon-Induced Light Emissions in Mn4+-Activated Fluoride Phosphor for Warm-White Light-Emitting Diodes.

An orange-yellow-emitting Lu<sub>2-<i>x</i></sub>Mg<sub>2</sub>Al<sub>2-<i>y</i></sub>Ga<sub><i>y< /i></sub>Si<sub>2</sub>O<sub>12</sub>:<i>x</i>Ce<SUP>3+</SUP> phosphor-in-glass film for laser-driven white light

Reducing the cyan-cavity: Lu2MAl4SiO12:Ce3+ (M = Mg, Ca, Sr and Ba) phosphor-in-glass film towards full-spectrum laser-driven lighting

Defect-Enabled Superior Negative Thermal Quenching in Palmierite Ba9La(VO4)7:Eu3+ for WLED In Situ Temperature Measuring

Simultaneous negative thermal quenching luminescence of upconversion and downshifting processes in Al2(WO4)3:Yb/Er phosphors with low thermal expansion

Exploring the luminescent thermometer and optical storage applications in negative thermal quenching phosphor of BaSc2Ge3O10:Pr3+

Efficient Energy Transfer from Trap Levels to Eu3+ Leads to Antithermal Quenching Effect in High-Power White Light-Emitting Diodes

Heterovalent Zr4+/Nb5+‐Cosubstituted Negative Thermal Expansion Luminescent Materials with Anti‐Thermal Quenching Luminescence

Zero-thermal-quenching of LiAl5O8: Eu2+, Mn2+ phosphors by energy transfer and defects engineering

Interplay of Consecutive Energy Transfer and Negative Thermal Expansion Property for Achieving Superior Anti‐Thermal Quenching Luminescence

Efficient and zero thermal quenching Sm3+-activated Li2LaTiTaO7 phosphor for white LEDs

Anti-thermal-quenching red-emitting phosphors based on lanthanide doped negative-thermal-expansion (NTE) hosts

Efficient and zero thermal quenching Sm 3+ -activated Li 2 LaTiTaO 7 phosphor for white LEDs.

Broadband emissions from Lu2Mg2Al2Si2O12:Ce3+ plate ceramic phosphors enable a high color-rendering index for laser-driven lighting

Superior Thermally-Stable Narrow-Band Green Emitter from Mn2+-doped Zero Thermal Expansion (ZTE) Material

Giant enhancement of anti-quenching upconversion luminescence in Sc2W3O12:Er3+/Yb3+ phosphors for temperature sensing

Surface Vibration‐Mediated and Multiphonon Relaxation‐Assisted Antithermal‐Quenching Shortwave Infrared Emission in Ho‐Based Double Perovskite With Long Lifetime

Defect and energy transfer induced abnormal thermally stable and highly efficient narrow-band green emission

Efficient and zero thermal quenching Sm<SUP>3+</SUP>-activated Li<sub>2</sub>LaTiTaO<sub>7</sub> phosphor for white LEDs

Temperature-Dependent Electroluminescence of Phosphor-Converted White LEDs with K₂SiF₆:Mn⁴⁺ below Room Temperature