Abstract:The most critical aspect in the assembly of phosphor-converted white light-emitting diodes (pc-WLEDs) is how to stabilize the device in a practical environment. The high applied currents can generate enormous heat up to more than 100 °C, and such a continuous illumination process will lead to serious effects concerning the stability of the device. Therefore, the new search for examples to fully suppress thermal quenching effect is a real challenge. In this study, a novel Eu3+-activated CaMgGeO4 (CMGO) phosphor of olivine type is developed via a conventional solid-state reaction. The results reveal that Eu3+ occupies the low symmetric Ca2+ site of this host. Upon visible-light sensitization at 464 nm, a dominant red emission band with maximum at 612 nm is witnessed. Its full width at half-maximum (fwhm) is merely ∼4.37 nm, and a high color purity of around 94% is achieved. Their corresponding Commission Internationale de L'Eclairage (CIE) coordinates are very close to standard red color coordinates (0.666, 0.333). The influence of concentration and temperature on the optical property has been explored. It has been discovered that the optimized sample (CMGO:0.01Eu3+) is not influenced by the thermal quenching effect and its fluorescent intensity is improved even up to 473 K, which is mainly attributed to the incorporation of abundant trap sites generated by the nonequivalent substitution Eu3+ for Ca2+. After it is integrated into commercially available YAG:Ce3+ phosphor-based pc-WLEDs, the excellent optical parameters of the fabricated WLEDs are evaluated. The correlated color temperature (CCT) varies from cool white (6458 K) to warm (4370 K), and the color rendering index (CRI) increases from 78 to 86 under a high flux operating current of 200 mA. Furthermore, the chromaticity coordinates remain almost stable with the increasing drive current from 200 mA to 1000 mA. It is highly expected that CaMgGeO4:0.01Eu3+ will become a suitable red phosphor for the preparation of white LEDs with high efficiency.

Temperature-Dependent Electroluminescence of Phosphor-Converted White LEDs with K₂SiF₆:Mn⁴⁺ below Room Temperature

Large Negative-Thermal-Quenching Effect in Phonon-Induced Light Emissions in Mn4+-Activated Fluoride Phosphor for Warm-White Light-Emitting Diodes.

Highly Efficient and Stable Narrow-Band Red Phosphor Cs2SiF6:Mn4+ for High-Power Warm White LED Applications

Green Route Synthesis and Optimized Luminescence of K2SiF6:Mn4+ Red Phosphor for Warm WLEDs

K2SiF6:Mn4+ red-luminescent crystals with high external quantum efficiency (EQEmax of 78%) and high thermal quenching temperature (T1/2 > 500 K) enabling high brightness warm white LEDs

Room-temperature synthesis, optimized photoluminescence and warm-white LED application of a highly efficient non-rare-earth red phosphor

The electronic and optical properties of a narrow-band red-emitting nanophosphor K2NaGaF6:Mn4+ for warm white light-emitting diodes

Luminescence properties and warm white LED application of a ternary-alkaline fluoride red phosphor K 2 NaAlF 6 :Mn 4+ .

Optical Characteristics, Morphology Evolution and Thermal Stability of Novel Red-Emitting Mn4+-activated K2LiAl1-yGayF6 Solid Solution Phosphors for High-Performance Warm WLED

Green Route, Room-Temperature Synthesis and Luminescence Properties of a Non-Rare-earth Doping Zn2+ Based Narrow-Band Red Phosphor for WLEDs

Green Synthesis and Luminescent Properties of Mn&lt;sup&gt;4+&lt;/sup&gt; Doped Red Phosphor for WLED

A prime red phosphor Ca3Gd(AlO)3(BO3)4:Eu3+ with high color purity for low color temperature pc-WLEDs

Narrow-band Red Emitting Phosphor BaTiF6:Mn4+: Preparation, Characterization and Application for Warm White LED Devices.

Efficient and tunable Mn2+ sensitized luminescence via energy transfer of a novel red phosphor Ca19Mn2(PO4)14: Eu2+ for white LED

Epitaxial growth via anti-solvent-induced deposition towards a highly efficient and stable Mn4+ doped fluoride red phosphor for application in warm WLEDs

Synthesis of K 2 SiF 6: Mn 4+ phosphor from SiO 2 powders via redox reaction in HF/ KMnO 4 solution and their application in warm-white LED

Flux-assisted low-temperature synthesis of Mn4+-doped unusual broadband deep-red phosphors toward warm w-LEDs

Synthesis and Luminescence Properties of Mn 4 + Doped K 2 Sif 6 Red Phosphor

Highly Efficient Non-Rare-earth Red Emitting Phosphor for Warm White Light-Emitting Diodes

Efficient Energy Transfer from Trap Levels to Eu3+ Leads to Antithermal Quenching Effect in High-Power White Light-Emitting Diodes

Realizing thermal and moisture stability in the K2Ge1-Ti F6:Mn4+ red phosphors with high efficiency for WLEDs