Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Admittance Control for Robot Polishing Force Tracking Based on Reinforcement Learning

Variable Force Tracking Control Via Online Learning

Variable Admittance Control for Robotic Contact Force Tracking in Dynamic Environment Based on Reinforcement Learning

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Admittance control design and system testing of industrial robot polishing operation

Finite-time SMC-based Admittance Controller Design of Macro-Micro Robotic System for Complex Surface Polishing Operations

Research on Contact Steady-state Adaptive Force Tracking of Robot Grinding and Polishing

An Adaptive Control Method for Robot Constant Force Polishing Device

Contact Force Detection and Control for Robotic Polishing Based on Joint Torque Sensors

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Enhanced Admittance Control for Time-Varying Force Tracking of Robots in Unknown Environment

Robot Automatic Polishing Technology of Curved Parts Based on Adaptive Impedance Control

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Active Admittance Control with Iterative Learning for General-Purpose Contact-Rich Manipulation

An Adaptive Impedance Control Method for Polishing System of an Optical Mirror Processing Robot

Learning Force Control for Contact-Rich Manipulation Tasks With Rigid Position-Controlled Robots

Contact Force Control of Robot Polishing System Based on Vision Control Algorithm

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Research and application on force control of industrial robot polishing concave curved surfaces

Adaptive fractional-order admittance control for force tracking in highly dynamic unknown environments