Time-Resolved Detection of Multi-Parameter in a Kerosene-Fueled Combustor Using Tunable Diode Laser Absorption Spectroscopy

Ping Fu,Lingyun Hou,Xing Chen,Zhenhai Wang

DOI: https://doi.org/10.2139/ssrn.4379468

2023-01-01

Abstract:Non-contact and real-time measurements for species concentration and temperature with high-time resolution in real-field combustion environments are desired. A laser absorption system was developed for simultaneous sensing of CO, H2O concentrations and temperature with 1 kHz in a centrally staged kerosene-fueled combustor. An absorption feature near 4.98 μm in the mid-infrared region was selected for CO detection to minimize spectral interference with other combustion species in the kerosene combustion environment. Two spectral lines of H2O near 1.4 [[EQUATION]] were used for temperature and H2O detection using a direct scan absorption strategy. The method of the developed multi-parameter measurement was validated in a laboratory-scale plat flame under various equivalence ratios. Comparisons were made between the experimental and theoretical results within the error of 5%. Real-field, time-resolved and in-situ measurements of temperature, H2O and CO concentration in the kerosene-fueled staged combustor were demonstrated. The transient characteristics of CO emission in different conditions were captured experimentally. It is found that the fluctuation amplitude of CO concentration increases as the equivalent ratio decreases during the pilot stage work only. There is a dramatic rise in CO emissions during the transition of combustion conditions. Strong fluctuation occurs with a low frequency at 32 Hz near lean blowoff. The location of the flame surface and the dynamic pressure have a significant coupling relationship with CO emission by analyzing measured data with high time resolution simultaneously.