Abstract:Monitoring the geometry of an moving element is a crucial task for example in robotics. The robots equipped with fiber bend sensor integrated in their arms can be a promising solution for medicine, physiotherapy and also for application in computer games. We report an all-fiber intensity bend sensor, which is based on microstructured multicore optical fiber. It allows to perform a measurement of the bending radius as well as the bending orientation. The reported solution has a special airhole structure which makes the sensor only bend-sensitive. Our solution is an intensity based sensor, which measures power transmitted along the fiber, influenced by bend. The sensor is based on a multicore fiber with the special air-hole structure that allows detection of bending orientation in range of 360°. Each core in the multicore fiber is sensitive to bend in specified direction. The principle behind sensor operation is to differentiate the confinement loss of fundamental mode propagating in each core. Thanks to received power differences one can distinguish not only bend direction but also its amplitude. Multicore fiber is designed to utilize most common light sources that operate at 1.55 μm thus ensuring high stability of operation. The sensitivity of the proposed solution is equal 29,4 dB/cm and the accuracy of bend direction for the fiber end point is up to 5 degrees for 15 cm fiber length. Such sensitivity allows to perform end point detection with millimeter precision.

Exceptional-point-enhanced Sensing in an All-Fiber Bending Sensor

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Parallel Farby–Perot Interferometers in an Etched Multicore Fiber for Vector Bending Measurements

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

Fiber-Optic Bend Sensor Using Lp21 Mode Operation

A double-cladding fiber curvature sensor based on the extrinsic Fabry-Perot interferometer

Exceptional–point–enhanced phase sensing

A Fiber Sensor for Different Curvature Measurement Based on Nano-Erbium-ytterbium Co-Doped Fiber Cascade Structure As Both Source and Sensor

Optical Fiber Bending Sensor Based on Michelson Interferometer

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Temperature-compensated fiber directional-bend sensor based on a sandwiched MMF–PMPCF structure

An In-Fiber Dual Air-Cavity Fabry–Perot Interferometer for Simultaneous Measurement of Strain and Directional Bend

All-fiber intensity bend sensor based on photonic crystal fiber with asymmetric air-hole structure

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Sensitivity-Improved Curvature Sensor Based on Microwave-Photonic Fiber Ring Resonator