Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Admittance control design and system testing of industrial robot polishing operation

Adaptive Control of Vertical Stage of A Robot Arm for Wafer Handling

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

A Pareto-Optimal-Based Fractional-Order Admittance Control Method for Robot Precision Polishing

Research and application on force control of industrial robot polishing concave curved surfaces

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Active Compliance Smart Control Strategy of Hybrid Mechanism for Bonnet Polishing

PD-adaptive variable impedance constant force control of macro-mini robot for compliant grinding and polishing

Development of Sensorless Force-Control-Based End-Effector for Automated Robot Polishing

Suppress Vibration on Robotic Polishing with Impedance Matching

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Contact Force Detection and Control for Robotic Polishing Based on Joint Torque Sensors

A polishing force control strategy for robot pneumatic end-effector based on adaptive sliding mode backstepping algorithm

Research on fuzzy impedance force control technology of robot-assisted abrasive cloth wheel polishing blade

Active Admittance Control with Iterative Learning for General-Purpose Contact-Rich Manipulation

Adaptive fractional-order admittance control for force tracking in highly dynamic unknown environments

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

An adaptive impedance control method for blade polishing based on the Kalman filter

An improved rational Bezier model for pneumatic constant force control device of robotic polishing with hysteretic nonlinearity

Adaptive friction compensation control of robotic pneumatic end-effector based on LuGre model