Abstract:High‐precision servo motor control has been a challenging problem due to the multiple disturbances such as the friction, the load variation and the wide/narrow‐band torque disturbances. Particularly, the discontinuous and fast time‐varying friction is very difficult to be compensated, which tends to trigger the undesirable limit cycle. In addition, the friction is a function of the angular velocity, which makes the online compensation extremely hard in the absence of velocity measurement. To make the matter worse, the nonvanishing narrow‐band torque disturbances in some applications often cause residual vibrations if they are not sufficiently rejected. To address these problems, a robust motor control method, which can effectively reject the multiple disturbances without velocity measurement, is proposed in this article. To be specific, an adaptive hybrid model, which includes an adaptive neural network and a sign function, is employed to compensate the discontinuous and fast time‐varying friction dynamics. Furthermore, by incorporating the internal models of the narrow‐band disturbances into the plant, a resonant extended state observer is designed to estimate the remaining lumped disturbance. To derive the high‐order derivatives of the angular position, a fixed‐time‐convergent differentiator is employed. Different from the previous studies, elaborately designed filters are introduced in the adaptive laws. In this way, the possible degradation of transient performance and stability robustness caused by the adaptive control can be effectively avoided. The closed‐loop stability can be rigorously proved by using the Lyapunov theory. Finally, extensive experiments are performed on a servo motor to validate the effectiveness of the proposed method.

Multilayer Neurocontrol of Servo Electromechanical Systems with Disturbance Compensation

Adaptive Robust Control of a Class of Motor Servo System with Dead Zone Based on Neural Network and Extended State Observer.

An Intelligent Nonlinear Control Method for the Multistage Electromechanical Servo System

Multilayer neuroadaptive constraint-handling control architecture for a family of nonlinear systems with uncertainty compensation

Finite-Time Convergent Multiple Disturbance Rejection Control for Electromechanical Actuators

Multilayer neurocontrol of high‐order uncertain nonlinear systems with active disturbance rejection

Neuroadaptive Control of Saturated Nonlinear Systems with Disturbance Compensation

Compensation Function Observer-Based Backstepping Sliding-Mode Control of Uncertain Electro-Hydraulic Servo System

Disturbance Observer‐based Robust Motor Control Enhanced by Adaptive Neural Network in the Absence of Velocity Measurement

Adaptive neural network output feedback robust control of electromechanical servo system with backlash compensation and disturbance rejection

Design and Application of an Anti-Disturbance Composite Nonlinear Servo Controller

Adaptive Dynamic Surface Control Using Nonlinear Disturbance Observers for Position Tracking of Electro-Hydraulic Servo Systems

Twin-Motor Servo Drive Control Based on RL and Perturbation Observer

Compensation-based Characteristic Modeling and Tracking Control for Electromechanical Servo Systems With Backlash and Torque Disturbance

Nonlinear control of mechatronic servo system based on neural network

Nonlinear Hybrid Controller Design for Perturbed Quadrotor Robot by Uncertainties

Robust Motion Control Of High Precision Mechanical Servo Systems With Parameter Uncertainties

Precision Motion Control for Electro-Hydraulic Servo Systems with Noise Alleviation: A Desired Compensation Adaptive Approach

Active disturbance rejection adaptive control of multi-motor synchronized driving system

Neural Active Disturbance Rejection Output Control of Multimotor Servomechanism

Intelligent Adaptive Jerk Control With Dynamic Compensation Gain for Permanent Magnet Linear Synchronous Motor Servo System