Abstract:Biodiesel has emerged as an alternative to traditional fuels with the aim of reducing the impact on the environment. It is produced by the esterification of oleaginous seeds, animal fats, etc., with short-chain alcohols in an alkaline solution, which is one of the most commonly used methods. This increases the oxygen content (from the fatty acids) and promotes the fuel to burn faster and more efficiently. The accurate quantification of biodiesel is of paramount importance to the fuel market due to the possibility of adulteration, which can result in economic losses, engine performance issues and environmental concerns related to corrosion. In response to achieving this goal, in this work, synergy interval partial least squares (siPLS) algorithms in combination with Raman spectroscopy are used for the quantification of the biodiesel content. Different pretreatment methods are discussed to eliminate a large amount of redundant information of the original spectrum. The siPLS technique for extracting feature variables is then used to optimize the input variables after pretreatment, in order to enhance the predictive performance of the calibration model. Finally, the D1-MSC-siPLS calibration model is constructed based on the preprocessed spectra, the selected input variables and the optimized model parameters. Compared with the feature variable selection methods of interval partial least squares (iPLS) and backward interval partial least squares (biPLS), results elucidate that the D1-MSC-siPLS calibration model is superior to the D1-MSC-biPLS and the D1-MSC-iPLS in the quantitative analysis of adulterated biodiesel. The D1-MSC-siPLS calibration model demonstrates better predictive performance compared to the full spectrum PLS model, with the optimal determination coefficient of prediction (R2P) being 0.9899; the mean relative error of prediction (MREP) decreased from 9.51% to 6.31% and the root--mean-squared error of prediction (RMSEP) decreased from 0.1912% (v/v) to 0.1367% (v/v), respectively. The above results indicate that Raman spectroscopy combined with the D1-MSC-siPLS calibration model is a feasible method for the quantitative analysis of biodiesel in adulterated hybrid fuels.

Fast characterization of biodiesel via a combination of ATR-FTIR and machine learning models

Fast Characterization of Biomass Pyrolysis Oil Via Combination of Atr-Ftir and Machine Learning Models

Rapid Determination of Componential Contents and Calorific Value of Selected Agricultural Biomass Feedstocks Using Spectroscopic Technology

Combination of Integrated Machine Learning Model Frameworks and Infrared Spectroscopy Towards Fast and Interpretable Characterization of Model Pyrolysis Oil

[A Fast Classification Method for Petroleum Products Based on the Raman Spectroscopy].

[Fast Discrimination of Edible Vegetable Oil Based on Raman Spectroscopy].

Rapid Prediction Of Fatty Acid Composition Of Vegetable Oil By Raman Spectroscopy Coupled With Least Squares Support Vector Machines

Rapid measurement of biodiesel conversion rate by near-infrared spectroscopy

Discriminant Analysis and Cluster Analysis of Biodiesel Fuel Blends Based on Fourier Transform Infrared Spectroscopy (FTIR)

Improving the CFPP property of biodiesel via composition design: An intelligent raw material selection strategy based on different machine learning algorithms

Investigation and optimization of biodiesel production based on multiple machine learning technologies

Fourier Transform Infrared Spectroscopy (FTIR) and Multivariate Analysis for Identification of Different Vegetable Oils Used in Biodiesel Production

A Structured Framework for Predicting Sustainable Aviation Fuel Properties using Liquid-Phase FTIR and Machine Learning

Quantitative Analysis of Biodiesel Adulterants Using Raman Spectroscopy Combined with Synergy Interval Partial Least Squares (siPLS) Algorithms

A Hybrid Soft Sensor Framework for Real-Time Biodiesel Yield Prediction: Integrating Mechanistic Models and Machine Learning Algorithms

Blending biomass-based liquid biofuels for a circular economy: Measuring and Predicting Density for Biodiesel and Hydrocarbon mixtures at High Pressures and Temperatures by Machine Learning Approach

Interpretable machine learning assisted spectroscopy for fast characterization of biomass and waste

Research on Prediction Method of Fatty Acid Content in Edible Oil Based on Raman Spectroscopy and Multi-Output Least Squares Support Vector Regression Machine

Rapid Characterization Of Fatty Acids In Oleaginous Microalgae By Near-Infrared Spectroscopy

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach