Abstract:Silicon (Si) has been recommended as one of the most promising candidate for next generation of anode in lithium-ion batteries mainly because of its highest ever known theoretical gravimetric capacity of 3579 mAh g at room temperature. However, the Si experiences a dramatic volume change during the reaction with lithium ions, finally resulting in the damage of the anode structure and fast capacity fading of the battery. The nanostructuring of Si has recently attracted great attention due to its capability to maintain the structural stability. Focusing on promoting the lithium storage properties in terms of gravimetric capacity, rate capability, and cycling stability, diverse exciting Si nanostructures and their hybrids have been designed and exploited. For instance, we have developed a novel Si-C nanohybrid in which Si nanowires dwell in the hollow graphitic tubes, which creates efficient channels for the fast transport of both electrons and lithium ions and provides spaces for the free expansion of Si nanowires during cycling. Impressively, this structural design resulted in remarkable electrochemical performance of 1100 mAh g at 4.2 A g over 1000 cycles. Despite of these improvements, one critical parameter correlating to the practical application of Si has long been neglected. In general, the low tap density of Si in the anodes directly lowers volumetric capacity reflecting volumetric energy density, and increases the use of other inactive additives like binders and carbon black capable of reducing the gravimetric capacity as well. As a result, it is urgently required to design new electrode structure, for example, by engineering both the individual materials unit and the materials ensemble, namely, a nanoscale system engineering strategy. In this report, we propose and develop a novel electrode configuration following this strategy. The wellordered perforated Si nanowires are conformally coated with the graphitic carbon sheets, and interconnected through an underlying layer, thus forming a mechanically robust, free-standing textured silicon@graphitic carbon nanowire array. Such a unique electrode structure has been designed simultaneously at the individual materials unit scale and the materials ensemble scale. Specifically, the perforated NW array were proposed to provide satisfactory void space for the free expansion of Si during lithiation, while the graphitic carbon coating addresses the interfacial instability issue, thus the structural stability can be readily realized. Furthermore, thanks to the nanowire array geometry with only ~10 wt % content of carbon introduced in the electrode, the tap density of Si reaches a significantly high value of ~0.9 g cm. Benefiting from such an integrated design protocol, the electrode exhibits high volumetric capacity, competing rate capability, and remarkably stable cycling performance (e.g. 1500 mAh cm after 200 cycles). Coupled with a simple and scalable production protocol, the electrode architecture developed represents a significant advance in developing Si-based electrodes practically applicable to next-generation lithium ion batteries.

Mountain-Protection-Mesh-Inspired Psi@Ppan/Cnts Composites As Stable Anode Materials for Lithium-Ion Batteries

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

Structure and Conductivity Enhanced Treble-Shelled Porous Silicon As an Anode for High-Performance Lithium-Ion Batteries

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

Layered Porous Silicon Encapsulated in Carbon Nanotube Cage As Ultra-Stable Anode for Lithium-Ion Batteries

Scalable synthesis of micrometer-sized porous silicon/carbon composites for high-stability lithium-ion battery anodes

Constructing a Stable Integrated Silicon Electrode with Efficient Lithium Storage Performance through Multidimensional Structural Design

A Novel Approach to Synthesize Micrometer-Sized Porous Si/SiOx@C with Internally and Externally Interweaved CNTs As a High Performance Anode for Lithium-Ion Batteries

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

Building sandwich-like carbon coated Si@CNTs composites as high-performance anode materials for lithium-ion batteries

SiO 2 nanoparticles anchored on hollow porous carbon shells for high stability lithium-ion battery anodes

Interface Engineering of Silicon and Carbon by Forming a Graded Protective Sheath for High-Capacity and Long-Durable Lithium-Ion Batteries

Three-Dimensional Porous Si and SiO2 with In Situ Decorated Carbon Nanotubes As Anode Materials for Li-ion Batteries

Textured Silicon@Graphitic Carbon Nanowire Arrays for Advanced Lithium-Ion Batteries

Necklace-like Si@C Nanofibers As Robust Anode Materials for High Performance Lithium Ion Batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes.

An Anode Material for Lithium Storage: Si@N,S-Doped Carbon Synthesized via In Situ Self-Polymerization

Embedding Silicon Nanoparticle in Porous Carbon Fiber for Highly Stable Lithium-Ion Battery Anode

Enabling the Transport Dynamics and Interfacial Stability of Porous Si Anode Via Rigid and Flexible Carbon Encapsulation for High-Energy Lithium Storage

A Novel Durable Double-Conductive Core-Shell Structure Applying to the Synthesis of Silicon Anode for Lithium Ion Batteries