Abstract:A novel multiple‐gradient‐structured medium‐Mn steel is successfully fabricated by cyclic torsion. An outstanding simultaneous improvement in yield strength, ultimate tensile strength, and tensile toughness is achieved in the gradient sample. A persistent transformation‐induced plasticity effect and heterogeneous‐deformation‐induced (HDI) hardening over the entire uniform strain range are conducive to excellent ductility/toughness. The HDI strengthening and dislocation strengthening primarily contribute to the high strength. A multiphase‐gradient‐structured medium‐Mn steel with dislocation/stacking fault (SF) density gradient, austenite fraction gradient, and grain size gradient is designed and fabricated by cyclic torsion. It exhibits higher yield strength (YS) (942 MPa), ultimate tensile strength (1295 MPa), and tensile toughness (290 mJ mm−3) than its homogeneous counterpart (672, 1273 MPa, and 278 mJ mm−3, respectively). High‐density‐interlaced SFs are generated at the surface region because of the change in strain path and stress state during cyclic torsion. These massive interactive SFs promote the persistent martensite transformation of the retained austenite in the surface region within the entire uniform strain range. Therefore, in addition to the central layer, the surface region in the gradient structures provides strong strain hardening. Moreover, the continuous martensite transformation in the surface region allows the gradient structure to be retained even after tensile failure, which is beneficial for improving the heterogeneous‐deformation‐induced (HDI) hardening of the gradient‐structured sample during tensile deformation. Thus, the combination of active and persistent transformation‐induced plasticity effect and HDI hardening contributes to its excellent tensile toughness and ductility. Quantitative analysis indicates that HDI strengthening and dislocation strengthening play a dominant role in the sample's ultrahigh YS.

Insight into the Mechanism of Gradient Fine Grains for Super Strength-Ductility Behavior

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Abnormal Grain Growth: A Potential Way to Construct Gradient Structure

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility

PSA and clinical responses to celecoxib in a patient with prostate cancer and bone metastases.

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Gradient nanostructured steel with superior tensile plasticity

Twin density gradient induces enhanced yield strength-and-ductility synergy in a S31254 super austenitic stainless steel

Integrated modeling of the gradient structure evolution during surface mechanical grinding treatment: formation mechanism and mechanical properties

Improvement of strength and ductility in a gradient structured Ni fabricated by severe torsion deformation

Superior Yield Strength and High‐Tensile‐Toughness Matching of Medium‐Mn Steel with Gradient Structure Developed by Cyclic Torsion

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Simultaneous Improvement of Yield Strength and Ductility at Cryogenic Temperature by Gradient Structure in 304 Stainless Steel

Investigation of mechanical properties and microstructural evolution in Cu─Al alloys with gradient structure

Gradient Microstructure Design in Stainless Steel: A Strategy for Uniting Strength-Ductility Synergy and Corrosion Resistance

Enhanced Mechanical Behaviors of Gradient Nano-Grained Austenite Stainless Steel by Means of Ultrasonic Impact Treatment

Microstructure Evolution and Mechanical Properties of Austenite Stainless Steel with Gradient Twinned Structure by Surface Mechanical Attrition Treatment