Abstract:Grain boundary (GB) strengthening of metallic materials faces limitations as grain sizes are reduced to the nanoscale, primarily due to the transition from the strengthening to the softening effects. Understanding the intrinsic mechanisms behind such pronounced transitions is essential for optimizing the mechanical properties of nanocrystalline (NC) alloys. In this work, the critical grain size responsible for this transition is determined for NC CoCrNi medium-entropy alloys using molecular dynamics simulation, and the underlying mechanisms concerning varying temperatures and strain rates are systematically investigated for the samples with the critical grain size. The transition from Hall-Petch (HP) strengthening to Inverse Hall-Petch (IHP) softening is established by decreasing the average grain sizes from 21 nm to 3 nm. The critical grain size for the current alloys is estimated to be 12 nm, and the underlying deformation mechanisms are illustrated as follows: In the IHP regime, GB-mediated deformation becomes dominant, leading to softening. Conversely, in the HP regime, dislocation slip dominates the deformation mode, contributing to strengthening. It is found that an increase in temperature from 77 K to 1100 K leads to a decrease in the average flow stress and Young's modulus. Meanwhile, the deformation mechanisms change from dislocation slip (77K-700K) to GB-mediated deformation (700 K-1100 K). Furthermore, the underlying mechanisms correlating to the critical strain rate are uncovered. It can be attributed to the shift in deformation mechanisms from dislocation slip at relatively low strain rate regimes (5 x 10(7) s(-1)-2 x 10(9) s(-1)) to dislocation drag at relatively high strain rate regimes (2 x 10(9) s(-1)-5 x 10(9) s(-1)). Our atomistic insights into the tensile response of NC CoCrNi may provide a crucial basis for designing superior properties to meet the growing demands of advanced engineering fields.

Revealing the Deformation Mechanisms of 〈110〉 Symmetric Tilt Grain Boundaries in CoCrNi Medium-Entropy Alloy

Revealing the deformation mechanisms of symmetric tilt grain boundaries in CoCrNi medium-entropy alloy

Effects of Lattice Distortion and Chemical Short-Range Order on the Mechanisms of Deformation in Medium Entropy Alloy CoCrNi

Effect of Grain Size, Temperature, and Tensile Strain Rate on Mechanical Response of CoCrNi Medium-Entropy Alloys

Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation

Dynamic impact behavior and deformation mechanisms of Cr(26)Mn(20)Fe20Co(20)Ni(14) high-entropy alloy

Phase Reversion Mediated the Dual Heterogeneity of Grain Size and Dislocation Density in an Equiatomic CrCoNi Medium-Entropy Alloy

Enhancing Strength-Ductility Synergy of CoCrNi-Based Medium-Entropy Alloy Through Coherent L1 2 Nanoprecipitates and Grain Boundary Precipitates

Influence of Grain Boundary Segregation on the Deformation Behavior of Nanocrystalline Ni50Co50 Solid Solution Alloys Investigated by Molecular Dynamics Simulations

Plastic Deformation Mechanism and Defect Patterning under Nanoindentation in Medium Entropy Alloy CoCrNi

Grain Boundary Decohesion by Nanoclustering Ni and Cr Separately in CrMnFeCoNi High-Entropy Alloys.

Nanoscale Indentation-Induced Crystal Plasticity in CrCoNi Medium-Entropy Alloys Containing Short-Range Order

Probing Deformation Mechanisms of Gradient Nanostructured CrCoNi Medium Entropy Alloy

Chemical short-range order dependence of micromechanical behavior in CoCrNi medium-entropy alloy studied by atomic simulations

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition

TRIP-TWIP effect in deformation mechanisms of Co–Cr–Ni medium entropy via molecular dynamics simulations

Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

Real-time Atomic Deformation Behavior of Nano CoCrCuFeNi High-Entropy Alloy

Tensile deformation behavior of twist grain boundaries in CoCrFeMnNi high entropy alloy bicrystals

Impact of edge dislocation and grain boundaries on mechanical properties in CoCrCuFeNi high entropy alloy