Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Comprehensive Data-Driven Methods for Estimating the Thermal Conductivity of Biodiesels and Their Blends with Alcohols and Fossil Diesels

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Experiment Investigation on the Liquid Thermal Conductivity of Biodiesel + Diesel Fuel Blends

Blending biomass-based liquid biofuels for a circular economy: Measuring and Predicting Density for Biodiesel and Hydrocarbon mixtures at High Pressures and Temperatures by Machine Learning Approach

Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines

Prediction of Exhaust Gas Temperature of a Diesel Engine Running with Diesel Fuel-biodiesel-1-pentanol Ternary Blends

Essence of Thermal Analysis to Assess Biodiesel Combustion Performance

Characterization and kinetics of diesel-biodiesel blends by non-isothermal thermal analysis techniques

Data-driven Approach for Condition Assessment of a Diesel Engine Powered with Various Biodiesels

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

A Hybrid Soft Sensor Framework for Real-Time Biodiesel Yield Prediction: Integrating Mechanistic Models and Machine Learning Algorithms

On the evaluation of surface tension of biodiesel

Internal combustion engine fuel synthesis, suitability, physical property evaluation using mixing models and backpropagation ANN algorithm

Fast characterization of biodiesel via a combination of ATR-FTIR and machine learning models

Comparative Analysis of Soft Computing Models for Predicting Viscosity in Diesel Engine Lubricants: An Alternative Approach to Condition Monitoring

Using the group contribution method to predict the flash temperature of biodiesel and ethanol mixtures

Artificial neural network based forecasting of diesel engine performance and emissions utilizing waste cooking biodiesel

Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend

Numerical simulation of the combustion chamber and performance analysis of microalgae-based biodiesel/diesel-powered CI engine: An axisymmetric flow approach

Performance and emission characteristics of novel biodiesel-diesel blends: an RSM and ANN approach

Machine learning algorithms for a diesel engine fuelled with biodiesel blends and hydrogen using LSTM networks