Abstract:It is vital to explore sustainable and highly efficient catalysts for the oxygen reduction reaction (ORR) with increasing energy demand. Herein, a cobalt (Co) atom dispersed on an N-doped carbon nanosphere catalyst (denoted as ) was designed and constructed by a simple precursor-engineering method. The regulation of heteroatoms and Co metal atoms in precursors introduces more defects and thus reduces the degree of graphitization in the catalyst. The high N content of 5.23 at% in the catalyst provides abundant N sites to anchor metallic Co atoms, which further increases the defects for enhanced catalytic activity. The obtained with an ultralow loading of Co (only 0.041 wt %) exhibits an onset potential of 1.05 V, a limited-diffusion current density of 4.74 mA/cm<sup>2</sup>, and a half-wave potential of 0.79 V for the ORR under alkaline conditions, comparable to those of commercial Pt/C (1.06 V, 4.58 mA/cm<sup>2</sup>, and 0.81 V, respectively). Therefore, the synergistic effect of heteroatoms and Co metal atoms is beneficial for tuning the carbon matrix defects, which leads to the improvement of ORR activity. The Koutecky–Levich equation and rotating ring-disk electrode tests reveal a complete four-electron oxygen reduction pathway, impeding hydrogen peroxide generation. Moreover, nearly 93.8% of the current is retained for after 10 h stability testing without any morphological structural collapse. Meanwhile, it demonstrates superior tolerance to methanol. Our discovery opens a door to engineering the defects of carbon catalysts through introducing ultralow loading of non-noble metal atoms on substrates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03197?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03197</a>.**Polarization curves of catalysts for temperature regulation; TEM and HAADF-STEM graphs; TGA curves of catalysts; XRD and Raman analysis of ECo-900; XPS C1s spectra of catalysts; additional cyclic voltammogram and LSV data; stability testing data; methanol resistance testing data; K–L plots and electron number; cycling performance of Zn-air equipped battery data; and element analysis results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03197/suppl_file/ae0c03197_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Engineering Defective Co3O4 Containing Both Metal Doping and Vacancy in Octahedral Cobalt Site As High Performance Catalyst for Methane Oxidation

A judicious hetero-dopants injection and abstraction of Co3O4 catalyst for efficient methane oxidation

Construction of defective cobalt oxide for methane combustion by oxygen vacancy engineering

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst

Acid etching induced defective Co 3 O 4 as an efficient catalyst for methane combustion reaction

Defect-engineered Cobalt-Based Solid Catalyst for High Efficiency Oxidation of Sulfite

Activation of Co-O Bond in (110) Facet Exposed Co3O4 by Cu Doping for the Boost of Propane Catalytic Oxidation.

Anionic defects engineering of Co3O4 catalyst for toluene oxidation

Activation of Co-O bond in (110) facet exposed Co 3 O 4 by Cu doping for the boost of propane catalytic oxidation

Structure-induced Hollow Co3O4 Nanoparticles with Rich Oxygen Vacancies for Efficient CO Oxidation

Engineering Cobalt Oxide with Coexisting Cobalt Defects and Oxygen Vacancies for Enhanced Catalytic Oxidation of Toluene

Engineering Defective Mnδ+-OV Active Structure in Α-Mno2 for Efficient Low-Temperature CO Oxidation

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

Optimization sulfur doping of electronic structure with metal active center for defect-rich FeCo bimetallic hydroxyl oxide catalysts

Defect Engineering on CuMn2O4 Spinel Surface: A New Path to High-Performance Oxidation Catalysts.

Optimization of Carbon‐Defect Engineering to Boost Catalytic Ozonation Efficiency of Single Fe─N4 Coordination Motif

Engineering Morphology and Ni Substitution of Ni x Co 3– x O 4 Spinel Oxides to Promote Catalytic Combustion of Ethane: Elucidating the Influence of Oxygen Defects

Promotion of oxygen vacancies and metal-support interaction over 3DOM Au/CeO 2 catalyst for CO oxidation

Tracking the Role of Defect Types in Co3O4 Structural Evolution and Active Motifs During Oxygen Evolution Reaction

Revealing the intrinsic nature of Cu- and Ce-doped Mn3O4 catalysts with positive and negative effects on CO oxidation using operando DRIFTS-MS

Homogeneously Co/Ce Co-Doped Amorphous MnOx Microspheres with Abundant Oxygen Vacancy for Catalytic Combustion of Propane