Abstract:The gas hydrates in the pore space constitutionally affect the mechanical properties of gas hydrate-bearing sediments. The hydrates contribute to the mechanical properties of hydrate-bearing sediments by densifying, bearing and bonding effects. A discrete element model of hydrate-bearing silt was established by randomly filling hydrate particles into a silt-sized granular skeleton reservoir. Three ideal types of hydrate-bearing silt, namely, distributed particulate hydrate-bearing silt (type I), cluster hydrate-bearing silt (type II) and cemented cluster hydrate-bearing silt (type III) are proposed to study the mechanical effects of hydrate. One-dimensional loading (oedometer test) was applied to the numerical sample to investigate its stress evolution, volume change, bond degradation, coordination condition and stress transmission. The main conclusions are as follows. Type III sample exhibits a convex stress path due to bonding and then the stress path gradually returns to the pseudo linear stress path of type I sample due to bond breakage. The compression curve for the type II or type III sample exhibits a structural yield stress, which corresponds to abrupt bond breakage; the compression curves for types I, II and III evolve to be approximately coincident with each other at the end of compression. The average coordination number Z in type II or type III is approximately constant before widespread bond breakage, and then it will evolve to the curve of type I; the inflexion stress of the coordination numbers corresponds to the structural yield stress. The greatest magnitude of the mean stress bearing by hydrates in type II or type III sample is near the structural yield stress; the mean stresses ps - hb$$p_{{\text{s - h}}}^{{\text{b}}}$$ and ph - hb$$p_{{\text{h - h}}}^{{\text{b}}}$$ (created by bonded silt-hydrate and hydrate-hydrate contacts, respectively) in type III sample first increase under compression and then decrease due to widespread bond breakage, and they are exceeded by ps - hu$$p_{{\text{s - h}}}^{{\text{u}}}$$ and ph - hu$$p_{{\text{h - h}}}^{{\text{u}}}$$ (created by unbonded silt-hydrate and hydrate-hydrate contacts, respectively) after reaching the structural yield stress.

Strength and Wear Behaviors of Methane Hydrate-Bearing Silty Sand: Insights from Multi-Reversal Direct Shear Tests

Mechanical Properties and Strength Criterion of Clayey Sand Reservoirs During Natural Gas Hydrate Extraction

Strength behaviors of CH4 hydrate-bearing silty sediments during thermal decomposition

Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

Undrained triaxial tests on water-saturated methane hydrate–bearing clayey-silty sediments of the South China Sea

Study on the shear mechanics of gas hydrate-bearing sand-well interface with different roughness and dissociation

Stress-strain response and deformation behavior of hydrate-bearing sands under different grain sizes: A particle-scale study using DEM

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Strengthening and Weakening of Methane Hydrate by Water Vacancies

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

Mechanical Behaviours of Gas-Hydrate-bearing Clayey Sediments of the South China Sea

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

Mechanical Behavior of Hydrate-Bearing Clayey-Silty Sediments in the South China Sea: Strain-Rate Dependency

Experimental Investigation on Methane Hydrate-Bearing Sediment Permeability under a Wide Range of Conditions

Microscopic Mechanism Analysis of Influence of High Effective Confining Pressure on Mechanical Properties of Hydrate-Bearing Sediments

A bounding surface model of methane hydrate-bearing carbonate sand-silt mixtures

Deformation mechanisms of coexistence type methane hydrate-bearing sands: A particulate-scale investigation

Microstructure evolution of hydrate‐bearing sands during thermal dissociation and ensued impacts on the mechanical and seepage characteristics

Influence of hydrate participation on the mechanical behaviour of fine-grained sediments under one-dimensional compression: a DEM study

Study on Shear Strength of Artificial Methane Hydrate

Influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments using the discrete element method